How to find out and check the battery charging spool and the kiprok are still good or damaged.
The first step is to check the path from the charging spool, namely the white wire, the red line, make sure there is current and for the size, 12.5 to 15 ac volts. And the motor must be turned on.
then for the kiprok path is:
1. Red line white wire above right make sure there is current.
2. the red cable under the right make sure there is a current. Because it goes to the battery plus.
3. the black and white line cable is the time for kiprok to make sure it is attached to the frame or motor body in its position on the left.
4. the yellow wire and the white line is the light path. The one from the spool and goes directly to the on-off switch if there is an on-off switch. if there isn't, it means that it's close to the remote switch.
Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
Please #SUBSCRIBE AND LIKE#
#SIDIK NURYADEN CHANNEL#
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
26 авг 2024