How to Locate an IP Camera on Your Network

Подписаться 10 тыс.

Просмотров 106 тыс.

50% 1

► Buy Hikvision 4P EXIR Dome Network Camera 2.8mm: amzn.to/3A9qu92
► Buy Dahua OEM 4MP H.265 IP Dome Camera 2.8mm: amzn.to/3rChzcu
*As an Amazon Affiliate I earn a small commission on qualifying purchases at no cost to you*
------------------------------------------------------------------------------------------------------
►Subscribe:
/ @wentworthcctv
------------------------------------------------------------------------------------------------------
How to Locate an IP Camera on Your Network
This video teaches viewers how to locate IP network cameras on their LAN (Local Area Network). To locate an IP camera shipped by a manufacturer in static IP mode, you must first switch the gateway of the PC being used to locate the camera to the same gateway as the camera. Most cameras, such as Hikvision and Dahua, use the 192.168.1.XXX gateway.
Buy Complete Dahua/ Hikvision NVR Kits:
-------------------------------------------------------------------
►Complete Dahua 4 Turret Camera 4MP Starlight Network Security System (Smart H.265+):
wentworth-cctv-of-new-england...
►Complete Hikvision 4K 6 Camera Kit (H.265+):
wentworth-cctv-of-new-england...
AFFILIATES
---------------------------------------------------
► Free Audible Trial: amzn.to/32nQu41
► Free Amazon Prime Trial: amzn.to/3qI5zpp
► Kaspersky Virus Protection 50% off: www.jdoqocy.com/click-1005476...
► NordVPN Offer: go.nordvpn.net/aff_c?offer_id...
Follow us
---------------------------------------------------
newenglandcctv.com/
/ wentworthcctv
/ fred-wentworth-03439399
/ wentworthcctv
newenglandcctv.com/blog
Chapters:
Check to verify you gateway IP using ipconfig command: 08:35
Switching PC gateway to 192.168.1.1 to locate IP camera: 09:30
Locating camera with ONVIF Tool: 10:40
Logging into camera/ changing camera settings from Static to DHCP: 10:55
Connect AHD CCTV Camera to DVR using Video Baluns and Cat5 Cable
• Connect AHD CCTV Camer...
Resetting Hikvision Passwords:
• Resetting Hikvision Pa...
#wentworthcctv
#hikvision
#dahua
#speco

Наука

Опубликовано:

1 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@tonyjosephs1396 4 месяца назад

mate i have watched loads of these videos and this is spot on no fancy words that i don t understand it all makes sence now THANK YOU

@WentworthCCTV 3 месяца назад

Glad it helped

@rodneyjohnson8907 Год назад

Thanks. This is EXACTLY what I was looking for. Kudos X10

@almifarji Год назад

You are a genius. Thanks buddy

@ylwpaul Год назад

Thanks for this excellent and clear video. My challenge right now is locating an older ip camera on my network. I can see video from the camera via a P2P app but cannot talk to the camera to confirm its settings nor locate the camera via an ip address.

@CJ_18 5 месяцев назад

Thanks for the video.

@HedroomMax Год назад

Really good tutorial, thanks! I have a HikVision NVR and a few Chinese cameras. The image quality is superb, but I can't configure it's functionality. Those cameras has face recognition, human recognition, tripwire, intrusion area, etc, but I can't trigger the recording on those events. What do you suggest? Thanks a lot!

@Freekniggers 3 месяца назад

He doesn't give a shit about viewers, that's what.

@user-rj6xx2sr1p Год назад

what if im trying to find a camera on my network that i dont know about in my own home...there is four ip6 adresss and in the video onivif d/ev manager doesnt say its a camera would i just use advanced ip scanner on each ip address

@frederickafrihyia6256 4 месяца назад

Thanks, Sir!🙌

@iblorna 2 месяца назад

Hello. Can you please help me as to how I can use my icam2 which was through my cable acct. It is manufactured by Serrcom. It was only 1 cord which is directly wired from the back of the camera and the other end is Ethernet that plugs into power block. I can't fid any info on this configuration. I would greatly appreciate your help

@Lucasimo Год назад

Great advice here. Now I properly understand how IP addresses work. Spent hours yesterday trying to get my new Hikvision camera set up. Watched this video and then realised that the ISP gateway IP must be compatible with the IP address of the camera. I changed the IP address of the camera toi make sure the router could see it, and bingo - it worked! Thanks so much for this video :-)

@mojtabataghizade8320 8 дней назад

so the thing is you somehow guessed or knew what you camera range is and changed your ipv4 according to, but what if we had no idea about the camera ip ? can it be done by MCadress?

@mohammadsharifi4903 Год назад

thanks, How to find the Ip camera Ip that we don't know about ip class and manufacturer and ip finder.

@WentworthCCTV Год назад

Try Hikvision SADP and if you don’t find it use Dahua Config Tool.

@ekow218 2 года назад

Good tutorial, what is the link to the advance IP scanner tool please.

