How To Install PSP Glass Lens Upgrade

Подписаться 7 тыс.

Просмотров 7 тыс.

50% 1

Ahh yes, finally we get to install the glass lens, its like the Ying Yang of PSP display upgrades, at least if you got an IPS. Installation process can range from super easy or near impossible, depending on what faceplate you are using. I show you all the different scenarios + do a stress test at the end.
------------
The Glass Lens - All Models
------------
Amazon US: amzn.to/3JFTNWt
International: s.click.aliexpress.com/e/_DB1...
------------
Time Codes:
------------
00:00 - Introduction
00:46 - Tools Required
01:16 - Which Model Is Compatible?
02:22 - OG Removal - Original Shell 3000
03:19 - OG Removal - Original Shell 2000
04:28 - OG Removal - Original Shell E1000
05:08 - Non-OG Shell Compatibility Overview 1K/2K/3K
08:52 - Non-OG Removal - RED 1000
09:48 - Non-OG Removal - Glossy Smoked 1000
11:23 - Non-OG Removal - SkyBlue 3000
12:37 - Non-OG Removal - Matt Smokey 1000
14:15 - Surface Prep / Possible Sanding
15:40 - Best Gluing Method
16:45 - Glue Clean Up
17:59 - Clean Up / Prep For Reassembly
19:10 - Hammer Time
20:45 - Conclusion / Gameplay / Matt IPS vs Glossy IPS
------------
The Tools
------------
Flush Cutters:
Amazon US: amzn.to/443AijL
Amazon CA: amzn.to/4aN8J0m
International: s.click.aliexpress.com/e/_Dlu...
PryTool:
Amazon US: amzn.to/4aCS6ER
Amazon CA: amzn.to/3xOdPuQ
International: s.click.aliexpress.com/e/_DFn...
B-7000 Glue:
Amazon US: amzn.to/49FMQzd
Amazon CA: amzn.to/3U8KGT0
International: s.click.aliexpress.com/e/_DD0...
------------
Mentioned Videos
------------
PSP 1000 Disassembly: • How To Properly Disass...
Monster Hunter Replica Shell: • Monster Hunter PSP She...
------------
Discord: discordapp.com/invite/5bsGzq7
------------
Please note: The shopping links above may contain affiliate links. If you make a purchase through them, I may receive a small commission, which helps support the channel. Thank you!

Игры

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@TotalKommando Месяц назад

Extra Notes: - A sharp box cutter would come in handy to cleanup/trim the corners if the screen isnt fitting - Using heat is useless, the plastics are melted together using a bonding agent (they dont use glue) - Excess heat could warp the faceplate we dont want that. - I found another 1000 Clear faceplate laying around and that one happened to crack open cleanly - Yes thats Minecraft glass in the thumbnail Discord: discordapp.com/invite/5bsGzq7 Incase You Missed The IPS Video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PHX2FJ8b4LY.html

@deamooz9810 Месяц назад

wow, the hammering test was impressive, I didn't expect it to be so durable

@paprika3881 Месяц назад

Keep in mind that he was bashing it while the front shell was free to flex and absorb the shock The moment he flipped it and the glass was making contact with a hard surface, it broke at the first hit I think you should expect it to behave similarly to that second example while mounted on a psp that's properly closed up

@TotalKommando Месяц назад

In that instance if it was fully installed, the LCD would probably shatter first before the outer glass does.

@ShadeamusPrime Месяц назад

Who else saw minecraft glass?

@extremecaliber2662 Месяц назад

Thanks for delivering!

@TotalKommando Месяц назад

Thanks for interacting : )

@Savoke Месяц назад

Crazy that I just got my replacement a couple days ago and see this in my recommended lol

@stevexanny Месяц назад

Been waiting for this one and you delivered! I think I'll end up doing the project smokey faceplate (if I can find it), glass lens upgrade, IPS screen and PSVita joystick. Maybe even throw in a new battery. I was gonna repaint the grey frame and triggers but seems like too much work to disassemble the PSP for just an aesthetic upgrade, maybe I'll leave that for the future. Thanks again for this video series! BTW I swear to god I had a dream last night where I was given a PSVita but it looked like a fischer price toy, had a flip out screen and was big and bulky painted red and yellow. I remember thinking in my dream "wow my PSP 1000 is so much nicer than this" LOL

@TotalKommando Месяц назад

LOL

@GreenLeefMusic Месяц назад

This is awesome. I have a blue PSP-2001 that has a bad screen glass on it (with a heavy scratch in one spot and micro scratches) so I have been looking to do something like this for awhile.

