How to install LED Rear Turn Signals on a 2021+ Yamaha MT-07 by TST Industries

Подписаться 154 тыс.

Просмотров 6 тыс.

50% 1

Get our TST LED Rear Turn Signals here: bit.ly/40tHliC
Upgrade your Yamaha MT-07 signals with bright and stylish TST LED Rear Pod Turn Signal Kit. Select the best pod signal style that goes with your bike and receive the mounting brackets, hardware, and harness converters that enable a plug-and-play installation.
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Looking to upgrade your bike's looks while also improving visibility? Look no further! This kit includes everything you need to gain a sleek and incredibly bright turn signal, making you stand out while on the road. The included harness converters ensure that you get back to riding as fast as possible and aren't left behind in the garage working on a complicated wiring job. They provide a simple plug-and-play installation with no cutting, soldering, or splicing required! The included mounting hardware mounts directly to your license plate, providing a clean and low profile mounting location.
00:00 - Intro
00:21 - Tools Needed & Product Overview
05:43 - High Mount License Plate Light
07:23 - Low Mount License Plate Light
09:16 - How to Connect High Mount License Plate Light
14:10 - Low Mount Signals
14:37 - Install High Mount Signals
25:30 - Install OEM Signals
34:04 - Outro

Авто/Мото

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@Robocoppat 9 месяцев назад

I have a set of these pod turn signals on my 2021 Yamaha MT-07 and now that its all done and installed, the whole unit sits crooked( license plate mount and blinkers). Any idea or suggestions on how to even it out?

@TSTindustries 9 месяцев назад

Without seeing photos it's tough to tell how "crooked" it's sitting and possible solutions to fix it. If you contact our Customer Support Team they can try to help out.

@greasyzach 11 дней назад

with the oem signals, it would make a lot more sense to cut/route/re-solder/shrinkwrap the oem signal wires, rather than bore a big hole in the part that's meant to cover a bigger hole...

@ericrandall9349 Год назад

Would I need two Y connectors installed for double turn signals or just the one with the standard connection for the other side?

@TSTindustries Год назад

I'm not sure I fully understand your question. If you're wanting to run our Integrated Tail Light and external signals, you will only need 1 y-splitter as those are sold as a pair. As long as the signals you are intending to use have OEM connections, only ONE y-splitter is needed.

@marcobartoletta8449 Год назад

I have the same question as above… you showed connecting the 1 turn signal plug to the y splitter and then the integrated tail light plug to the other side of the Y splitter. Where does the other side then signal get plugged in? The left side turn signal was not connected to the y splitter so how would it blink in tandem?

@TSTindustries Год назад

@@marcobartoletta8449 each Y splitter takes care of one side signals. It is in the shape of a Y. The bottom of the y is one line that connects to bike harness. The top side of the y is two lines, with a signal lamp connected to each. One Y = one side. We sell Y splitter kits in pairs so one Y splitter purchase = two splitters, enough for left and right signals.

@marcobartoletta8449 Год назад

@@TSTindustries sorry I’m a bit confused… if the Y splitter allows for 2 connections (the brake light/integrated tail light and 1 turn signal), does the 2nd turn signal just connect where it typically would on its own as if they were not all getting synced up? Or does left and right each connect to the Y and the tail light connects in the traditional spot?

@TSTindustries Год назад

@@marcobartoletta8449 please watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tgqbBzYpVsA.html

@kevincoello4139 3 месяца назад

Can i use the same circuit as the license plate light to connect the rear running light?

@TSTindustries 3 месяца назад

Your question is broad and vague. Please give me a few more details about what you are connecting to get running light on. -BR

@kevincoello4139 3 месяца назад

@TSTindustries i bought the rear MECH-EVO Turn Signals Feature An 8mm Mounting Stud And Flat Mounting Surface, i wanna connect the running lights for those, but i don't know to get it connected using the Running Light Connection Kit.

@kevincoello4139 3 месяца назад

My bike is a 2023 yamaha mt07 btw

@TSTindustries 3 месяца назад

@@kevincoello4139 alright... Now i have enough info to answer in a precise way. One valid configuration is the tail running light circuit of your bike (blue wire in the bundle of three going to tail light). You can also connect to the license plate light positive like you said since the Mech-EVO running light circuit draws so little current . I hope this helps you finish it up. Cheers! -BR

@kevincoello4139 3 месяца назад

@TSTindustries i see, one more question. If i connect it to tail or license plate light, do i have to connect both ends of the running light connection kit to the same wire?