How to install TST LED Turn Signals to a 2019+ Honda CB650R by TST Industries

Подписаться 155 тыс.

Просмотров 26 тыс.

50% 1

Upgrade your 2019+ Honda CB650R front turn signals to bright LED indicators from TST Industries. Choose between the sleek and low-profile BL6 design, the neo-retro inspired ECHO design, or our signature Mech-GTR design.
Get BL6 or ECHO Signals here: bit.ly/350Xpii
Get Mech-GTR Signals here: bit.ly/3bfOvP8
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Upgrade your 2019+ Honda CB650R front turn signals with bright LED pod signals from TST Industries. Our turn signal options fit within the empty signal bracket left behind by removing the OEM turn signals. The included wire harness converters ensure a plug and play installation while the mount adapters provide a stealthy and secure mounting area for the BL6 or ECHO. With three turn signal designs available, you can choose the signal design that fits your style and improves the look and safety of your Honda CB650R.

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@HassanAnge 4 года назад

Bought this exact same bike this week and I’m super exited ;) Thanks for the review, already thinking to modify my turn signal :) Also, it would be nice if you gugs can do a review on bar end mirrors that doesn’t require the inner part of the handle bar to be removed for this bike as this is for sure something I’m looking to buy, thanks ;)

@TSTindustries 4 года назад

I believe that the anchors for bar ends will rotate so mounting mirrors to those will not be very practical.

@jckcc 20 дней назад

I have a rather complicated question. My 2024 CB650R has turn signals with running lights, but only has 2 wires instead of 3. I read that the housing is grounded so they don't need the negative wire and both are actually positive; one for the DRL and the other for the actual flasher. It doesn't seem possible considering the whole housing is rubber. The other possibility is the DRL being integrated into the turn signal's circuit board itself, but I find it a bit hard that it can work with 2 wires where the positive doesn't send until the flasher is turned on.

@TSTindustries 20 дней назад

That sounds like you have an aftermarket set of signals. OE configuration on Hondas is green/orange/orange-white on one side, and green/blue/blue-white on the other. Green is ground, the solid color is the signal lead differrentiated by color per side, and theones with white stripes are the running light. If you see a wire combo different than that then the signals are not OE. It is possible that these were configured with our Running Mate product (or similar). That technology enables a single circuit signal lamp to have running and signal function. You can see that product here for reference: tstindustries.com/tst-turn-signal-running-mate-circuit-connection-kit.html

@jimmyl1606 2 года назад

Will this work for the 2018+ cb1000r?

@chuck1622 2 года назад

I have a 2020 cbr650r. Since the 2 pin LED flasher relay gen 2 doesn’t have the 3rd pin for ground, will the running mate still allow for front running lights along with the flasher relay? Is the relay even needed since oem flashers are already LED? Will oem flashers still have running light function if installing the 2pin relay only? In case reinstalling oem in future.

@TSTindustries 2 года назад

Boy...that is a bunch of loaded questions. I think your best bet is to contact our support staff through our website and go one by one with them. The running mate will work properly in all the scenarios you described but I am not sure off hand about all the other combinations you mentioned. Your front OEM signals will retain running light function even with our relay. The running light circuit is completely separate from the signaling circuit

@ropeysubstance1719 4 года назад

Is it possible to have running light + turn signal on the rear of these Honda motorcycles just like how they're designed for the front? Do you sell products that would allow that via plug and play?

@soldiers303 3 года назад

It's not possible on back as the plugs only have 2 pins. You can only do that by wiring 3Rd pin on indicator to another power source. I did this before and it works fine, but takes a while.

@NLLUD Год назад

Please do a video fitting the mech GTR indicators to the indicators on a cb1000r 2022 👍

@TSTindustries Год назад

If we get that bike in, we can try that but it's not on our queue right now.

@NLLUD Год назад

@@TSTindustries that would be great, I think it would be very popular and may be the same as the CB650 but not sure 👍

@douglasurquiza7574 11 месяцев назад

Precisamos de produtos de excelência assim no Brasil.

@TSTindustries 11 месяцев назад

Sorry, we stopped sending parts to Brazil because the vast majority was getting lost in transit.

@nesto0923 4 года назад

awesome bike beautiful and attractive..

@TSTindustries 4 года назад

Thank you

@nesto0923 4 года назад

@@TSTindustries fhanks God Bless

@duaner9392 7 месяцев назад

The 2021 cb1000r front turn signals have a 2 pin connector that I cannot find a harness for!

@TSTindustries 7 месяцев назад

Hmmmm...could you send some good photos of those to our customer service team and instruct them to forward to Bart? I would like to see if I can help with those and also add a harness to our product lineup. Thanks. -BR

@duaner9392 7 месяцев назад

@@TSTindustries Ive reached out. I hope something comes of it!

@TSTindustries 7 месяцев назад

@@duaner9392 i received your photos. Back in 2022 I surveyed a Rebel 300 with the same connectors. That was the first and only time i saw these new ones. I have reached out to some partner companies that supply our connectors to see if we can track them down.

@duaner9392 7 месяцев назад

@@TSTindustries thank you for the effort! Just gotta get a product out.

@tainomoto 3 года назад

Are you making a integrated tail light for the cb650r. Was hoping to get one. I just bought a 2021 cb650r a day ago.

@TSTindustries 3 года назад

At this time, that project has been put on hold.

@tainomoto 3 года назад

@@TSTindustries ok thanks I definitely want to get one

@tainomoto 3 года назад

@@TSTindustries do you still plan on making it?

@TSTindustries 3 года назад

@@tainomoto at this point we have learned that the 650 parts are in low demand compared to some other bikes we are working with and we re-assigned our resources to design for those other bikes. I can't comment on whether or not we will be restarting any 650 projects.

@tainomoto 3 года назад

@@TSTindustries ok thanks I'll keep checking

@garyyoung393 Год назад

So they have led resistors on the front ,?

@TSTindustries Год назад

I don't understand your question. The OE signals pull a lot more current than the aftermarket ones. That cause the OE signal relay to get symptomatic (either hyperflash or no flash depending on your setup). So you can either wire in load resistors to pull more current with the new signals, or replace your OE flasher relay to one that handles this type of setup. We do have a flasher relay for this bike and also have the video showing how to install it.

@garyyoung7187 Год назад

@@TSTindustries thanks question answered it's just to costly to ship to uk. front wire kit that includes the 2 adaptor wires and the cap end that keep it tidy and led flasher relay thanks

@TSTindustries Год назад

@@garyyoung7187 See if Cregtech carries the products you are interested in. They are a UK dealer of ours so you won't have to endure high shipping costs.

@NLLUD Год назад

Hi TST, will this work in my 2022 CB1000r?

@TSTindustries Год назад

We have not had that bike in the shop for any fit tests yet so i cannot confirm that.

@NLLUD Год назад

@@TSTindustries ok thank you, the indicators look very much the same as the CB650 but will wait out. Thanks again