How To Install Parking Radar Sensor System

Подписаться 218 тыс.

Просмотров 839 тыс.

50% 1

Purchase 4 Sensors Parking Radar System: choose the color for your car
US: amzn.to/2iMbyHf
CDN: amzn.to/2KWdkTo
Car Panel Removal Tools Kit 18pcs
US: amzn.to/2KO7688
CDN: amzn.to/2YLH3bz
Angled Push Pin Pliers
US: amzn.to/31ClCGT
CDN: amzn.to/2H8lKpN
DEWALT DWARA100 Right Angle Attachment
US: amzn.to/2Vmthpe
CDN: amzn.to/2nAvlPo
Angled Push Pin Pliers
US: amzn.to/31ClCGT
CDN: amzn.to/2H8lKpN
Professional Wire Stripper
US: amzn.to/2REssbn
CDN: amzn.to/2lRA1jr
Klein Tools Single Pull Wire Stripper
US: amzn.to/2Rw63ga
CDN: amzn.to/2nBl7OI
Channellock 909 Wire Crimping Tool
US: amzn.to/2xzGDFa
CDN: amzn.to/2m7qAfN
100-Piece Magnetic Screwdriver Set with Rack
US: amzn.to/2XBN19t
CDN: amzn.to/2m3qw0o
Wire T-Tap Connectors
US: amzn.to/2H6z3ai
CDN: amzn.to/31GdQvL
200 PCS Insulated Wire Butt Splice Terminals
US: amzn.to/2NZ3MdK
CDN: amzn.to/2mXHCgq
============
NOTE:
The sensor wire is 8' long (connecting to the controller box).
The display module wire is 16' long.
===========
Features:
Perfectly fit your car with universal hole saw
Beep sound warning will be more frequent when distance is getting closer
Multi Color to Select (Black/Red/Grey/White/Fiat Red/Champagne/Blue).
4 x Weather Proof Sensors + LED Distance Display.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
www.ptreon.com...
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 257

@andreamiller718 2 года назад

This was such a great instructional video! You did an absolute superb job explaining and showing everything clearly! Very much appreciated!!! Kudos to you!!

@markgump1547 6 лет назад

Had to stop watching because RU-vid has placed FULL COMMERCIALS about every 2 minutes in your video. Sorry! RU-vid will drive me to other sites soon unless this is reduced. (There seems to be even more commercials on your video than I've seen elsewhere on RU-vid...which already is too often.)

@dial2fast 6 лет назад

Mark, I appreciate you letting me know about this. The last I want to do is annoy my viewers. I went and checked the settings and I think it's fixed now, as there are only 3 ads. Again, I appreciate your comment and you have a great weekend.

@markgump1547 6 лет назад

Thanks! I have never posted videos so I just assumed RU-vid was in total control of this. I understand RU-vid needs to make money, but there is a limit to what people will put up with. I've see videos that had a 4 MINUTE commercial with NO SKIP option! Needless to say I left that video! Thanks again! You have a good weekend too! May your weekend projects go well! HAHA!

@BILBOBAGGIN5 5 лет назад

I use adblock so put as many ads as you want 🤗🤗

@x0x0xxooxoxx11 7 месяцев назад

@@markgump1547youtube doesn’t ad ads, the content creators choose where and when

@jmiah75 2 года назад

Only problem won't the numbers be upside down

@hazlbri 5 лет назад

I'm wondering if you put 2 sensors at the rear activated by the reverse, how could you activate 2 sensors installed on the front ?

@stephencutajar2548 5 лет назад

You can but then you would have to connect it to a power source where it is activated when the ignition is on like the cigarette lighter but then it will be ON constantly unless you use a seperate switch that you can switch on when you are parking.

@1618maher 3 года назад

Thinking to do the same… is it a good idea?

