Тёмный
No video :(

How to Jack up your Can Am Spyder F3. A short video talking about how I jack up my Spyder F3. 

MOABMAN
Подписаться 3,7 тыс.
Просмотров 995
50% 1

In this "Learning the Basics" Video, I show you what I use to jack up my Spyder F3 when working underneath.
Disclaimer:
My videos are for entertainment purposes only and not meant to be used as a guide for repair or servicing your Spyder. Any and all repairs should be done by a service/maintenance technician. If you work on your own vehicle and use my videos as a reference, you are doing so at your own risk. Please consult a trained Can-Am service person before working on your vehicle.
• Videos and pictures were taken, edited, and created by me using various cameras including Go Pro's along with Vegas Pro 16 and Music Maker Suite and also Kaiber.ai software
• All music and soundpools used are Licensed: Commercial (Royalty Free) and purchased from www.producerplanet.com
• Licensing information can be found at: www.producerpl...
- Music for you to purchase or use has been created soley by me using instruments and AKAI Professional MPKmini software and looper and are the creation by me only.
Copyright © 2022 - Current - MOABMAN. All rights reserved.
No part of this video may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written permission of the copyright holder. Any copy, no matter the length, will result in a request to remove video containing said copy and may result in a channel strike from RU-vid.
You can contact me at:
moab.man@yahoo.com

Опубликовано:

 

