How to Install PS5 030 Controller Clicky Hair Triggers Kit - eXtremeRate 

What a timing, ordered my kit 7 hours ago and the video was uploaded on the same day

Can you do a video showing the installation of the Hair triggers and Rise Remap together at the same time for the BDM-030 I’m confused ! Do I use all the parts from the Rise kit or just some of the parts of the Ride kit when installing it with the Hair triggers ?

would love these on my ps edge controller. hopefully the dude on ebay shows up doing this. i can't be stressed with it

Just installed these a couple days ago! Combined with the bdm030 rise kit, it’s working great! And easier that the previous kits

Nice Kit 👍 and great Video as always 😗 Still waiting for more Dualsense Edge stuff and hope to see something soon 🙏

thanks for the quick upload! So you only need to do the 4 corner pads when you install the Rise kit as well? And just to be clear, you don't need any of the two (EVA / PORON) foams when you install on on a fresh out of the box controller?

Little tip: don’t shave off too much on the triggers or else you’ll have to press too hard. I use a knife to cut it, try and keep it levelled with the trigger (use a file not a knife like me😅)

ExtremeRate just make controllers better !

I cant wait my order to arrive!

Does this kit work for the Ben-040 by chance? I’m assuming it’s the same, but wanted to double check

I miss the old digital triggers you did with the 3mm travel on the bdm 010/020, will these ever come back?

Any update on the clicky triggers for the duel sense edge controller!?!

hello, if I have already ordered a variant with r2 and l2, is it possible to cut the board in this variant or solder it with a soldering iron? Will everything else work then? Or will you have to order the version without r1/r2, l1/l2? Thx

YES!!! FREAKING FINALLY!!!!!!

29:27 im confused about the disclaimer on screen, i just installed the rise 4 remap kit on another controller, but it didnt tell me to change the sponge into a thick one. It is still the original. Now i want to order a remap kit, and trigger buttons for another controller and install them together, should i leave the original sponge then or not? And also, what is the purpose of those 4 square sponges on the corners of the motherboard?Thanks in advance

man, i wish you had a R1, R2, L1, L2 only hairy trigger kit. i dont think i need the clicky face button.

How come you didn’t connect the tape up ribbon cables?? But in the other part of the video they were connected?? So I’m confused do you connect them back or not

18:15 aren’t you supposed to plug these ribbon cables back in at the end before reassembling the controller? I’m about to install the clicky hair triggers together with the rise 4.0 remap kit.

great video but for some reason i cant get the metal rod out of the trigger. can someone help??

I just had my rise 2.0 and clicky kit arrive and opened it up to realise I have the bdm 30 it needs to cleary say just cos there's a A on the back of the controller doesn't mean it's a 20 cos mine has the A 😂

Great kit just got finished works good but I wish I went for the strong version… Lesson learned

I opted out of cutting the adaptive trigger cables and instead turned off the feature in the ps5 settings. My question is what actually happens if an update or something unexpectedly turns the adaptive trigger setting back on? Is that bad news?

Do you know why tigger works and the other doesn’t ? Like in the process of building it one works perfectly fine, and the other takes more force to push down to make it click and it goes down more

My R1 and L1 have zero throw, wont hear a click. Do i need to cut some of these aswell, wasnt clear in the vid. Thanks

i just bought this an put it together the other day everything works fine but my left bumper doesn’t work idk if something fixable or i gotta buy a new one

Can you combine this clicky kit and the LED face kit?

hello, i bought this kit and the rise 4.0 remap kit. How do I install them both at the same time?

Do I have to have the membrane flat on there? And how do I know if my membrane is broke? And if so how do I get a new one

Hy sorry but what is the difference between the strong version and the other pls I don’t really uderstand, for me is the felling of the touch is it right ?

hi, i have metal RISE4 Remap Kit for dualsense bdm 030 and the Clicky Hair Triggers Kit. To the buttons behind I assigned triangle, square, circle, x. They worked for 2 months and they still work, but suddenly they don't work anymore when I press them simultaneously with the L2 command. If I use, however, the standard controller buttons these work perfectly simultaneously with L2 . I already reset the controller and switched to wired connection, but that didn't fix the problem. I changed the sponge like in the video. I will soon receive another FPC cable that you have kindly sent me. I think the problem is the FPC cable contacts on the motherboard because when I go to reposition them temporarily the problem is solved for a few minutes/hours and then comes back. However I wanted to know what are the critical points in the installation of this cable: is it more important that it is positioned well on the motherboard or on the underlying cable? I also observed that it deforms easily during installation; could this be a problem too?