@fotomedia1 4 года назад

2002-2004 Honda Odyssey rear sensor Installation is a little more tricky but still similar to the one in this video. When drilling your holes for the sensors you'll need to avoid the inner reinforcement steel beam directly behind the plastic bumper. There's no need to remove the rear bumper completely but I highly recommend to at least peel back the plastic bumper by not removing the bottom underneath fasteners so you can see where the holes can be drilled, . The two center #2 & #3 sensors will end up being a little further apart than recommended about 27 inches apart . The two outer sensors #1 & #4 on both ends won't be a problem to clear of the inner steel enforcement. Also, the back-up light on the older Odyssey models is in the lift gate so it's going to require some extra wire fishing to get the wires to the inside of the Driver's quarter panel. Be expecting to take a good afternoon to complete the job.

@rafbay5015 4 года назад

Best DYS video ever, well done and totally straight through - 20/20

@tonynovosel3237 2 года назад

ill be doing this installation on the exact same vehicle tomorrow and before watching this video was not confident....however NOW! after watching your very detailed instructional video im full off confidence and would like to say....THANKYOU VERY MUCH FOR A VERY GOOD DISCRIPTIONAL VIDEO!!!!

@biribiri4400 4 года назад

Can't thank you enough for this! I just bought a 2000 Honda Accord with a dead reverse sensor. Planning to add an aftermarket reverse sensor and the one that you showed fit the bill!

@stevebutler7346 2 года назад

Great idea putting sensor at the rear so it can seen from rear view mirror ALSO Saves a lot of time and faffing about Tracing the cable to the front on the car Many Thanks Very Clear explanations Steve Butler UK

@duranguense9184 2 года назад

Yea but now is not abcd because went You turn is Goint to be dcba

@sercanerol509 4 года назад

Great work thanks for the sharing ☺👍my car censor all ready broken and not functioning anymore 😞I don't think so I'm brave and capable for fix that

@pickeyism 3 года назад

Thanks for sharing! Well said “the toughest part of installation is drilling holes to bumper”. 😂

@pliesplieso5014 2 года назад

Enjoyable if you are convenience with English language. Thanks.

@emmancabral4416 6 лет назад

hi, i have parking sensor installed in my car and i tap in the reverse light wire, now im planning to add backup camera and need power source also, can i tap it in the same reverse camera and merge with parking sensor ?

@dial2fast 6 лет назад

Yes you can tap an additional device to that wire

@DiogoFilipeR 6 месяцев назад

if you install it upside down isn't the direction wrong? or you can set it correctly after?

@chopp7664 Год назад

Good vid but I only want the sensor on when reversing only when I put in any other gear it shuts off

@GrumpyWolfTech 4 месяца назад

How is the sensor detecting you when walking up to it? I thought it was only powered on when the car is in reverse.

@dial2fast 4 месяца назад

The car was put in reverse gear.

@merchiousmpinganjira9983 2 года назад

My front sensor got damaged, honda freed blue. How can I have access to the new ones for me to replace the old ones? In my country they are not available. Please help.

@ego.trip. Год назад

Aliexpress

@ego.trip. Год назад

I cut these holes too big, since this saw was bad, now i have a litlle gap around sensor. With what I can fill it up? Black acryl silicon?

@dial2fast Год назад

Regular silicone or RTV silicone.

@HM-ke1qm 6 лет назад

TOO many commercials you tube

@chubbyBunny94 5 лет назад

get adblock

@ariss1 2 года назад

When it turns on it shows E-0. Anyone who know what does it mean?

@HalJordan18 8 месяцев назад

the display numbers look upside down, is it any way to flip them?

@dial2fast 8 месяцев назад

The display is designed to be place on the front dash. But I found it to be safer to place it on the back so when you are backing up, your head should be looking at the back. By placing the display on the back headliner, the digits will be upside down. When you are using the backup sensor, you are listening to the beeping and looking at the side LED bar (not really reading the numbers).

@mickmack6732 Месяц назад

Thanks for the great video. I actually installed the viewing module inside the driving side pillar directly behind the driver. As I play music and don't really need to see the screen, just hear the beeping. Cheers. 👍

@elyzensshuffledancemix2095 Год назад

I just bought an opel astra j sports tourer with the exact system installed, second hand car, the wiring seems legit, still no impute on the panel, maybe it got the source miss locked or maybe the on/off panel button(that's missing) it's locked on off position? Any ideea on how to eventually bypass the missing button and give activation imput to the panel?

