How to link Siemens S7-1200 with ifm Starter kit IO-Link master 

Incredible... easy explained, this is the most clearly video about IO-Link configuration and programming that I've ever seen!, if link the program in tia portal is 100%, but not problem,... now is the 99%

I love the way how you simplify things great videos😀

Thank you so much Rajvir for your effort and knowledge you are giving

thanks a lot Rajvir Singh , Saludos from Mexico

Excellent presentation , Thanks!

great video, very clear , hope you do more videos about tia and / or ifm

Hi Sir, What version od tia13 do you have in your PC? I have a problem when i try to install them. GSD file cuold work but with some limitations.

AWESOME TUTORIAL!

Hi if i have 3 sensors ifm, and i want stored the data in a Pc. I need a Master, a cable M12-usb and the related software. is it correcect? thanks

Great tutorial! Congrats!

Hi, how do you change the IP address of the io link master?

Hi, great video. Thx. When I have a s7 1212 and tia v12 and have a problem when I want to connect my al1102 to the cpu in the network window. When I right click on the al both entries a grey and I can’t chose the plc_1 as cpu for the master like in 5:13. Can you show or explain your ip config? Both are in the same subnet in my system. When I translate it says that the connection port from the cpu and the io link master are different

great job , but i have many questions , how can i meet you please?

Well explained. Nice job bro......keep going..

How do you get the tags in the Watch_table? I understand you need to define them but how and to access them via the I/O-adress?

thank you sir ..

Hi Rajvir, I have benefited greatly from your videos. I just have one request, could you make the background music volume lower. Its sometimes hard to follow what you are saying. Thanks a lot for your great effort !

Do u defined the adress Iw 70 ? And how? Thanks man

at Senzor_diag tag, why everything is offset by a word (rotated left by 9)? so bit 0 is in your case at bit nr. 15?? I know s7 1200 is big endian but everything should be offset not only one byte?

SUPER !!!

Did you design the HMI screen yourself or is there a download available?

Great job. But I didn't get the presentation in given link.

Hi, how do you parametrize the IO-Link sensor (set points, activation/deactivation of functions, etc)? do you need ifm´s configuration tool (Moneo) or can you do it directly in TIA Portal?

I want you show About Pressure Transmitter and Temperature Transmitter by IO-Link

Hi Rajvir Singh That is the most clearly video about IO-Link configuration and programming that I've ever seen! I visited your website I would like to Know, if you can create to course about configuration and programming cognex insight 7000.

Dear sir, i have a io link master(AL1102) connected with plc s7 1200. I set up the IP address of s7 1200 is 192.168.0.1 and the IP of io master is 192.168.0.37 . I did every steps like you showed on the video but when i dowload and go online it , a error is appear: not reachable. Can you show me how to fix this problem? Hope you answer. Thanks you very much. Respect.

Dear sir, please make a video tutorial how to communicate with Ethernet interface (TCP/IP protocol) on Siemens Steps 7 software through switch.

Gratefully 😊

Nice vid thank you

thanks

Hey, that was a great video! Is it possible to make a video with slaves to this master and also digital input and output, please?

Hello, thanks for the lessons. My concern is, how to derive the scaling functions..

Hello how are you ? Could you demonstrate what an IO-Link vibration sensor installation with an IO-Link master would look like?

You don't need to calculate/scale sensor raw value with a formula. Last 4 bits for this sensor are not used so it is enough to shift value 4 bits right. 3200 SHR 4 => 200

Hello Sir, I have IO -Link PI2898 pressure sensor installed below tank to sense level in tank indirectly using pressure. From 2 days it is showing 10% more level than actual one. How to solve this issue?

can i get this siemen file, plz?

the IW68 is a word, and your calculate block is a Real, how does that work? or how did you get it to work that way?

Please advise how to create a red line on the graphic for me.

how can I figure out the IP adress of the IO-Link Master? i`ve tried to get it over the ethernet configuration tool, but it still didnit work. pls I need ur help!

i can not download the gsdml for iolinh al100, did know where is it? go to ifm web but can not register account

I cannot find the IO-LINK Master from the given link, kindly help me.

IW68 which is Word data but your Calculate shows Real when i do this i get an error. How did you do this does someone know this

address IW68 and IW70, I can't write it

Why not just use an analog sensor and save money?

That CALCULATE is not precise. Just use the instruction SHR and shift 4 bits, it's much easier and precise.

First viewer

I have another device ifm which is AC1401 AS-Interface PROFINET-Gateway to connect with Siemens PLC 1516, but have trouble with it, if can provide me your contact it would be great