5 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@PurpleOnThree
@PurpleOnThree Месяц назад
Really like that ATV jack stand!
@PurpleOnThree
@PurpleOnThree Месяц назад
I like those ramps even better than the ATV jack stand!
@MOABMAN
@MOABMAN Месяц назад
Me too!
@n6dl321
@n6dl321 Месяц назад
I like it.. after trying all those techniques. I settled for backing upon the ramps. I have a largish U shape between the front and rear ramp. 2 24inx12 in shelf boards behind each front ramp, a 1x4 spanning the space between the rear tails of the shelf stock. the rear ramp front (ramp) edge nested against the 1x4. this tends to lock the 3 ramps together so the rear wheel spin will not shoot the rear ramp under the frame. that's a bit messy. In this application we have to be backing as there is no room under the frame for the center ramp., And yes that lightweight rear wants to spin great video for the masses.
@MOABMAN
@MOABMAN Месяц назад
@n6dl321 Thank you for watching and awesome comment!! I would love to have the type of stand the dealers have, but the pockets are a little "shallow" nowadays! I was grateful for the ATV jack when the wife bought it for me as a gift one Xmas. It was a huge difference and help from the floor jack I always had.
@thegrumpyolgringo
@thegrumpyolgringo Месяц назад
Great intro. Great tips. Those ATV Jacks seems to be the only way to Jack up The SpYder. I think the stands are non negotiable. I like the ramps fix. Good Stuff. 👍. NicelY Done. Thanks for sharing. StaY Alert. rYde Safe, in a Fun WaY. Keep on SpYdering. 🕷️🕸️😎🇺🇸.
@MOABMAN
@MOABMAN Месяц назад
Thank you for that! With the ATV jack, having two spots to lift with make all the difference in the world.
@PurpleOnThree
@PurpleOnThree Месяц назад
Absolutely love the beginning of this!
@MOABMAN
@MOABMAN Месяц назад
@@PurpleOnThree thank you! You can tell I'm watching too many nature shows nowadays!😃
@PurpleOnThree
@PurpleOnThree Месяц назад
@@MOABMAN 🤣🤣🤣🤣🤣🤣
@TADSkewd
@TADSkewd 19 дней назад
That’s the same Pittsburg jack I was thinking of getting. Wasn’t sure if it was good enough for the f3s but now I do, thanks!
@MOABMAN
@MOABMAN 19 дней назад
I like it a lot, just be sure that it meets your weight requirements. One model did not and I think it was one without the metal wheels. Also the release lever is a little tricky so watch the fingers!!!!! Glad the video helped some.
@kdub607
@kdub607 Месяц назад
Good info, I didn't know or think about an ATV jack - pretty cool!
@MOABMAN
@MOABMAN Месяц назад
@kdub607 the tricky part of the ATV lift is finding one that has the ability to lift the Spyder weight wise. Most of the "motorcycle" lifts have too small of a weight limit.
@PurpleOnThree
@PurpleOnThree Месяц назад
Great idea with the rubber mat
@MOABMAN
@MOABMAN Месяц назад
I tried several things and that just seemed to work the best for me. They were just thin enough.
@PurpleOnThree
@PurpleOnThree Месяц назад
@@MOABMAN sounds perfect!
@ThomasNappo
@ThomasNappo Месяц назад
Great job...well done
@MOABMAN
@MOABMAN Месяц назад
Thank you for that! I had a little struggle trying to make something so basic, entertaining.
@MichaelBrown-np1kc
@MichaelBrown-np1kc Месяц назад
Awesome Video Outstanding 2 Thumbs up!!!!
@MOABMAN
@MOABMAN Месяц назад
@MichaelBrown-np1kc Thank you so much! I worked hard on this one to make something boring seem interesting, so I appreciate that!
@PSPTommyG
@PSPTommyG Месяц назад
Weebles Wobble but Spyders dont fall down!! Great new camera view on round parts!
@MOABMAN
@MOABMAN Месяц назад
@PSPTommyG thank you for noticing the camera work. It wasn't easy strapping a go pro to an ant but it worked out!
@PSPTommyG
@PSPTommyG Месяц назад
@@MOABMAN
@PurpleOnThree
@PurpleOnThree Месяц назад
Very good info...thank you!
@guitarzan0515
@guitarzan0515 Месяц назад
Many Thanks Mr. M !!💪😘
@MOABMAN
@MOABMAN Месяц назад
@guitarzan0515 thank you for watching. I have been so busy with life I haven't had much time to check on your videos. I am hoping to catch up on some soon!
@guitarzan0515
@guitarzan0515 Месяц назад
@@MOABMAN no worries, I’m not that exciting anyhoo😆
@MOABMAN
@MOABMAN Месяц назад
@guitarzan0515 I beg to differ! We are who we are and I enjoy your videos very much!!! You don't juggle or dance, but you have fun jammin!!!!! And for that alone you are a joy to watch!
@rafasales2254
@rafasales2254 Месяц назад
Very good info great video
@MOABMAN
@MOABMAN Месяц назад
@@rafasales2254 thank you! A gift from an awesome person helped with the camera angles!
@TADSkewd
@TADSkewd 19 дней назад
Hahahha awesome into!
@MOABMAN
@MOABMAN 19 дней назад
Thank you! I had fun making it!
@garyoconnor8247
@garyoconnor8247 Месяц назад
Which ramps did you purchase. Look nice and wide!
@MOABMAN
@MOABMAN Месяц назад
@garyoconnor8247 I am super happy with them and if you purchase hope they work well for you also. Here is the Amazon link and let me know if you have problems looking it up. RhinoGear 11909RCMI 4 Piece RhinoRamp Vehicle Ramp Pair (12,000lb. GVW Capacity) and Wheel Chock Pair Bundle a.co/d/0EooPus
Далее
Can you use a Car tire or not on a Can-Am Spyder
8:16
MILLION JAMOASI 2024 4K
2:17:51
Просмотров 12 млн
Почему-то хочется плакать
00:17
Просмотров 519 тыс.
We Rebuilt the Chopper and Met State Troopers!
56:52
Просмотров 1,6 млн
Let's Compare the Can-am Spyder RT vs F3
21:41
Просмотров 66 тыс.
Lifting a Can Am Spyder RTS
9:17
Просмотров 37 тыс.
meine modifizierte Can-Am Spyder F3-S
14:01
Просмотров 5 тыс.
How to change oil and filter in a Can Am F3 Spyder
23:28
This Just In: We Have A Can-Am Spyder F3-S To Test!
8:34