DIY installation video for the LED sequential turn signal and brake lights on the Yamaha MT-07 2018-2020 model. We used this kit: retrofitlab.com/products/led-...
In this video, we install the LED sequential turn signal lights on the rear section of the bike. We also have a video for the front.
Front installation video: • Yamaha MT-07 2018+ LED...
The colors and functions mentioned in 6:24 are not correct. For the sequential turn signal lights:
Black = Ground/negative
Red = Brake light function
Blue/yellow = Turn signal (color depends on the side, for example blue = right and yellow = left side).
The supplied adapter cable which connects to the original turn signal connector has 3 output wires, but only 2 are used (black/red) the other (green) one is not used.
- The black wire from the adapter cable needs to be connected with the black wire from the sequential turn signal lights.
- The red wire from the adapter cable needs to be connected to the blue or yellow wire from the sequential turn signal lights, for the turn signal function.
- The green wire from the adapter cable is not used.
The red wire from the sequential turn signal lights is for the brake light function. A new connection must be made from the original brake signal to the sequential turn signals using the supplied wire splicers.
Any questions? Contact us!
www.retrofitlab.com
Retrofitlab.com
Tolweg 2W
3851SK Ermelo
Netherlands
#MT-07 #yamaha #yamahamt07 #retrofit #retrofitheadlights #led #projectorheadlights #aharon #Retrofitlab #headlight #improvement #customheadlight #custom #lighting #light #diy #turnsignal
1 ноя 2022