@rodovikusa9348 4 года назад

thanks my brother very useful video, I will get for my car for sure, I will make a video too, installing it to motivate others and stop damaging cars around.

@zulfikranzulmos4066 6 лет назад

Is the monitor upside down? Was it meant to install on the dashboard?

@YourHomeTorontoRealEstate 3 года назад

This is really my favourite Channel! Thanks for your nice Videos, it is very enlightening, Waiting for your latest update. Dunlop Park

@Official__RILO 3 месяца назад

But what about the front sensors if youre connecting it to the reverse?

@dial2fast 3 месяца назад

They have specific kits made for front parking sensor and those need to be wired to the brake switch.

@abdihassanabdi2881 4 года назад

Well done 👍 and I have some questions did you choices the ABCD or Because I buy now with 8 Sensor and it doesn’t have ABCD should I choose the The ABCD

@dial2fast 4 года назад

Most of the kits are labeled already. If not, just plug it in one at a time and keep them in order.

@jotu173 11 месяцев назад

Incorrectly titled. SHOULD be called how to REPLACE BROKEN ...

@bigbogdangaming4843 3 месяца назад

Do you mean A left corner and B middle left? C right middle and D right corner ?

@bigbogdangaming4843 3 месяца назад

My car has the steering wheel on the right hand side

@weepingangel6805 Год назад

Thank you. I am installing 5% tints on my rear windows (old car) so I need sensors to reverse. Thank you.

@tomf8784 2 года назад

Can it be connected to the 12v socket or does it need to be connected to the battery via crocodile clips?

@dial2fast 2 года назад

Neither. As stated in the video, connect power to reverse light.

@yousufshaikhful 3 года назад

Does the sensor work all the time ? Or just when you put it in reverse gear ? In my country people get stuck in traffic a lot. I would be deaf from that noise if it kept beeping every time a bike or car came close enough to my sensor. So do please answer.

@dial2fast 3 года назад

This is a backup sensor. Hence only on when car in reverse.

@IXxK3v1NxXI 2 года назад

It is there anyway to lower down the volume? i have it and i think is very loud.

@dcamvideos6907 Год назад

Put cover the beeper hole with a Tape

@themikeymikechannel2947 6 лет назад

FUNNY COMMENT AT THE END OF IT. L.M.A.C.O. LOL All Voice, no beeping? Voice tells the driver how many feet, inches away that the vehicle is from your vehicle. Drivers side approaching vehicle / passenger side approaching vehicle with beep as the vehicle gets closer , 1 foot continuous beep. Sounds like a great idea huh?? Some dumb people drive without lights on at night , sad but true!! This isn't 2010 anymore, we want cool ways of knowing, vibration mini motors in the seats, one on one left cheek and the other one on the right cheek of our ass cheeks in case the radio is too loud you can feel the vehicle getting closer!! LOL

@animatedmovie7266 5 лет назад

Very well explained, thank you

@patricbrown8721 11 месяцев назад

Can these sensors be easily stolen by thieves?

@real.d3no682 2 года назад

How can my you tell the front versus the back ? If you want sensors in the front and the back ?

@HorusAlwaysLibra 2 года назад

Does this only work while parking, or is this constant?

@dial2fast 2 года назад

It works when the car is in reverse.

@pavittarsingh8140 2 года назад

You done very professionally work thank you your video Mack my work so easy for my sprinter van

@Freehalllito 3 года назад

Thank you for the video. You don't get that much information from the instructions manual.

@cuvame 4 года назад

Could I buy another 2 extra sensors and just tap them to 2 of the sensors that is connected to the module? I plan to put the extra 2 in the font bumper

@huntershortrepairs Год назад

You were not kidding when you said "inexpensive" lol, didn't expect less than $20! I'm thinking of getting this for my Jeep Wrangler, pretty sure my rear bumper is metal with just a plastic covering, how well does that little hole drill handle metal?