@abonnessansvideo-hg9tk Месяц назад

Support again for psp content ❤

@TotalKommando Месяц назад

Merci : )

@mmedel89 8 дней назад

Just did one with the gloss atomic blue shell for the 1000... not my first time and patience is required. Looks immaculate! Took about 3 hrs. 😅 You get out of it what you put in, I think.

@Abdxllah7 Месяц назад

16 seconds ago is crazy

@shinjalimoel689 Месяц назад

Man, your videos are so awesome. Just bought myself a second PSP1000 from used market and will try to update it with an IPS Screen and a new shell! (Not sure if I’m bold enough to try for this glass mod)

@TotalKommando Месяц назад

For begginers who dont want to get too deep into it I would only recommend it on Matt finish clear PSP 1000 faceplates, but then they already come with a quality lens

@jraphaa Месяц назад

The video is very good, I have this mod on my 3000, and without a doubt it is very good, now I am preparing my 1000 to do this mod along with the IPS screen and PS Vita joystick.

@aurelios69 Месяц назад

Will you be able to do this on the psp 1000? The faceplate and screen window are the same part

@jraphaa Месяц назад

@@aurelios69 You can do it, but not in the original shell, if it's a shell bought on Aliexpress for example, the lens is a separate piece from the shell, you can remove it and put this glass one in, but the original one can't, because it's a single piece. with the shell. Obs: Agora que vi que tu é BR kkkk abaixo em PT Da pra fazer, mas não na carcaça original, se for uma carcaça comprada no Aliexpress por exemplo, a lente é uma peça separada da carcaça , ai da para remover e colocar essa de vidro, mas a original não da, porque é uma peça unica com a carcaça.

@Sash0l Месяц назад

The modding community for the PSP is so nice, i wish there were more mods for the 3DS!

@TotalKommando Месяц назад

Perhaps once im done with the PSP i may

@D4GUNI4 Месяц назад

i've recently upgraded the battery on my old psp to a lipo 4000mah , the original battery was close to 20 years old😂 I want to keep the outside looking as original as possible, but watching this series has made me want to pull the trigger on a eBay psp to make it the ultimate modded psp. Great production man, thanks for your insights 🫡🫡

@TotalKommando Месяц назад

I have been wanting to do this for 15 years, Im finally doing it, trying to go through all the possible PSP mods xD

@Lipe_PS Месяц назад

cool bro, a tip is to paint the sides of the screen protection, on the transparent casings, where the glue marks appear 👍🏼 👏🏼

@TotalKommando Месяц назад

True, that's also an option

@WarmGlassOfBatteryAcid Месяц назад

Hey thank you so much for this, I have a clear shell and want to mod it with glass and an IPS screen Im going to do it but be very patient

@simplyalif Месяц назад

This vid gave me anxiety 😅😂😭, the mod looks fun.... However it looks difficult to do..... Maybe the manufacturer can make a faceplate without the stock lens?

@cy4n_knight_q8 Месяц назад

Would be nice to have so.e tutorials for the psvita. Mine is a mess and needs fixing up internals parts as well

@TotalKommando Месяц назад

I plan to get into Vita stuff once Im done with my big list of PSP mods lol What issues does yours have?

@narrowneptune5479 Месяц назад

nice

@EneRec 9 дней назад

I bought a second handed 3000 model as a kid and the shell wasn't the official one, it got super disgusting without me even dropping it. Paint chips, scratches everywhere... I replaced the whole shell and in the process I bought this crystal replacement as a "crystal screen protector". I completely forgot about it, I've been playing on that psp nonstop to the point of literally ignoring that crystal protector. Now this video appears on my FYP actually showing me how wrong I was about it being a screen protector HAHAHHAHA

@TotalKommando 9 дней назад

lol

@TopTen-ub2ok 14 часов назад

Bro Where get psp street e1000 ' s lens Glass.. please help me.!

@Fernando-lu4zc Месяц назад

What’s the best way to clean up glue off the glass from the front ? 😅

@TotalKommando Месяц назад

Isopropyl & A disposable Microfiber or good quality tissue, you can even just rub it away with your fingers when its dry : )

@TopTen-ub2ok 14 часов назад

Bro. I have a PSP Street E1000 . I need it's glass, can you tell me from where you bought this..? or can you send me link to buy this one.!

