How to Install Corbeau Forza Racing Seats in an Acura Integra

Подписаться 7 тыс.

Просмотров 3 тыс.

50% 1

I've always wanted racing seats! These are a cool affordable option if you're in the market for some!
______________________________
PROJECT PARTS AND TOOLS
Milwaukee M12 FUEL Stubby 3/8 in Impact amzn.to/3bqFFOR
Milwaukee 3/8 Ratchet amzn.to/3sLZRTC
Impact Socket Set amzn.to/39TMbNr
Plastic Trim Tools amzn.to/353MMvm
Hex Sockets amzn.to/2M9J1x9
Torque Wrench amzn.to/364dpQm
***
The Seats and Sliders I Installed from Corbeau (Not Sponsored)
Forza - corbeau.com/forza/
Seat Brackets - corbeau.com/acura-integra-94-...
______________________________
CONNECT WITH ME
Instagram: @rayregno @rayregnogarage
For Business Inquiries ONLY: rayregno@gmail.com
______________________________
FTC LEGAL DISCLAIMER
Some links found in the description box of my videos may be affiliate links. This means that when you purchase products or services using these links, I will make a commission on these sales. This is free for you and is one way to support the channel so that I can keep buying more parts and tools and make more videos! Thanks in advance for your support!
______________________________
LIABILITY DISCLAIMER
Please use the information in this video at your own risk. Neither Ray Regno nor Stronghold Garage will be held responsible for any damages, injury, or loss that could arise from using any information in this video.
______________________________
#acuraintegra #corbeauseats #forza

Авто/Мото

Опубликовано:

20 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@roXusJDM 2 года назад

This is a really good tutorial you earned a sub my integra brother

@rayregnogarage 2 года назад

Thanks!

@tunlaw6435 2 года назад

When I heard you say you're from Spokane I was hooked, because I also drive an integra.

@rayregnogarage 2 года назад

Nice. Are You in Spokane, too?

@bronxzauce 3 года назад

Plz don’t let this Channel die 🥺

@rayregnogarage 3 года назад

Why would I do that? haha

@bryanlarrea2867 2 года назад

Id recommend getting the pci seat brackets w/ sliders if you can side mount this seat. You can also tilt the seat back a little more with side mount brackets like the PCI's. I sit real low in my ek hatch with the pci brackets and a Cusco vios 3 seat. My seating position is close to a 370z nismo with the oem nismo recaro's

@rayregnogarage 2 года назад

Thanks for the tip! My wife hates how upright the seats are! I’ll have to check when I get to the shop but I think these seats are bottom mount. I’ll have to come up with some sort of adapter. Any suggestions for those?

@bryanlarrea2867 2 года назад

@@rayregnogarage I guess the only way to lower those would be to remove the sliders. I don't think bottom mount seats can be tilted either. IMO I wouldn't do any extensive modifications to the seat or bracket as that could void passing tech inspection if your going out on a track day

@rayregnogarage 2 года назад

Ya, I’ve found if I move my seat back a and slouch a little, my head isn’t so close to the roof anymore. haha

@EdzHDx 3 года назад

Yo so I just got me a wide forza seat too. Going into my 92 eg hatch. I was told the hatch needs to be gutted so it can fit. I see you got full interior. You got any hitting or rubbing issues in your teggy ?

@rayregnogarage 3 года назад

It’s a tight fit. but no rubbing. it’s easier to put the seatbelt on with the door open. but i will be getting a harness bar and 4 or 5 point

@rayvee9302 2 года назад

yo… how do you like these seats? i’m thinking about getting them for my em2. i’m also a san diego moved to central eastern washington. i’m 2 hours west of spokane.

@rayregnogarage 2 года назад

I really like them. The only thing that I don't like is that I'm short and when I have the seat all the way forward, My forehead almost hits the visors. I actually drive with the seat pushed back and I slouch. But otherwise, I like them much better than the factory seats. Those things were tired.

@sean-matthewbumagat9155 3 года назад

Heyy i just recently picked up the dc2 recaros but they didn’t come with the brackets, just wondering if the corbeau set mounts can fit the recaros???

@rayregnogarage 3 года назад

I’m going to guess not. But honestly don’t know. You could email them and ask though. Sorry!

@Grudge69 8 месяцев назад

I know this an old video but only place ive seen these installed on an inegra. I want to grt the wide version which are 1.5" wider in each width dimension. So with the shoulder veing 3/4 inch closer to the door panel would there still be no rubbing?

