How to Install Headwall Flashing | Shingle Roof Install Guide

Подписаться 9 тыс.

Просмотров 23 тыс.

50% 1

Headwall flashing is installed at roof to wall connections on a roof. This can be found at skylights, chimneys. In this video we’ll show you how to install the headwall flashing around a mock skylight.
0:00 Intro
0:09 explanation - where is headwall flashing installed
0:56 prepping the 110 metal flashing
2:11 installation
This video is from our latest series, “The Shingle Roof Install Guide,” where we will walk you through every step of the process when installing a brand new shingle roof. From the drip edge to ice and water shield, from starter strip to flashing, we will give you all the details on how to install a shingle roof.
Full playlist: • Shingle Roof Install G...
We are a licensed and insured roofing contractor based in Burbank, CA, so keep that in mind when you watch our videos, as roofing regulations are different across the country.
We service the Los Angeles area, and if you’re looking for a trusted roofer, be sure to contact us today for a free estimate!
Contact Us!
► Facebook: / roofrepairspecialist
► Instagram: / roofrepairspecialist
► Read our Google ratings: bit.ly/34bQrVP
► Read our Yelp ratings: bit.ly/3mZChzP
Musicbed SyncID: MB01DPKMFCT9MVJ

Хобби

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@RoofRepairSpecialist 2 года назад

Thanks for watching! Let me know if you have a different way of installing headwall flashing.

@k5blazerman956 Год назад

Thanks man it's been so long I forgot how to do it great video very professional looking work there.

@RoofRepairSpecialist Год назад

Glad I could help

@eduardozalazarfernandez1311 3 месяца назад

good job and thank you for your wisdom

@RoofRepairSpecialist 3 месяца назад

My pleasure!

@ironjohn5914 7 месяцев назад

A bunch of Tar works too~

@RoofRepairSpecialist 7 месяцев назад

@danr355 8 месяцев назад

Im using t 1-11 on a carport bumpout. So there is a low slope roof that meet a back wall. Should i put a osb panel on the back wall fist,flash it then cover with the t1 -11. Thanks.

@RoofRepairSpecialist 8 месяцев назад

Sorry, I’m having a hard time understanding the application/ detail

@fernandomingo2398 Год назад

Question; nailing the flashing on top of the shingles is not a waterproofing issue? Thanks

@RoofRepairSpecialist Год назад

It is, we just seal it with structural sealant. If it is a short run we try not to put any nails that are left exposed. On a long run such as this you need to put a few nails in.

@GrayBeard-ul9qj 5 месяцев назад

What seals the top of the curb to the sky light? I took a blower to blow off the tree needles from the roof top and needles were coming through this gap. Sky lights are a year old and have had lots of heavy wind and rain with no leaks.

@RoofRepairSpecialist 5 месяцев назад

Usually nothing, a waterproofing seal is not needed, if your worried about wind then a gasket will do

@hollywoodwear123 2 месяца назад

For the life of me I can’t find this type of flashing. Everything they sell is 90 degrees but I believe the roof to the head wall is a 45 degree angle. Is there an other name is it called beside head wall flashing or apron flashing? Thanks!

@RoofRepairSpecialist 2 месяца назад

Every region calls it something different, and every region has somewhat different flashings.

@berthull9333 9 месяцев назад

0:43 "Sidewall"

@RoofRepairSpecialist 9 месяцев назад

Hmm, that does sound like the correct term. Thanks!

@stumpynubs5387 11 месяцев назад

How far past the edge should the headwall flashing?

@RoofRepairSpecialist 11 месяцев назад

Not sure I understand, if you mean to the right and left side i would say 3-4”

@stumpynubs5387 11 месяцев назад

Yes, both sides. Thx@@RoofRepairSpecialist

@Aspenrayne Год назад

Do you put nails in the 4” section of the flashing. If so how often?

@RoofRepairSpecialist Год назад

We generally dont put nails in the exposed area of the 4" section unless its a long run. If its just a 2-3ft skylight it wont lift up. If it is a 10ft section under a wall we risk the flashing lifting up and we put nails to prevent that. I would say keep it at every 2-3ft on center. We try to minimize those nails as they will be left exposed.

@Aspenrayne Год назад

@@RoofRepairSpecialist the contractor that did my roof put nails approx every 1” on a 25’-30’ run. Excessive in my opinion.

@stumpynubs5387 Год назад

Should there be snow and ice material around the skylight before the shingles and flashing??

@RoofRepairSpecialist Год назад

Depends, if you have ice and snow where you live then yes. If the skylight manufacturer requires it then also yes. Velux does provide it and require it.

@stumpynubs5387 Год назад

@@RoofRepairSpecialist Yes, we do get a lot of snow some years. Thx I am trying to properly flash and shingle around my chimney that goes thru my garage roof and one side attaches to the gable end of my house.

@stumpynubs5387 Год назад

Do you have a video on flashing an inside corner?