Тёмный

How to Install Replace Front Brake Pads Rotors 2005 Chevy Silverado 2500 HD Diesel 

1A Auto: Repair Tips & Secrets Only Mechanics Know
Подписаться 2,5 млн
Просмотров 69 тыс.
50% 1

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 2005 Chevy Silverado 2500 HD.
This process should be similar on the following vehicles:
2001 Chevrolet Silverado 2500 HD
2002 Chevrolet Silverado 2500 HD
2003 Chevrolet Silverado 2500 HD
2004 Chevrolet Silverado 2500 HD
2005 Chevrolet Silverado 2500 HD
2006 Chevrolet Silverado 2500 HD
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ogy/1AX...
• 18mm Socket 1aau.to/ocE/1AX...
• 22mm Socket 1aau.to/oT/1AXA...
• 1/2 Inch Breaker Bar 1aau.to/oab/1AX...
• Ratchet 1aau.to/ogZ/1AX...
• Socket Extensions 1aau.to/ogm/1AX...
• Torque Wrench 1aau.to/odT/1AX...
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oaw/1AX...
• Floor Jack 1aau.to/obW/1AX...
• Jack Stands 1aau.to/obJ/1AX...
• Large C-Clamp
• Wire Brush 1aau.to/oad/1AX...
Subscribe: / @1aauto
Check out our playlist:
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/ko/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

 

15 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@1AAuto
@1AAuto 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@thecarlonian
@thecarlonian Месяц назад
It would have good to know that there are two pads with two wear indicator tabs and two pads with one indicator tab. I completely installed the driver side and then realllized i use the two with two wear indicators on the driver side. Will this affect braking performance?
@phillipreausaw1774
@phillipreausaw1774 2 года назад
Great video
@matthewjsprague1696
@matthewjsprague1696 Год назад
your back feeding g the abs manual. that will take out the abs manual. open the bleader let the old brake fluid out
@kevinw9625
@kevinw9625 3 года назад
The brake pads are identical, how did you know which one was for the inside and outside?
@rocketappliance9727
@rocketappliance9727 5 лет назад
Great video as usual!! Thanks again I was after the torque specs and again....you didn’t disappoint 👍🏼
@adreadinhell
@adreadinhell 4 года назад
should you replace those clips on the caliper mount?
@ericbraunberger849
@ericbraunberger849 4 года назад
Is this the same for an 07?
@1AAuto
@1AAuto 4 года назад
+Eric Braunberger This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
@jasonzee4561
@jasonzee4561 4 года назад
You slid that pad in there like nothing I had to beat it in!
@Robiko9
@Robiko9 4 года назад
Didn’t bleed breaks?
@travismahoney93
@travismahoney93 5 лет назад
Followed your instructions but I blew a rear brake line! You should put a note in there to remove the reservoir cap so the system doesn't pressurize.
@RealHank1791
@RealHank1791 3 года назад
No, he should compress the caliper pistons while still attached with the bleeder valve open. Reversing the fluid flow is bad for the ABS system. This way there is no back pressure at all. Only cost you a bottle of DOT3 fluid and will remove any air in the caliper as a bonus. Remember to only have the bleeder open while you have pressure on the piston.
@1AAuto
@1AAuto 3 года назад
+Hank Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@diegoanguisaca397
@diegoanguisaca397 4 года назад
Does it have to be calipers grease or it can just be any grease used for lubrications
@1AAuto
@1AAuto 4 года назад
+diego anguisaca Caliper or break grease would be best to use for this. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@patrickomann3580
@patrickomann3580 3 года назад
Wish I knew a 21 mm was needed before I started this shit
@bobdickens4980
@bobdickens4980 6 лет назад
What about a 2wd 1500
@rocketappliance9727
@rocketappliance9727 5 лет назад
What about it?... idiots of you tube...😡
@rocketappliance9727
@rocketappliance9727 5 лет назад
What about it?... idiots of you tube...😡
@wesbryant
@wesbryant 5 лет назад
I love RU-vid
@darthv8or
@darthv8or 6 лет назад
🤔.....use bolts of the appropriate size ta remove the rotor....👍🏻
Далее
2002 Chevy 2500 HD Silverado Rear Brake Pads & Rotors
14:01
Собираю Маню к осени ✨
00:48
Просмотров 626 тыс.
Hooper's CRAZY 55 MPH Backwards Driving Stunt!
3:20
Просмотров 14 тыс.
How to Bleed your Brakes by Yourself
8:45
Просмотров 7 млн
Собираю Маню к осени ✨
00:48
Просмотров 626 тыс.