Тёмный

How To Install Crown Moulding With Indirect Lighting (RGBIC LED Light Strips On The Ceiling) Govee 

Jumper man Tech
Подписаться 101 тыс.
Просмотров 86 тыс.
50% 1

How To Install LED LIGHT STRIPS On The Ceiling With Crown Moulding (RGBIC LED Light Strip/LED Strip Light Across Ceiling) Step By Step
GOVEE LED LIGHTS CONTROLLED BY CELL PHONE/BLUEOOTH/WIFI
Install Crown Molding With Indirect Lighting
Govee Rgbic Led Strip Lights 16.4 Feet
amzn.to/37vg8n0
Govee Rgbic Led Strip Lights 32.8 Feet
amzn.to/3fZuO2J
Govee RGBIC LED Strip Lights 65.6 Feet
amzn.to/341U83U
Dap White Caulk
amzn.to/3zj1VpB
Loctite Power Grab Construction Adhesive
amzn.to/32PxZp8
RGBIC Superiority
Smart IC Chip: Independently control the LED module and display multiple colors on a line at the same time.
Segmented Color Control: Customize the color and brightness for every segment.
Enhanced Music Mode: Ultrasensitive mic easily syncs to any type of music.
Cool Lighting Effects: Creative mode gives you complete control of your atmosphere.
See vivid colors constantly chasing or flowing like a rainbow. Say goodbye to dull RGB solid-colored lighting.
Voice control: use simple voice commands to manage your led lights with Alexa or Google Assistant
Rgbic effect: each strip can display 15 different colors simultaneously, creating colorful vibes
Wireless control: manage your light strips from anywhere with wifi via the Govee Home app
Transform your home: the strip lights can easily liven up your bedroom, kitchen, or living room
Easy installation: stick your lights to a clean, flat surface and reinforce them with clips
Multiple light strips are controlled by a Govee Home APP, as well as your voice through selected Alexa Google devices
Govee Dreamcolor led strip lights works with Alexa and Google Assistant now. Use simple conversation starters to turn your lights on and off, make them brighter and swap them to your favorite color, currently compatible with Echo and Google Home.
Bluetooth connection enables you to play with 16 million colors, DIY your preferred color, set multiple scenes mode via "Govee Home" app. More functions like flashing, timer setting, music sync is ready for you to explore.
A controller box with 3 simple buttons which can stick to wall is for your better experience. Just press to switch on / off, adjust brightness, change colors of the led lights set.
By using the " Govee Home " APP timer functions, you can set the right time, right color mode for wake up lighting.
Set a schedule for the lights to automatically turn on and off on your schedule that will dispel you or your baby’s fear of the dark.
Unique music mode, Built-in high sensitivity mic, spectrum with light and colors adjusting automatically base on the ambient sound.
Dim the lights, turn on some music when your party begins. It will make your party time unforgettable. Enjoy your party show with millions of colors.
Suitable for indoor decorations, can be used in anywhere in your home, create your favorite ambience.
Can be used for Christmas, party, wedding, and New Year's decorations.
Adjustable brightness and multiple colors and RGBIC Rainbow Effects enable you to DIY the bedroom. Dim the light and set a favorite color by remote controller without leaving your bed. What an amazing led strip lights it is!
Turn on the music when your party begins. Dance with your friends in dynamic lighting mode and vibrant light colors. An excellent strip lights to fire up the party.
Follow me on instagram! @JumperManTech
For all inquiries E-mail JumperManTech@Gmail.com

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 76   
@stevenoest
@stevenoest Год назад
My man is a Milwaukee enjoyer. I trust this guy!
@izzybell11
@izzybell11 2 года назад
Stunning !!! Thank you for detailed and well explained project. I saw a number of videos of how to install LED lights but you made yours easy and simple without complicated building of moldings. Great job. Thank you for sharing JMT.
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! Glad you liked it!! You're welcome. Appreciate the feedback ⚡ Stay tuned for new videos every week! 🔧
@upkar7657
@upkar7657 2 года назад
can you give us the link to the molding as well?
@nicolerennie
@nicolerennie 2 года назад
this is incredible!!! would love this for my apartment, TY for the idea🌟🌟🌟
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! It would be a great addition for any home. You're welcome⚡ Stay tuned for new videos every week! 🔧
@Toebex
@Toebex 2 года назад
You got a nice place man, great installation. Im looking to do something very similar to my bedroom with warm LED lighting
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! This would Definitely transform your entire bedroom. It's amazing. Thanks for watching & commenting ✌⚡
@thesilentonevictor
@thesilentonevictor 2 года назад
The man is at it again for the new years in style lol great job 👍
@JumpermanTech
@JumpermanTech 2 года назад
Gotta start the new year in style haha happy new years! Stay tuned for new videos every week! ✌⚡
@joaoluis3687
@joaoluis3687 10 месяцев назад
This was exactly the video I was looking for
@Beech1217
@Beech1217 2 года назад
Good call on the gloves homie.
@JumpermanTech
@JumpermanTech 2 года назад
Haha 👌 Thanks for watching!