@matthewtully1745 12 дней назад

Which 1000 metallic blue faceplate would you recommend to match the factory color?

@TotalKommando 12 дней назад

As far as what I know, they are all mostly the same, as in coming from the same aftermarket factory, so whichever one you find is your best option whether it fits the color exactly or not, even if it doesn't it will be alright as it will give a 2 tone look of some sort, and of course quality will be low, and if you have original buttons it would be best to use as always.

@vitaaa Месяц назад

Lets say I didn't want to replace the official shell for my PSP-1000, could i still replace the lens? Maybe by carving it out or how do you think I should go about that?

@TotalKommando Месяц назад

I would not recommend going down that path, it will never look perfect unless you got some serious CnC tools lol But I would love to see the result if you do end up doing it

@zazzcode369 Месяц назад

Ive no got the two new shells for my PSP 1000 and PSP 3000. The Lens on the 1000 shell was nearly impossible to get off i f up and ordered a new faceplate by now. The 3000 lens was very easy and ive got the glass lens now. But i still have some issues with the shell on the 3000 on the top usb section its not closed properly there is like a gap. And the Square button always gets stuck i pressed a few times because the Hole on the shell is too big is there a fix?

@TotalKommando Месяц назад

If you have discord, you can share some pics and I can guide you

@zazzcode369 Месяц назад

@@TotalKommandomy comment always gets deleted.. name on that is zazzcode

@toat_ Месяц назад

YO where should I get PSP shells from? Specifically the 3000 ones, apparently Amazon is an insanely bad choice

@TotalKommando Месяц назад

I bought around 20 shells to talk about it in a future video, and all I can say is that the quality is hit or miss depending on what color / finish you get. I get mine all from AliExpress, if you want tell me what color you are looking for, and I can send you a link to one I purchased from if it matches the desctiption.

@zazzcode369 Месяц назад

@@TotalKommandoCan you link me a White and a Clear Dark Blue one for the PSP 1000 model? I need a good one but im not sure which one to buy off from aliexpress. It should be shipped to Germany.

@TotalKommando Месяц назад

@@zazzcode369 I got a the clear blue one from here: s.click.aliexpress.com/e/_DETFf4H its similar quality to the project smokey matt black psp. As for the white one, I think the only ones out there are very low quality.

@zazzcode369 Месяц назад

@@TotalKommando I wanted a White one with Black Buttons so badly... Okay then i will Stick with the Blue one i guess thank you.

@TotalKommando Месяц назад

@@zazzcode369 You could just get a white faceplate, if you really want full good quality body, then you need to find a decent condition OG white PSP then add black buttons and a new faceplate.

@aliz33 Месяц назад

Why u dont try to heat the plate/glue?

@TotalKommando Месяц назад

Great question, Reason is the glue they use, isnt really glue, its a plastic bonding agent, that melts the plastics together into one compontent forming a super strong bond. Too much heat could possibly warp the faceplate making it not sit properly. Heat would help but only a little bit, not enough to have a clean easy removal for the super hard ones :/

@aliz33 Месяц назад

@@TotalKommando iv got smth like 7psp's and 4 glass screens to assamble, i will check that. Still, if heat this plastic screen (a bit) from inside, should be easier in my opinion. Anyway, good vidss. I'm still wating on vid with battery content, becouse i do the same :D So, iv got M7 battery charger (i made my own charging cabels), FNB58 and many (around 20, and duble in transit from Aliex..) fake and orginal batteries. Cheers!

@PhoticSneezeOne 25 дней назад

Put playback speed to 0.75x Thank me later

@TYPICALGHOSTSNIPER Месяц назад

Or you could of just done it easy way used heat gun that would of made it lot easier to pop screens out.

@TotalKommando Месяц назад

That adds a high risk of warping the faceplate, I tried it with a hairdryer and it didnt make that much of a difference unless I really cook it. They use a bonding agent that melts the plastics together.

@briankeenan1456 Месяц назад

Why are you not using heat. I would use a small amount of heat like a hair dryer to soften the glue then use your method. But I’m no expert so I guess you already tried that.

@TotalKommando Месяц назад

They didnt use glue, instead some type of bonding agent that melts the plastics together forming a solid bond. I tried hot hair dryer heat and it did not budge with some of the clear shells. If I were to use a heatgun it would eventually warp the faceplate so that wasnt an option. It may help slightly with some of the other easier ones thats for sure.