I have a problem after installing the clicky kit, the controller makes tackling sounds from the r2 and l2 area, I tried to turn off the adaptive triggers but it keeps doing it, any help?

I have a problem where my left trigger triggers twice in a row sometimes. Any ideas?

BDM 040 coming soon ?

Having a issue with My Rise remap kit and the Full Clicky Kit installation, My issue is that when i press my paddles specific for the one that is mapped to Jump (left paddle) It only works every now an then and i cannot use any other buttons like Moving forward in cod or anything i have to be standing still, Could it be because i haven't installed the Sponges on all for Corners ? @ExtremeRate

Guys but the rubber pad is only installed on the bottom buttons and nothing on the upper ones? Or it should be installed on all 4 buttons?

Can you use this with the rise 4 remap kit? I've already got the remap kit installed

Whats the difference between in the light or strong version

Hi, xan you use the trigger stoppers and the paddles at the same time

Does anyone know do the BDM 2.0 clicker triggers work on the BDM 3.0? Just accidentally bought a 2.0 back paddle kit and had a 2.0 clicker trigger spare, need to order again just wondering if anyone knows the answer to the above please 🤞🏼

Please can I buy this to install in my dualsense edge?

Is there a clicky L1/R1 option for the dual sens edge?

Why does there have to be different ps5 controllers I bought the wrong package

Can I get just the clicky triggers for my bdm-030? I don’t want all the other stuff

Hi there don’t know if ur going to read this but I wanted to know would this be able to work with the buttons in the back thanks for the video

Hi what if I plan on using the controller on PC, do I still cut the wires?

How about trigger stops?

Any chance this can be done with the new PlayStation Portal?

Wil this kit work with a charm Focus remap kit I already installed?? BDSM 030. I would like to upgrade the whole controller to click style

Only my L1,L2,R1,R2 triggers worked my other buttons didnt

AT LAST! :D

What if I want only clicky bumpers? Im saying can i have only l1 and r1 ?

If i buy the whole kit for both the face and bumpers. Will i be able to add extremerte custom color face buttons from the same brand ?

Bro a piece of my controller fell off and it don’t wanna go back on it had no glue or anything on it, it just fell off putt no where while I was applying now I don’t know what to do 🤦

Problems with right paddle Hi all guys I have had a ris4 remap kit for 3/4 months and since yesterday the right paddle has started to no longer work properly. for example if I take a character that can be crouched (I use O) and I press the key 10 times only 7 will work. it no longer responds correctly. I tried to take it apart yesterday and put it back together correctly. Has anyone encountered this same problem? i am really desperate😢😢

15.34 mine has a bracket right their and it doesnt fit becUse of it

CAN i do this on my edge controller ?

Every time I put the back shell my d-pad and buttons stop working do u know what I did wrong ?

When is the bdm-040 strong clicky kit dropping? They keep changing the controller now i can't even put a good trigger on this 040 damn i might just start reading books and going outside more fuck buying an overpriced edge just because they keep changing the design for no reason to discourage modders. Might be time to move on from gaming!

Just leave it to the professionals

Bonjour je ne comprends pas pourquoi les fiches bleu a 17min55 et 21min55 ne sont a aucun moment rebrancher sur la manette ? Merci

Where can i buy that actual microswitch button. Not the kit.

why are they out of stock on amazon i preordered them and they are still out of stock

My left triggers wont work

IS THERE ANY POSSIBILITY TO ONLY SELL THE TRIGGERS (R1 R2 L1 L2) ???? I DON'T WANT THE OTHER BUTTONS.

Yeah, there is 0% chance of me doing this. Do you sell pre made controllers?

Installed it and it works. However, the paddles don't work for a short time if I accidentally press L3 in Warzone while I'm running. This is often unavoidable in stressful situations and my jump doesn't work while I'm running because I accidentally press L3 while running. Does anyone have a solution for the problem?

Sadly this ain for the bdm 040

What if I bought the 010-020 kit and have a 030 controller ?

Can u still use the haptic feedback on the triggers

Would it work on bday 40

Does this work on bdm-040?

Doesnt work on 040?

8:34 I don’t have that piece

I got a Bdm-40

Can I still use bdm-30 mod

What about the textured grip

Ich baue dir gerade wieder um auf normal nach längerer Zeit reagieren die nicht immer richtig ich werde sie mir nie wieder kaufen!

Anyone know how not do this in the chino area?

What are the differences between the triggers (light and strong) ???

This sucks, same tips to identify this as a BD-020 so I bought the entire wrong kit, what the heck guys.

Cat get the trigger bottons back in

First

The trigger control fdc doesn’t fit in my trigger button. It’s a Bdm-30 but the trigger button is shaped differently

Just leave it to the professionals