@jeremysart
@jeremysart Год назад
Dude, love your taste, very postmodern. I’m currently installing the same Govee lights in a very similar molding in my 80’s room
@sofatayragaming9296
@sofatayragaming9296 Год назад
Hello friend, it looks amazing indeed, can you please advise where you got this crown molding, I wanna do the same
@felixduran8936
@felixduran8936 2 года назад
Could you put the link for the moulding please?
@MC...
@MC... 2 года назад
Man that was pretty cool! gonna have to do that sometime 🤘🤘🔥🔥
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! You really should. It's so much better in person too. Thanks for watching⚡ Stay tuned for new videos every week! 🔧
@alexmasso6759
@alexmasso6759 2 года назад
Super cool and informative. Thank you!!!!
@TOGthatoneguy
@TOGthatoneguy 11 месяцев назад
thats a clean install man.
@rf421
@rf421 2 года назад
that looks fking sick. im going to try your way this weekend in my office
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! It really is so cool. Appreciate the feedback & good luck with your office!
@johnnybolen5701
@johnnybolen5701 2 года назад
That is awesome bro, it's amazing to watch. thanks for the video 😎
@JumpermanTech
@JumpermanTech 2 года назад
It really is awesome. It's so much better in person too💯 You're very welcome & thanks for watching!
@laustpeternielsen-norman9569
@laustpeternielsen-norman9569 2 года назад
It looks fantastic, would have loved to see it Music mood
@EilandMeisje85
@EilandMeisje85 10 месяцев назад
If you use a pin nailer you wouldn’t have to cut the pieces into smaller pieces since there is a straight guideline. Just pin as you go. Great tutorial
@kassidyspence7695
@kassidyspence7695 9 месяцев назад
Great video
@JumpermanTech
@JumpermanTech 9 месяцев назад
Thank you!
@ChilledTarnished
@ChilledTarnished 10 месяцев назад
guys, head to any lowes and check out the molding section -- it's the only non-wood molding.
@MitziKatzPersians
@MitziKatzPersians Год назад
How is the molding glowing? What exact molding is that and where did you buy it? I want to look for that in my local area. Dude. This is the best result I’ve ever seen. Please respond :)
@raulcabronero5649
@raulcabronero5649 Год назад
Hi .. can you please specify whats the name of both plastic moulding you use here? Where you ourchase it? Home depot? I need to do this on my room
@케이-o8r
@케이-o8r 6 месяцев назад
Great video! Big thanks! Did you cover the led straps with any other cover? If you didn't do that, how can the light line on ceiling is uniformed? I guess there are many LED IC, so the reflect light on the ceiling should be spot and spot.
@paulstephens9274
@paulstephens9274 Год назад
Total coolness- Perhaps you can advise which ones for my dining room more specifically though for shower niche. Also behind crown above walk-in shower they may need be 12VDC waterproof P65. Would you go with neon or RGBW?
@7628739
@7628739 2 года назад
This is so awesome, you are the bomb!
@kurumit7241
@kurumit7241 2 года назад
Definitely looking to do this to my house. Why did you select 4 inches, is this the minimum clearance between ceiling to LED strip so it does not show the individual bulbs?
@JumpermanTech
@JumpermanTech 2 года назад
Awesome! I selected 4 inches because it looked good to me by the eye. It's all up to you and whatever you like but 4 inches looked like a sweet spot. Thanks for watching!
@bploan8464
@bploan8464 7 месяцев назад
Thanks!
@JumpermanTech
@JumpermanTech 7 месяцев назад
Thank you so much! Very much appreciated 🙏⚡️
@bumfluffmcregor3730
@bumfluffmcregor3730 2 года назад
How far is it from top of your moulding to ceiling thanks
@JumpermanTech
@JumpermanTech 2 года назад
4 inches! Check out the full video & I explain everything 🙃 Stay tuned for new videos every week!
@BrucePhung
@BrucePhung 2 года назад
wow. I love how you did it. I am going to do the same.
@LgDubDub
@LgDubDub 2 года назад
What moulding did you use?
@JumpermanTech
@JumpermanTech 2 года назад
1:40 Thanks for watching!
@abdunnurnosib
@abdunnurnosib 2 месяца назад
​​@@JumpermanTech Some people want to know the details about the molds but you ignored 💔
@realdanafields
@realdanafields Год назад
Awesome!!!! This looks great!!! What kind of glue did you use? It’s 11 months later, how’s it holding up?
@Adamjt10
@Adamjt10 Год назад
The quarter molding was PVC?
@reeflee623
@reeflee623 2 года назад
hey where did you get the molds? i want to do this exact thing to my room and was wondering where you got the two moldings
@VAcreeper
@VAcreeper Год назад
Fuck the molds.. Real question is, where’d he get them gloves! Am I right??!
@michaelwerbick
@michaelwerbick Год назад
@@VAcreeper Both at HD... lol but he probably spent more on the gloves than the chop saw... overkill on both for the project. lol
@BrucePhung
@BrucePhung 2 года назад
can you please clarify this for me as I can not see in closed up . Are you molding 2 piece together or 3 piece together. The video showing glued 2 piece together. But. the fishing look is much wider. what is going on? please explain because I want do the same as your to my living room. Thanks.
