How to Install High Altitude Main Jet in Firman Inverter Generator W01682. 

Glad you found it useful. Let me know how it goes.

@@JCTFIXIT Well. I finally did my two generaters after years of procrastination and when I felt I had recovered enough from my surgery I turned to your video and did the play by play. I have to say I sure wish I had a smooth experience like yours. The first one I had a bit of a challenge putting on the rubber air intake hose onto the filter box. I hope it's in good enough. Anyway, the second one earned me about forty minutes of swearing. The metal backing clip that the bolt that goes into the filter box was misaligned and I had to do a lot of wrangling in aligning the bolt so the nut on that clip would finally take the threads and I finally get the bolt to seat and drive it snug. Whew! The filter and the filter cover was a quick fix and, Voila! I'm still not a small engine mechanic. Lol. Once again, your instructions were spot on and I have have some experience now in doing this by myself. The real test comes when I buy prime gas and test for any leaks. Got my fingers crossed and wish me luck.

Good Job!

Thanks for watching! Glad I could help!

I would imagine that the jetting is not nearly as sensitive on propane as it is on gas

Thanks! After a couple years of usage I have to say it has been pretty much flawless for me. My only advice is to set it on a piece of wood or a tarp or something hard if you take it camping just because the air intake is on the bottom and you don't want to be sucking up straight dirt.

Please answer as soon as you see this. Can I clean the carburetor without removing it or would I still have to take the carburetor out in order to clean it? The manual doesnt talk about how to clean the carburetor for this model and there's no video on youtube that does either.

Pull the jets out and soak them in carb cleaner.

You should not need to pull the whole carb apart

Also, in your small engines, always run ethanol-free fuel. The ethanol is usually what causes problems. Most stations fuel has 10% ethanol. You don't want this.

@@JCTFIXIT Thank you so much! Also great to know about the ethanol free fuel especially 😊

Thanks! Once your generator is registered you can call in and ask for the kit and they will send it to you for free.

@@JCTFIXIT Ordered it this AM. Firman Shipped already - fedex air to Canada, I should have it Tuesday. I’m impressed. Good customer service 👍🏻

No. When you turn the fuel petcock to the off position, it blocks the flow of fuel from the tank. If you can turn the fuel peacock to the off position while running and let it run until it dies on its own and the carb would empty itself while running. But then you have to wait for it to cool down. 😎

I don't have it handy, but if you call firman, their customer support is pretty good. They should be able to tell you. Good luck.

This be the werst gramm-er I done seed.

@@JCTFIXIT Isa secondeded that