@dial2fast Год назад

Just spray some WD-40 or other spray lubricant as you drill, and the drill bit should last for the install.

@huntershortrepairs Год назад

@@dial2fast good to know, thanks!

@Yosefu93 3 года назад

mine doesnt have up indicators.. what does this mean even the instructions dont mention anything about them

@firstdown80 5 лет назад

Just bought one. Thanks for the video. Anyway to adjust the volume?

@dial2fast 5 лет назад

@kieranragan6641 4 года назад

Put some electrical tape over the speaker hole

@pkerry12 6 лет назад

why bother doing this? I just bought a new car with a reverse camera and radar and I never use it.

@K_N_44 3 года назад

Will be readable if you put the display screen upside down?🤔

@shirlyannrivera2860 5 лет назад

Hi i have a question

@Rabin19802 3 года назад

hey I installed it in my car you think we can change the sound of the sensor its really annoying

@sushh1 5 лет назад

You are very good at making instructional videos.

@Dc-gl7yn 3 года назад

Can you paint the sensors without damaging

@dial2fast 3 года назад

You can paint it but make sure it's not too thick with the paint.

@aryansanghvi579 4 года назад

Hey I got some, mine don't say ABCD so which one goes where?

@moralesnery 2 года назад

I used your video to successfully install a 4-sensor parking system in my old Corsa. I have one question: Can I connect the black wire from the power line (the ground) directly to the car's chasis without using the existing cables? Is there any risk of discharging the battery If I do this?

@dial2fast 2 года назад

Yes you can connect the ground wire to a chassis ground.

@MahmudulMithun 4 месяца назад

can you reduce the volume, it too loud for kids

@dial2fast 4 месяца назад

You can't change the volume.

@66e2aa2ca9 2 года назад

2:23 What's the name of the tool that brings the rotational power from the drill to the narrow space?

@drk8539 3 года назад

It’s gonna be annoying around maniacs who get to your car too close 😩

@AURELIANBXXX 3 года назад

And the sound is coming from the monitor??

@dial2fast 3 года назад

Yes

@selly1926 8 месяцев назад

Exelente muchas gracias por tu gran explicación.. gracias

@adityahpatel 5 лет назад

Hey, will it also work i.e. beep if lets say a person is standing talking on phone behind your car as you try to back up? In other words, does it detect only large stationary objects or people too? If latter, if that person starts walking sideways while you're backing up, does it still beep or does person have to be stationary in order for this thing to work? Thx

@dial2fast 5 лет назад

It detects any objects including people, wall, pole, kids, etc

@KENPOCHOPPER 2 года назад

Hi- i need to extend 2 bumper senors about 3 foot. What guage wire do you recommend? Ty

@dial2fast 2 года назад

Probably 20 gauge will work fine.

@Jubjubz-le6bg 3 месяца назад

Best DIY video on this subject man, made me confident enough to start my install👍🏼

@dial2fast 3 месяца назад

Great to hear!

@suhailjamil3909 4 года назад

Great job, but by mounting the led display upside down on the liner, doesn't that mean the distance display digits are shown upside down? It looked like that on the final test you did at end of video?

@dial2fast 4 года назад

In reality you don't need to look at the display when using it. Just listen to the beep and beeps faster as you get closer. In all the years I have used it, I never look at the display and just listen to the beep.

@dexter5715 2 года назад

how do you know where to make the holes?

@matermark 3 года назад

Thanks for the video. Didn't you mount the display upside-down? It has numbers to read the distance... I bought an 8-sensor kit on Amazon for under $30 I think, didn't install it yet...I may mount the display on top of the dash or on the sun visor edge where I can fold it down a couple inches to view it. It is for front & rear. I bought a GMC Envoy XUV, the model that the rear opens up like a Chevy Avalanche, and I'm stumped where to put the box and wiring---I can't think where to run the wires, I may need to run them under the vehicle because the cargo area gets hosed out and there's a divider wall with electric window behind the rear seats sealing the cargo area from the passenger area; it also folds down if I want to haul sheets of plywood. I also bought a dashcam that came with a rear camera and---same story---stuck on where to mount it and run the wiring. I can't do a license mount because the tailgate has an electric window and opens both down like a pickup and also hinges to open like old Ford station wagons...besides, my license plate mounting only has bottom holes. May need to mount next to hitch receiver... but maybe seeing I need to remove rear bumper, I can mount it centered in the bumper with the sensors while I have it off...Thanks again.

