No video :(

How To Laser A Custom Door Mat // Lightburn and CO2 Laser Tutorial

Подписаться 47 тыс.

Просмотров 37 тыс.

50% 1

Ever wanted a fancy custom door mat on your own front door or for a gift?! We'll, it's easy with a co2 laser! Just a few minutes of programming and one mat and you have a priceless gift that you cannot buy!
In this video, I'll walk you through how to set up the laser engraver, prep and finish the mat, and program lighburn as the software.
Visit my blog post for the lightburn sample file, cut library, and font download for free!
www.myerswoods...
TOOLS / MATERIALS
■ PLUS Haven Pure Coco Coir Doormat : amzn.to/2KPwsqb
■ Orion Motor Tech 60w Chinese Laser Cutter Engraver : amzn.to/31K0TEc
OR
omtechlaser.com?sca_ref=2167960.0NUx7jOeeC use code "MYERSWOODSHOP" for 5% off!
■ Spar Urethane : amzn.to/2LfhlXe
■ 30mA Voltmeter Gauge : amzn.to/2YMFpFL
■ 6 Inch 390 CFM Inline Duct Fan : amzn.to/2Td9daK
■ Ruida RD644S Controller : bit.ly/ruidardc...
■ S&A Genuine CW-5200DH (5200DG upgraded) Industrial Water Chiller 6L Capacity Cooling Water for 80W-150W CO2 Engraving Cutting Machine : amzn.to/2MJUse0
■ Spar Urethane : amzn.to/3aUSAKp
■ Lightburn Camera Mount : www.etsy.com/l...
Become a Patreon Member!
/ myerswoodshop
FILMING GEAR
■ Sony Alpha a6600 (main camera) : amzn.to/2y51iEv
■ Wireless Microphone Comica CVM-WM100 : amzn.to/2XiF8JG
■ GoPro MAX - Waterproof 360 : amzn.to/2URKb1W
■ Neewer 62"/158cm Camera Tripod : amzn.to/2COtEQo
■ Neewer 31.5"/80cm Camera Track Dolly Slider Rail System : amzn.to/2BTKJv7
■ Neewer Lights : amzn.to/39Vy4W6
Find Me On The Internet:
■ Website : www.myerswoods...
■ Instagram : / myerswoodshop
■ Facebook : / myerswoodshop
■ Etsy : www.etsy.com/s...
■ Pinterest : / myerswoodshop
■ Twitter : / benjmyers1
■ Blog : www.myerswoods...
■ Amazon Shop : www.amazon.com...
■ Podcast : www.thebuildgu...

Опубликовано:

30 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@MyersWoodshop 3 года назад

■ PLUS Haven Pure Coco Coir Doormat : amzn.to/2KPwsqb ■ Orion Motor Tech 60w Chinese Laser Cutter Engraver : amzn.to/31K0TEc Or cheaper on ebay (not as good for returns though) ebay.to/2DkaQic OR omtechlaser.com/?ref=myerswoo... use code "MYERSWOODSHOP" for 5% off!

@jgw6878 3 года назад

What degree camera did you got? I've ordered the same laser from OMTech. I looked on Lightburn's website and they have 5 different degree options. Thanks!

@MikeTindell 3 года назад

The link to amazon goes to a product that is unavailable.

@williambailey7042 3 года назад

@@jgw6878 I have the very same yellow 60watt laser with the 500mmx700mm bed and installed the 140° camera from lightburn.

@jgw6878 3 года назад

@@williambailey7042 Thanks!

@flamingomtn 6 месяцев назад

You probably know this by now but the magnetic tool holders from Harbor Freight are an awesome tool, especially on a steel honeycomb bed. They're heavy AND magnets...doesn't get better than that. :-) Thanks for this video.

@ronaldlight7578 7 месяцев назад

Very helpful!

@jeffwalston8110 Год назад

Very good tutorial! Have you ever needed to wet the matt before lasering?

@cliffart7398 3 года назад

I have learned a ton about lightburn from this video alone. Great job sir! I tried to do a doormat using vcarve with the jtech laser on my shapeoko and it was burning into the mat. I have lightburn but haven't spent a lot of time learning it. Now I am convinced I need a pure laser, like OMtech.

@JasonPeltier 2 года назад

Thanks for the video, Ben! I just tagged you on IG with my doormat. Also, i found that using offset fill instead of just fill as well as flood fill was the quickest.

@MyersWoodshop 2 года назад

Awesome! Thank you!

@sharon93petra 3 года назад

Hi! How did you clean the doormat after engraving?

@joshuas5504 2 года назад

Hey when you do the vertical and horizontal align in 2 separate steps, that crosshairs next to those buttons does both at the same time.

@1010tesla 3 года назад

Lightburn just added a new fill option called "Offset Fill" it's in the same drop down for the layer. I am curious if it lowers the cut time.

@MattWeber 3 года назад

It can but it also seems to have many issues itself depending on the use. All about experimenting with your use case.

@garywinter2737 3 года назад

Appreciate the insight, once the Onefinity is up and running the laser is next.

@automaticprojects 3 года назад

Great video!

@narvin2012 2 года назад

Hello, thanks for sharing your very interesting video, I have an 80W Laser cut, using it with lighburn in addition to the first activation on Mac pro it asks me for another activation to be able to work, did it happen to you? Thank you soon.

