How to Install MaxpeedingRods Coilovers, 2007-2008 Honda Fit GD

Подписаться 124 тыс.

Просмотров 13 тыс.

50% 1

#maxpeedingrods sent me a set of coilovers to install on my 2007 Honda Fit Sport (GD)
As always, I did not accept any payment from the manufacturer for this video, so expect an honest review. They do ride well for the cheap price (~$300) However, they were not a direct fit and did need to be slightly modified to fit my car.
I also replaced every suspension component, axles and wheel bearings, but those will be a separate vid, to keep this one short.
2007-08 Honda Fit Coilovers:
www.maxpeeding...
Coupon Code for additional 10% OFF: 6thGear
KYB Front Strut Mount Kit SM5654: amzn.to/45FITci
How to: Paint Calipers and Rotors to Prevent Rust • How to: Paint Calipers...
Tools used:
T40 Torx allen wrench amzn.to/3r2BS6z
12mm wrench amzn.to/489SMAE
17mm wrench amzn.to/3sSKGfB
19mm wrench amzn.to/3ZdHlUO
10mm socket
17mm socket
19mm socket
32mm socket amzn.to/3R7JfEm
extensions
breaker bar
small chisel
needle nose pliers
measuring tape or ruler
impact driver for rotor screws amzn.to/3Pb0CSb
5mm allen wrench/socket amzn.to/3LDBQt1
6mm allen wrench/socket amzn.to/3sJs2ae
Spring Compressor: amzn.to/3LccNwQ
round file amzn.to/3sJcfYS
hammer
PB Blaster amzn.to/3EsXHPM
I don't have Patreon or ask for donations, but you can support the channel with some rad 'Yota gear from my store: 6thgeargarage.c...
Instagram: 6th_gear
6thGearGarage

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@Drifter35417 Год назад

I don’t understand why you don’t have a bigger following. You are detailed in your instruction with a good quality to your video production. I am a retired Army Mechanic and if your videos were available back-in-the-day I would have made your channel mandatory watching! Keep up the outstanding work.

@6thGearGarage Год назад

Thanks, I'm happy to be working on my cars and helping others!

@NikosDIY Год назад

Top quality coilovers by maxpeeding rods... if you have a death wish... Super straight forward install... if you're willin' to chop half of the car...

@jasonlimah Месяц назад

it's crazy the amount of modifications needed to install a coilovers "supposedly" for the specific application! and it isn't even a JDM vs USDM problem, but then again, it is an affordable coilovers

@6thGearGarage Месяц назад

Yeah, you get what you pay for.

@evolightside89 9 месяцев назад

So I have purchased this an followed this to a T, dotted the i’s! I had the same issue with the strut mounts (drilling out the holes). Same with grinding out the rears so they fit. The rubber isolater for rear as well was an easy fix. Fits perfectly. The fronts on the other hand have proven to seriously PMO! I have the same clicking noice Both top mounting strut assembly where the mushroom washer rests inside on top of the shock, to protect the boot, has been pushed through to the top causing damage to the side wall. The clicking sound when settled mine did the same thing. I strongly suggest replacing all bolts washers and nuts for this whole job so future buyers don’t go through what i did. Main question, What are all the torque specs you used to tighten down the strut and to the strut tower when installed? They ride great just need a little more adjustment. Best of luck to anyone else getting these. Thank you for the video! 🙌🏼

@6thGearGarage 9 месяцев назад

I don't know the exact specs, I just tightened by feel similar to what I've done on other vehicles. One thing that quieted the clunking noise down a little was spraying the underside of the car with Fluid Film for winter. I coated the coilovers really well (because they were already starting to rust!) and the oil must have helped things move easier/more quietly.

@rafflesssadiss8182 Год назад

Sweet another Underrated youtuber. AutoSubscribe and tons of likes. Let’s Go. More videos please. 😊

@G-Fan4Life Год назад

I bought these for my 08 fit front one are great but the ones holy shit they hit so hard had to buy factory ones to go with the max springs in the rear

@6thGearGarage Год назад

I agree after a few days of driving around; these spring rates are too high for this little car.

@G-Fan4Life Год назад

@@6thGearGarage yea bro like 1 month later the max speeding rod shocks went out on me so I just ordered original shocks with the max speeding rod spring and it drives better going rev9 next year had them on my ep3 and there amazing

@keenbeans1133 3 месяца назад

where any of these issues with this kit fixed by maxspeedingrods or do they still need modification to fit on the fit?

@6thGearGarage 3 месяца назад

I haven’t tried to install any other sets, but I’ve seen other people mention needing to modify them to work as well.

@arayChichogha 9 месяцев назад

It seems interesting, how much does it cost and where to buy it

@6thGearGarage 9 месяцев назад

There is a link to the kit I used in the description. Thanks for watching!

@GalosPolElPaso Год назад

Excellent video im gonna install the coilovers in my 2007 Honda Fit this weekend ! Thanks! Robbie

@6thGearGarage Год назад

Hope your bolts/nuts are less rusty than mine 😂

@GalosPolElPaso Год назад

I hope so too 😂 my only concern it’s about the bolts ! I hope I don’t have to modify anything! I’ll keep u post ! Thanh’s again ! Greetings from California Robbie

@6thGearGarage Год назад

@@GalosPolElPaso How did it go??

@GalosPolElPaso Год назад

I’m just started today unfortunately need to stop to modify the holes !

@6thGearGarage Год назад

@@GalosPolElPaso I guess all their kits are like that for the Fit then...

@__akuuma 10 месяцев назад

wait what why do you have to remove the entire assembly

@6thGearGarage 10 месяцев назад

It has to come out to install the coilovers and also some parts need to be transferred over.

@jaeko2223 9 месяцев назад

he didnt have to, removing the two big bolt on shock and whole hub will swing out enough to remove shock. i believe he removed hub for easy access and because he replaced control arms.