@iainhogg9830 3 года назад

Well done mate, great description

@escuamonify 2 года назад

Thanks for your explanation. One question. How do you read distance, if you mounted the monitor upside down on the inside roof?

@dial2fast 2 года назад

The practical way of using the system is listen to the beeps. Once the beeping gets really fast to almost constant, you know you need to stop. This is same way you use a factory backup system. Basically no need to read the little number.

@fotomedia1 4 года назад

How much clearance do you need behind the plastic bumper for the sensors? My rear bumper cover doesn't seem to have much room behind it to install the sensors because of the steel support so close. Is the kit drill bit strong enough to drill holes in the metal as well?

@akojamal1423 2 года назад

🌹♥️🌺👍👍

@akojamal1423 2 года назад

🌹♥️🌺👍👍

@socawarrior1263 3 года назад

good video, but the main point of these videos is locating and knowing how to tap the reverse light wire . It would have been nice to get a tutorial on that

@dial2fast 3 года назад

Sorry for skipping that but for any car, you have to start with the reverse light bulb and trace the wire back from the bulb and connect to the positive wire. That is the only way.

@PauonYT Год назад

Bro thanks for this tutorial! Masha Allah!

@jijeshkorothpoyil2697 4 года назад

Are these 4 sensors are two separate transmitter- receiver pair? One for left and one for right judgement? Or All are four separate combined tx+rx each? Regards

@dial2fast 4 года назад

Each sensor is a separate sensing unit. There really is no Tx/Rx as in data being sent. The sonar sensor probably changes resistance when objects get close to it.

@jijeshkorothpoyil2697 4 года назад

They are 40khz piezo electric elements. emitting short pulses of ultrasonics then capture echo. Then by doing math using microcontroller to estimate the distance to the reflection surface. As we know velocity of sound in air as around 340m/s There is an ultrasound transmission and reception.

@352lambo 6 лет назад

Very helpful video!! I think you should epoxy between the sensor and bumper just incase the sensor goes bad from water damage over time

@MrRangerZr1 6 лет назад

No it won't get damaged by water like that. Gluing it would mean you can never removing it. Say you bump into something or the sensor goes bad, you won't be able to replace the sensor.

@gaborlevenda2736 3 года назад

Hi it is a very helpful video but I have a little bit of concern about the product, especially the connection between the brain and the sensors. The sensors in the box have not been labelled or marked which one goes where to. Do you think it is going to be OK to use? or actually it does not matter how we set up the sensors and I can label it when the set up is done. Looking forward to your answer and God bless you

@dial2fast 3 года назад

You can label the sensors yourself before you install it. That way you know the order of the installed sensors.

@gaborlevenda2736 3 года назад

@@dial2fast thanks for the quick reply it is going to be very helpful for me have a good day sir

@mpcp27 4 года назад

Hey when you installed the new parking sensors, did you put a bead of enteringsilicone on the inside around the sensor to prevent water entering or it's not necessary?

@dial2fast 4 года назад

Not necessary. Behind the bumper is also exposed to the element and gets wet and dirt.

@vitoripca6181 7 месяцев назад

Thanks 👍

@kengtong2617 Год назад

Thank Q

@ASURAN24 3 года назад

Thanks for showing the green line. It helps with my reverse parking assist project with my Prius C!

@Younus.D. 5 лет назад

My parking sensor , when i change to reserve start to make noise immediately , whats the problem?

@dial2fast 5 лет назад

One or more sensors have failed. Replace the failed sensor or replace the system.