@rayregnogarage 8 месяцев назад

not sure might have to take the door cards our worst case.

@nowaydudehuh8145 3 года назад

Quick question you think these will fit in a 93 integra? Just ordered one driver seat with rails. i got full interior and i see u do to. So hopefully my seat will fit with no issues. Any feedback would be appreciated! And sweet dc4 by the way!✌

@rayregnogarage 3 года назад

I LOVE the 93 body style. I’ve never been in one though so I’m not really sure about the fitment with these seats. It’s a little tight putting the seatbelt on with the door closed.

@nowaydudehuh8145 3 года назад

@@rayregnogarage thanks for the feedback. I think it should fit. The da9 are little more roomy than the 3rd gen integra i think so hopefully no issues will pop up ✌

@James-eh6jh 3 года назад

Im starting to like integras more lol!

@rayregnogarage 3 года назад

hahahaha. I have some Ranger content too...will post that tomorrow or Saturday. but I haven't posted anything on this car in over a year. lol. Need to show it a little love.

@conman7975 2 года назад

Spokane Washington?

@rayregnogarage 2 года назад

Yup

@Epic_Badger 2 года назад

Can I ask how tall you are? I am looking into a set of Corbeaus, but head room is a concern for me in these cars.

@rayregnogarage 2 года назад

I'm only 5'4". With the seat all the way up, there's no way i could fit a helmet using these sliders. When I drive around won, I push the seat back a little and slouch in the seat so I'm not so far forward, but that wouldn't be good for racing. I saw a video on Donut Media where they ran corbeaus and had the same problem in a 350z. You might need custom seat brackets. That's what they did.

@Epic_Badger 2 года назад

@@rayregnogarage but this is one of their fixed seats with the thicker base height correct? My problem is I am 6’ and long in the torso so fitment is a issue.

@rayregnogarage 2 года назад

@@Epic_Badger Yes, it's a fixed seat, but I have the Corbeau sliders made for this seat so I can slide the seats forward and back. The sliding mechanism puts the back of the seat about 2.5 maybe 2 3/4 inch above the floor. If you got a custom seat mount that is fixed, you can get the seat to mount lower toward the floor. There is also a metal perch that the seat mounts sit on. If you cut that out and made the floor completely flat, you could gain another couple inches of room and the seats could mount directly to the floor. But you'd definitely some custom fab to make that work. Also.. as you sit further back, the roof is higher.

@rayregnogarage 2 года назад

Someone else commented below about using PCI brackets to mount the seats, but that only works with seats that have side mounts. These seats mount from the bottom. I haven't looked to see if there is a side mount adapter for these seats, but that might get a little more headroom if they were mounted that way.

@rayregnogarage 2 года назад

I just got done talking to Forza Customer Support. The Forza doesn't support side mount. You might want to look into a seat that does.. though they seem to be the pricier ones.

@jasonhoover2590 2 года назад

Bro im in spokane tooo

@rayregnogarage 2 года назад

Nice. What do you drive?

@jasonhoover2590 2 года назад

@@rayregnogarage 2001 integra

@ashtonwakkinen9874 3 года назад

ayo! i’m currently 5’6, how comfy are these?

@rayregnogarage 3 года назад

I like them. I picked them because I have wide shoulders. If you want seats that hold you in really good, keep your dimensions and the dimensions of the seat into consideration. They are super comfy. Drove 17 hours straight to Vegas and did it again come back home and they were more comfortable than the factory seats.

@halfmoongarage 3 года назад

After ordering one of these seats, I noticed that they are not recommended for people over 6 foot. I’m almost 5’ 11” so I’m a bit nervous about being able to safely run these seats with a 4 point harness. Atleast I know they will be comfortable. Nice integra btw!

@rayregnogarage 3 года назад

I dig that Volvo!!! I’m only 5’4” and I’m worried about hitting my helmet on the roof let alone a cage if I build one. ill have to ditch the sliders for sure

@halfmoongarage 3 года назад

@@rayregnogarage thanks, luckily the Volvo has a lot of head room.

@rayregnogarage 3 года назад

@@halfmoongarage Super cool. I wanna get one of those too!

@Noe-st2nl 2 года назад

Hey I plan on getting these seats and I’m 6’ 0” did these leave you with any head room?

@halfmoongarage 2 года назад

@@Noe-st2nl i have just enough room that I’m sure I can drive with a helmet on. Just make sure the hole for the harness won’t be to low in relation to your shoulders. If you are a wide built person I’d suggest the xl. I fit in the standard one but I’m sure the xl would feel better.