How to install CCTV Cameras Using video baluns + network cable. 

You are a very good professor. There is no way that someone who would learn from you will leave without taking in some knowledge.❤❤

Brilliant 🎉🎉🎉i see my dream is fulfilled... I have a CAT6 ethernet roll was wondering where to use it in this wireless networks world...now you have just given me the secret .. CCTV installations... Thanks so much!!

This is the definition of tutorials. Not rushed & well explained. Keep it up. Just subscribed. Please do more videos

I have been waiting for these tutorial for long

Best explanation I have ever heard!!!

can u imagine am doing construction in iraq but yo work really taught me a lot ,really appreciate u

Great tutorials!

The best explanation on how to connect a cctv camera.

U are my Ghana brother..yes from your accent...am in Nigeria 🇳🇬 ♥️ ❤️...bro I will follow you bompa to bompa thanks a lot for the tutorial

Thanks for the explanation. Greetings from Brazil!

This was very helpful. Thank you.

Came in late but have learnt alot. Thanks from Kenya.

Thanks you for detailed explanation on your video tutor i really do appreciate it because you have given more insight about the connection and installation of my cameras setup

Another Great video! Thanks again Eddie J. Long Island N.Y

Thank You so much!!!

Very good video. Thank you

Good job thanks greetings from Ghana. Best tutorial and the voice is calm for education

Thanks for your video I learned alot

Very very clear!!

Very clear explanation thank you sir

Thanks you so much, its easy to learn from you sir.

Very informative

very good & well explained thankyou sir

Good explanation nice one

Good work sir

thanks u so much

Very useful

great video. you gained a follower in me

Hello. Thank you for your video. Very nice indeed ! Is there any reason why to choose this particular pair for the signal and not another? I'm asking because the 4 pairs have different twisting pattern...

Thank you

Thank U Sir

Thank you for the well explained video, I have problem, I connected my camera using the balunes but I did not have the male and female power connector, so I used the orange and wite orange for the video and had them plugged into the balunes, and I connected the grean pair directly, but camera did not work!? Any advice?!

What ethernet cables are you using sir? The pure copper or the cca? I heard cca cables are not recommended for analog cctv

Please i want to ask with this kind of connections will it also support audio too

Hey, enjoyed your video. I’m installing a camera for a boat in the engine room so it’s displayed on the radar video feed in the wheelhouse and they already had a cat5e ethernet wire ran and can’t run a different wire. I grabbed a balun connector and did what was recommended in this video only difference is there’s a rca jack going into the radar, so I got a bnc to rca converter cable. Will this work for single video If I just use the bnc to rca connector and no recording? I’m having some issues and the camera won’t display doing this. Just trying to make sure im not doing anything wrong. Figured I’d ask someone with more experience like yourself while I’m trying to troubleshoot this issue. Also, can you power the camera with the box into an outlet and just use the solid green and striped green to display video on the bnc? Or do you have to use all of the Ethernet wire? Assuming you don’t have to use the other 6 if you have power coming from somewhere else. Thanks for the video as well.

Will you join another cable to extend the pair’s you’ve chosen to go to the power bridge if you were to use the power supply unit ( what cable will be that)

Which one is the economic to use between the use of Siamese coaxial and CAT 6 with baluns

Please do you available videos on camera audio setup on the nvr and trip wire setup for motion sensor? Please thanks

Can we connect BNC terminal with a pair of wires for each +ive and -ive instead of single wire for video terminals ?

When after fixing the bullet outdoor camera and it sometimes turns black and white the later goes to colored, what could be the cause of it?

is there a limit of distance for utp cable to have a good results of voltage and camera?

Hello. I enjoyed the lectures. Can cat5 or 6cable take analog camera to 700meters

What's maximum length of cable used for powering cctv camera in order to get the exact power for the camera?

What is the benefit of using balum on short and long distance?

dose distance of the cat6 matter ,in terms of long in meters ranges like 100m ,90m.80,?

Can i ask how many meters is the limit using this cat6 cable? Can it be use for a hundred meters? Or less? Whats the exact working lenght? Thankyou in advance for the answer.

Hello. I'm setting up cameras 120 meters away. Someone recommended I double the cables on the balun for better signal on long distances. Also can I run 4 cameras on a single cat6 cable while having the power supplied locally

Boss if you have multiplr cameras like 20,will you still use adapter?

Is it normal to supply 12v battery to 12v camera? Will current affect affect the functionality of the camera

But on the video ballon instructions…it’s says ….No power required

Hello sir, isee uve used two video baluns on one camera, what happens when u have 4 cameras

With this setup can I control my ptz camera and also will I have audio from the camera to the nvr? Please thanks

Does this mean that I can connect any camera to dvr closed loop system? Nothing connected to network?

Can i use 1 cat6 cable for 2 cameras

Good afternoon...if been following you nue for sometime..i just want to how to connect 2 AHD cameras to a 1 Cat 6 cable

12v 1.5A or 12v 2a power adapter is okay to supply quality power the 2mp camera please thanks

Sir can i use a power supply unit in combination with a 12v connector? I mean a DC power supply unit in the end of the DVR with a 12 v connector at the camera?

5 Hd cameras connect to cat6 cable but Dvr connect How adapters using video baluns Dc power supply

Can we use all 4 pairs for dc power connection?

Please we’ll like to see a video of adding external mic on cctv’s to dvr/nvr. Thanks

Nice vid..how many amperes is the 12v power supply?

An i use video balun to 300m cable coaxial because the image not good but in the tester good

How long in meters to run video and power along utp cable?

Be blessed, the pressure is decrease

How log distance will work ?

Pls are these cameras ip or analog??

Sir I love ❤❤ your video tutorial sir i would love if you can show how we can connect cat 6 cable to the CCTV power supply I would appreciate it ❤❤

Please can you video on ONVIF IP camera to nvr

❤

Please how long can someone learn this work with an cctv camera engineer . I really like to learn it

what is the DVR

Will audio work on cameras with audio??

Am inquiring whether you handle professional classes for camera installation.?

Does cat6 give the same picture quality as Coaxial cable?

Why not share the cat6 cables into 2 for the power and signals respectfully, so we can also have strong signal

Good morning How can I reach you

How to seting ip in one network

Supposed you have 30 camera how many power charger will you require

wireless dumnut

Good explanation nice one

Good explanation nice one