No video :(

How-to: Installing ACS Composite C7 Corvette Side Rockers for the C7 Z06, Grand Sport, and Stingray

Подписаться 5 тыс.

Просмотров 14 тыс.

50% 1

Everything you need to know about our side rockers from how they differ from the other Corvette side skirts on the market, to the market and process they are made from, and finally, how they are installed on your 2014+ Chevrolet Corvette.
Our ACS Composite C7 Side Rockers are compatible with Z06s (PN 45-4-029), Grand Sports (PN 45-4-029), and Stingrays (PN 45-4-015), and come available in a Primer or Carbon Flash Black finish.
They are designed using OEM data and built to the Corvette specification for a precise fit and finish.
SELECT YOUR CAR:
Z06: acscomposite.com/products/acs...
Grand Sport: acscomposite.com/products/acs...
Stingray: acscomposite.com/products/che...
TIMESTAMP:
0:00 How they are made
0:45 Undercarriage protection feature
1:05 Hardware used
2:40 Competitor products
9:30 Installation overview
12:00 How rivets work
12:25 Cleaning surface
12:56 10mm Adjustment screw
13:55 Removing 7mm OEM hardware
14:20 Test fit with A-clamps
15:45 Loosely re-install the OEM hardware
17:22 Drill with a 3/16" drill bit
18:11 Installing 3/16" rivets
19:11 Installing small rivets
22:00 Competitor vs ACS fitment
SPLITTER RIVET REMOVAL: • How to Remove Rivets |...
FOLLOW US:
www.acscomposite.com
acscomposite
acscomposite

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@ACSCOMPOSITE 4 года назад

0:34 How they are made 0:45 Undercarriage protection feature 1:05 Hardware used 2:40 Competitor products 9:30 Installation overview 12:00 How rivets work 12:25 Cleaning surface 12:56 10mm Adjustment screw 13:55 Removing 7mm OEM hardware 14:20 Test fit with A-clamps 15:45 Loosely re-install the OEM hardware 17:22 Drill with a 3/16" drill bit 18:11 Installing 3/16" rivets 19:11 Installing small rivets 22:00 Competitor vs ACS fitment

@marksheklian8226 Месяц назад

Thanks for the great tutorial. I installed my side skirts this past weekend. Half way through I went to Harbor Freight and bought a cheap pneumatic rivet gun. World of difference lol. This was way easier than I thought it would be. I admit I bought cheap EBay skirts first but never even tried to install. Ordered yours and they are so much better. The pre drilled holes make it so easy. I was by myself. Used clamps for driver side but just the 7mm screws to line up passenger side. Worked perfectly. Love the look. Thanks!

@rsnate2930 3 года назад

I called Joseph about 10 minutes before labor day weekend to ask questions.... I am a pretty big enthusiast, but don't know jack about this type of stuff. Picked up my first Corvette, and was trying to soak as much information as I could! Thanks for setting me straight Joseph. I'm glad we could do business! Guys, you must trust this process, you will not be let down. Order from ACS!!! - Nate from Missouri :D

@ACSCOMPOSITE 3 года назад

Thanks Nate!!

@rickjones2985 3 года назад

These are the best products on the market period !!! I’ve installed them on my Corvette , perfect fit , and finish , very happy !

@driften1967 3 года назад

Finally a corvette Chanel where the work is done thoroughly and correctly. Love to see people take pride, and give attention to detail when doing work. So many bad videos out there, with bad instruction and misinformation. Where are you guys located? Do you perform work on corvettes for clients? Just bought a zo6 2016 with 1100 miles on it 😬

@ACSCOMPOSITE 3 года назад

Thanks! Means a lot to us :) we are located in Quebec, Canada and we do work on customer corvettes that come and see us!

@driften1967 3 года назад

@@ACSCOMPOSITE oh wow you guys are a little ways from me. I’m located in North Carolina. I’m always on the look out for great shops though. I just subscribed, look forward to checking out more of your content. Keep up the great job up there in Canada!

@buddybrown7848 3 года назад

was hoping to get my side rockers and front splitter put on there.

@nowheretosit 10 месяцев назад

I'm not sold on the rivets. Normally when you drill out a rivet the mushroom section stays in the frame rail cavity forever rattling around. I'd be a lot happier if the rivet element created a female thread so we can remove and reinstall the rocker in the future without leaving metal rattling around in the frame. But I loved all the technical product discussion Joseph provided.

@ACSCOMPOSITE 10 месяцев назад

Valid concern. However, you can peel down the backside of the OEM panel and get compressed air and blow out the shavings. Also, there is a steel wool at the end of the rocker. The shavings will get caught in there and preventing rattling and you can remote it to clean it up. We do it all the time. A rivnut could work (insert female thread). Might not have the clearance for that though.

@ImportDomestic2006 3 года назад

Do you guys stamp your ACS composite Products to ensure genuine ACS composite products?

@ACSCOMPOSITE 3 года назад

Yes, all new products have some form of stamping on it

@mousse8868 2 года назад

I want to buy this. Dose it fits on my 2015 Corvette C7 Z51 3L? Please advise. Thanks.

@ACSCOMPOSITE 2 года назад

Yes they will

@mousse8868 2 года назад

@@ACSCOMPOSITE But I live in San Francisco, CA, USA. If they are not fit my car, Can I return them to you? Please confirm. Appreciated.

@ACSCOMPOSITE 2 года назад

@@mousse8868 yes of course :)

@ChadWoodNC-PiedmontSkyCams 3 года назад

Any dealers and installers around Charlotte, NC?

@ACSCOMPOSITE 3 года назад

None in Charlotte :(

@ChadWoodNC-PiedmontSkyCams 3 года назад

@@ACSCOMPOSITE Any in North Carolina at all?

@ACSCOMPOSITE 3 года назад

Unfortunately no :( however most, if not all, body shops would be able to handle this install!

@buddybrown7848 3 года назад

Why is the passage side rocker different from the driver side rocker.

@ACSCOMPOSITE 3 года назад

What do you mean?

@buddybrown7848 3 года назад

@@ACSCOMPOSITE in the video the two sides dont look the same.

@buddybrown7848 3 года назад

will ACS be at Corvettes in carlise for 2021. if so I will get side rockers installed there.

@ACSCOMPOSITE 3 года назад

Hi Buddy, we are continually monitoring the US-Canada border situation and current travel restrictions. At this time, it is not looking like we will be able to attend.

@jameshawkins7948 3 года назад

And if they ever come off you have holes in the side of your car. That’s what is making me reconsider.

@ACSCOMPOSITE 3 года назад

Hi James, yes holes will be present if removed! We have found most Corvette owners and future owners are in search of side rockers for theirs as the advantages outweigh the disadvantage of having drill holes. Also, these are the same holes you would find in any Corvette off the dealer lot with the GM packages on them. Thanks for your comment :)