@alimjafari5624 4 месяца назад

Thanks

@catoercb 4 года назад

Thank you. I'm planning to install one this week. Unlike your bumper which the installation cables are securely placed inside bumper assembly. Mine seems exposed to the bottom. I think I should have the cables wraped with something. BTW where do you put the beeper? I found mine when I put on the test the sound is extremely loud and a bit annoying. Did you put additional cover on it?

@mambrake 4 года назад

What is the size of the Hole drill bit???

@dial2fast 4 года назад

22mm

@rommelyares5501 4 года назад

My question is.. when you try the sensor while you where getting near, is the gear were on reverse position? Because I think you connected the wires at the reverse wires of the lights before it will activate. Right?

@dial2fast 4 года назад

Yes, the parking sensor only turn on when car in reverse.

@rommelyares5501 4 года назад

@@dial2fast thank you. Highly appreciated 👍😊

@JavaManRules 6 лет назад

Very good video... Greetings from Auburn GA (Gwinnett County)

@dial2fast 6 лет назад

Thank you Tim. You have a wonderful holiday and stay warm in this cold and cloudy weather.

@javidbankotkar6725 4 года назад

Thanks for the informative video. Can I fix this on front bumper? Please advise

@javidbankotkar6725 3 года назад

@Rama Nrusimhadevara Thanks

@joseanderson-cuff6491 Год назад

Excellent video, well edited and informative.

@BORICUACHANNEL 3 года назад

Love it

@user-id1jd9uc4f 5 лет назад

Hi Thanks for the video, Would you please write me the measures on the Chrysler Voyager. Thanks again for your efforts

@xxrodneyxx 5 лет назад

What template or measuring specs did you use for the holes in the rear bumper? Thanks in advance..

@dial2fast 5 лет назад

On this Honda Odyssey, the inside of the bumper has markings stamped on it from the factory. I just used those locations. If you have a different vehicle, you can put painters tape on the outside of the bumper, then measure equal distance and height for each sensor (or match close to what location factory uses if it's an option).

@xxrodneyxx 5 лет назад

@@dial2fast Thanks for the reply. I have a 2010 EX-L res/nav. I'll be looking for the marks on the inside of bumper. Thanks again!

@joshrimando7872 3 года назад

can the beep sound hear outside even the door close?

@dial2fast 3 года назад

Depends how well insulated your car is. You might hear a faint sound, but it's definitely audible inside.

@vishaldubey5841 6 лет назад

How can your sensors detect you even when your car was not in reverse???? I think the sensor works only when the reverse gear is engaged?

@dial2fast 6 лет назад

Because the car was in reverse gear and holding the brake so I won't get run over.

@vishaldubey5841 6 лет назад

@@dial2fast hand brakes?

@mybestsmile19 6 лет назад

Can you do it for me Odyssey, is complicated 😳

@johnnyrichardson7137 6 лет назад

If I have the sensors color matched will they still work because the color of my vehicle is not an option?

@dial2fast 6 лет назад

These ones you get are also painted by the manufacturer. You can paint them yourself but don't put too thick of paint on them.

@johnnyrichardson7137 6 лет назад

Ok thanks

@mikesmith2794 6 лет назад

Just bought one of these kits, none of the sensors have the letters ABCD

@zulfikranzulmos4066 6 лет назад

This video so satisfying.. My reverse light not working and also reverse sensor.. It was due to a bad reverse switch..

@uniqueautomationelectronic5696 5 лет назад

Thanks pls show me brand & price?

@jlowe1463 6 лет назад

Very well made video, thank you for showing all the details. I'm fed up with videos made with one hand holding the camera while trying to do the work with the other. Questions: so the power is connected to backup light power source so when it is in reverse gear the sensor will function. What about the last part of the video? You approached the back of the vehicle and the alarm sounds. Was the engine on then? I'm assuming so cause when you're in a parking lot and trying to backup(even before gearing to reverse) you want to know if there are cars or people coming from the other direction. And you don't want the sensors on when the vehicle is quietly parked in your garage or a parking space.

@dial2fast 6 лет назад

That last part of the testing is with car running and gear in reverse. The backup sensors only come on when gear in reverse. It does not come on when you have it park or drive. This is same as how a factory system work.