@kirupakaran127
@kirupakaran127 2 года назад
Great 👍
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! It was such a fun and cool project 👍🙌
@ridingdirty8897
@ridingdirty8897 2 года назад
Do you have a link to the light kit you used? Would very much Appreciate it. Love the video
@ExcessiveWisdom
@ExcessiveWisdom Год назад
i see two rows of led's but i only saw you lay the bottom layer, how did you stop the upper layer from shining directly at you? just another mould?
@Sfnickr9
@Sfnickr9 2 года назад
Awesome setup! You mentioned that you can cut these RGBIC lights without any issue. But you lose full control. What does that mean? Thanks
@JumpermanTech
@JumpermanTech 2 года назад
Thank you! You can program segments of these lights to whatever you want so the part you cut off, you can't program that portion because it's gone so you lose the FULL control. Thanks for watching!
@urface12343
@urface12343 Год назад
It’s not full control. These strips won’t know if there’s pieces missing so if you cut anything off, it’ll continue whatever program you have it on pretending that there’s still a full strip. So if you do a rainbow setting, there will be a delay from the start of the program until it reloops because the lights think the entire strip is there.
@VAcreeper
@VAcreeper Год назад
I’m hanging led lights today.. Wait! Where are my gloves?! I need my gloves!! I can’t be doin this shit without no fucking gloves!, “Happy Baby!! You seen my LED light hanging gloves anywhere?!”
@nicalove77
@nicalove77 2 года назад
Looks awesome 👏 you need a JOB I need a project at my house 🏡 🤣
@maxsteel08
@maxsteel08 10 месяцев назад
what are the 2 mouldings called?
@RimonMiajee
@RimonMiajee 4 месяца назад
Is that 34 ft??
@nenepes0s
@nenepes0s Год назад
I want to do something similar except with channels and not a mount. I want mine running vertically & horizontally with gel / waterproof power strip led light inserted into diffuser channels though there are little to no videos on gluing diffuser channels to walls & cutting them for corner shapes & connecting / T connectors. If you know any good videos to recommend please let me know as you see ny terminology is not all good which effects my ability to search videos effectively for this goal. Also I lease my living space, and was wondering if you knew any good glue/adhesive alternatives that aren’t permanent and are removable with little to no wall / paint damage.and would work best for gluing in shower
@michaelhughes3273
@michaelhughes3273 Год назад
Would be more amazing if it was sound activated as well.
@Drazirach89
@Drazirach89 2 года назад
Can this do a flickering fire effect?
@JumpermanTech
@JumpermanTech 2 года назад
What do you mean by fire? There's a good chance these lights can be modified the way you'd like them
@Patriots2004
@Patriots2004 Год назад
where are you guys located?
@tenzinwangden1724
@tenzinwangden1724 Год назад
I like the idea but I don’t see what you doing. I appreciate if you have a work light
@Infamousss93
@Infamousss93 2 года назад
Yo jumpman, you got the link to the molding? What store home depot or lowes? This was the easiest method I seen, ima copy it 😤
@JumpermanTech
@JumpermanTech 2 года назад
I don't have a link to the moulding but I showed which pieces I used. I went to the local home depot but I'm sure Lowes carries it too. It is a very common and cheap moulding compared to others. Thanks for watching!
@BashenManTV
@BashenManTV Год назад
You've used these a lot? Why didn't you know they can be strung into a single strip? They don't have to be split. It's in the instructions.
@jsully4074
@jsully4074 5 месяцев назад
Where is it in the instructions? Mine is on 2 separate power lines. No way to connect them together.
@luism2701
@luism2701 2 года назад
Downvoted because you gave zero info on the mouldings you used.
@JumpermanTech
@JumpermanTech 2 года назад
1:40 👀👀👀
@abdunnurnosib
@abdunnurnosib 2 месяца назад
So true
@angerissues69626
@angerissues69626 Год назад
On a similar project myself. So far idk if should have them facing upwards or downwards
@zz424
@zz424 Год назад
What tyoe of adhesive?
Далее
7 Common LED Strip FAILS and How To Avoid Them
12:14
НЕ БУДИТЕ КОТЯТ#cat
00:21
Просмотров 638 тыс.
LOLLIPOP-SCHUTZ-GADGET 🍭 DAS BRAUCHST DU!
00:28
homemade automotive 12 volt memory saver
4:02
Watch this before buying LEDs
19:47
Просмотров 2,5 млн
GOVEE M1 LED STRIP (BEST FOR 2024) 👑
14:04
Просмотров 282 тыс.
DIY LED COVING + PICTURE RAIL - On A Budget!
8:52
Просмотров 168 тыс.
BEST LED Strips | Govee RGBIC strips music synced!!
8:33
How to Add BEAUTIFUL Wall Lighting (SUPER EASY!!)
8:43
Crown Molding with Indirect Lighting Installation
6:18
НЕ БУДИТЕ КОТЯТ#cat
00:21
Просмотров 638 тыс.