@taishahornig2502 3 года назад

So I’ve also seen folks are spraying down the mat with water and dawn dish soap to keep from getting flames... thoughts?

@MyersWoodshop 3 года назад

oh, that may help for sure!

@pezz86 3 года назад

Nice video!! Can i know how many psi/bar u use with the air assist? tank you!

@varxtiscreations5008 2 года назад

I figure that due to the burning process, this technique will only work with lighter colored mats.... but doesn't hurt to ask: Can this be done on a darker or even black colored mat?

@automaticprojects 3 года назад

Hey Ben - Long time fan of your channel and projects. I finally tried this today but unfortunately the mat caught fire on my second letter and I had to abort it. It burned a few inches of the mat completely away as the hairs burned down to the rubber base. The first letter looked fine and the second one is the same size (under 3" tall) and not overlapping, so I'm not sure why that one caught fire except maybe heat build up or a dryer spot on the mat. I have the same laser (OmTech 60W about a month old) and bought the same mat from your Amazon link and used your library file for speed and settings (300mm/47.5%). I still have the stock built-in small air pump which I think is about 10 psi. It has worked fine on a couple small wood projects but maybe I need to hook up my air compressor with 20-30 psi before trying this? The stock vacuum fan is also pretty worthless and the cabinet quickly filled with smoke, so I know I should also replace that with an 6" AC inline fan outside the machine. Any ideas you have are greatly appreciated. Please keep up the great videos.

@snommas 2 года назад

Did you figure out the burning issue? I have the same problem, same machine. Did higher PSI work better? Thanks

@automaticprojects 2 года назад

@@snommas Yes. I got rid of the noisy little built-in air compressor and attached the one in my shop, and now I regulate the air pressure between 5-30 psi depending on what I'm etching, cutting, burning, etc. It makes a big difference to be able to adjust the air flow in real time, even with things that can't catch fire like etching glasses, I'll turn up the air to prevent the glass from overheating and cracking.

@mogenshansen2018 2 года назад

Hallo Your videos is very cool. I wil ask about the coat you spray on the mat, what is it and where can i buy it. Best regards Mogens from Denmark

@Jonnay0808 2 года назад

The coupon code doesn't seem to be working. Are there special instructions?

@mattguzman73 3 года назад

Can u use the onefinity with the laser to do the same thing?

@pintailryan7414 2 года назад

What camera are you using (for lightburn)

@natesimpkins4875 3 года назад

how can i import settings into lightburn? When I click the link it brings me to a text document but I'm unsure what to do after that.

@trevorallison2108 3 года назад

The reason that the mat looks so good, is that the person who designed the font did such a great job! I would like to see a response from Mr Myers as to why he thinks that using fonts, clearly labelled in his video as 'personal use only', on a saleable product is acceptable behaviour. If you're making money from using somebody else's design, surely it's only common decency to seek a commercial license.

@stevenmarston8923 2 года назад

I never got the impression that Mr. Myers was selling these mats. I clearly heard him state they could be gifts for friends and family. Yes, he stated they could be sold but you're making a vast assumption that he's never paid for the usage of the font. More specifically this particular font "Winter Creative" does NOT have a commercial license on the Dafont website. It does however give the end user the ability to "Donate" to the creator via PayPal but no price is stated, i.e., give as you deem fit. Now having said all this, I absolutely agree with paying for licenses where asked to do so. It's an "Honor" thing and we should do the honorable thing. There are some very talented people out there that should be getting paid for their talent. FWIW, I pay for all my commercial licenses or make donations. Why? Because it's the right thing to do.

@fredwienbarg5051 2 года назад

I tried to duplicate it using the same settings on my 60w but it caught it on fire. Would a stronger air supply prevent that?

@MyersWoodshop 2 года назад

less air, less lines per inch

@johnjansen509 3 года назад

doesnt the stuf burn quickly?

@jp450r 3 года назад

how do i get the library?

@dasfreakster 3 года назад

Hey brother! Looking for a source for the laser head. I have the same unit as you and mine is bad. Not having luck finding a replacement one. :(

@MyersWoodshop 3 года назад

Have you tried contacting omtech?

@DailyDoseOfShortClips 2 года назад

love the video, only thing please consider changing your microphone setttings/placement

@MyersWoodshop 2 года назад

Yep, didn't realize it until after. Got a mic since then.

@briangermain8403 3 года назад

what is a common selling price for a custom matt?

@MyersWoodshop 3 года назад

40-50$

@bradleysanker5625 3 года назад

Can this be done with a Jtech Laser? I know it is not as powerful but not ready to drop that much on a CO2.

@MyersWoodshop 3 года назад

I THINK So. @furniturebypete is trying it out so check out his socials.

@bradleysanker5625 3 года назад

Going to give it a try on my channel. Have one on order and IKEA near by.

@williambailey7042 3 года назад

I purchased 3 mats and the Helmsman Spar from you link. I have the same yellow 60 watt. I'm doing something wrong, can't seem to load your files in my laser Library.

@MyersWoodshop 3 года назад

which file and how are you doing it?

@williambailey7042 3 года назад

The lightburn_cut_libraries_60w.clb file. I right click and save as. Then when I'm on lightburn I click load. But file doesn't show up. It keep putting some other file extension at the end of the .clb after I save as. I'll try again later this week. Thanks for the reply.