@WentworthCCTV 2 года назад

www.advanced-ip-scanner.com/

@firstrowupperdeck3362 11 месяцев назад

How can this be done if you can't download the unvif device manager.

@winstonparris2996 6 месяцев назад

Bro you are the best

@WentworthCCTV 6 месяцев назад

Thanks so much! We try to help!

@user-um6bf5fs5g 4 месяца назад

Thats all fine and good but like you said you already know the default IP address the camera comes with but what if you have a used PoE camera and you don't have a clue as to what the IP address is then what do you do?

@linkmorehouse Год назад

do you have any knowledge is converting an old xfinity camera to personal use without an xfinity account and use it on a personal camera network

@WentworthCCTV Год назад

It depends on who manufactured the camera. Do you know the OEM? We would have to start there to determine if you can use it. It may be Honeywell, is there a name on the cameras other than Xfinity?

@nealpal7851 Год назад

I have 3 IP cameras on a switch through AP. 1 of the cameras is not coming up in NVR, but when I plug it directly in NVR it works. Any suggestions?

@WentworthCCTV Год назад

The camera may have changed it’s IP address if it’s in DHCP in network setting. When you plug into NVR, it is plug and play so NVR programs it. But when it’s not plugged directly in to NVR it is manually added. So I would plug a laptop into PoE switch and do a SADP scan to locate its IP addresses. Make sure they are the same in NVR channel settings.

@nealpal7851 Год назад

Thank you. Appreciate it

@robertshade8631 Год назад

What can I do if all cameras experience video loss and several months ago internet provider changed router.Would any ports be affected and need changed?

@WentworthCCTV Год назад

Thats a loaded question. What do you mean by all cameras experience video loss? Can you see the cameras at all? Are they online?

@robertshade8631 Год назад

@@WentworthCCTV cameras seem to be online but not able to actual see them on monitor or desktop or mobile phones.

@WentworthCCTV Год назад

What brand name are the cameras?

@robertshade8631 Год назад

@@WentworthCCTV BunkerHill model 61229 cameras

@robertshade8631 Год назад

@@WentworthCCTV they are BunkerHill 61229 series.

@megadun2610 Год назад

Looking at the tutorial,its quite clear you are demonstrating how to make the cam discoverable on your network assuming you know its default static ip add. But the video was supposed to demonstrate to us how to find a camera that its ip address is unknown to you,so the video doesn't seem to address that problem.

@WentworthCCTV Год назад

The title is actually “locating an IP camera ON YOUR NETWORK”. That means on the same gateway. So the video is exactly what we said it is. That said, The method for finding a camera not in DHCP (off your network) is dependent on manufacturer. For Hikvision SADP Tool will do it. For Dahua it’s their config tool. I have videos on both of them.

@robertshade8631 Год назад

Sir how can I get cameras reactivated if new router but cameras show video loss.Certain internet providers like Charter and Spectrum are not much help and BunkerHill has no support staff.Any suggestions!

@johnmurphy9601 Год назад

Hi, thank you for thus, but I'm still stumped. I've got a Dahua NVR with one camera hard wired into the NVR....and when I run the Dahua config tool, it only shows the NVR and not the associated camera?

@lukassbeataddicts Год назад

here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3VAlvtFWOwE.html

@TiagoCapristano 5 месяцев назад

yep. same here. I have no idea of the default ip given to my chinese low budget cams and the video only addresses a brand that has a known IP.

@albarnhill1487 2 года назад

I'm having issues with a smonet wireless system I connect the camera, via Ethernet cable and go into video manager, and hit refresh the system search doesn't locate the new camera, I've tried several times and still nothing there's not a computer hooked up to the system, just the router and the nvr...

@WentworthCCTV 2 года назад

Is the camera PoE and hooked to the built in PoE switch of the NVR?

@albarnhill1487 2 года назад

@@WentworthCCTV Yes connected to the Ethernet port and to power the green light is on, and I hit the refresh button but the search doesn't find the connected camera...

@hocuspocus1171 9 дней назад

My phone has a program on it that ask for the AP mode and still doesn’t connect to the ip camera named yousee

@haight78 2 года назад

Thanks so much for the lesson very informative and extremely easy to follow.

@WentworthCCTV 2 года назад

Glad it helped! This is why we make the videos!

@korankyeisaac5955 Год назад

I am happy to find u here

@fongfongwan3280 2 года назад

Hi, if we change the internet router, the settings for the IP camera must change to the router settings. However, my sineoji camera supplier closed business and I am unable to figure out the sineoji camera IP address. Is there a website to search for it? Thanks

@WentworthCCTV 2 года назад

You can use any network scanner to locate the cameras. The scanner will show IP, mac and manufacturer. I use advanced ip scanner.

@fongfongwan3280 2 года назад

@@WentworthCCTV Hi thanks for your prompt reply. However, my IP cam now is offline because it cannot be read to my new router and my old router internet has crashed. So the advanced IP scanner cannot scan any offline cam right?

@robertshade8631 Год назад

I m experience the same with some BunkerHill brand cameras.Any suggestions!

@misssjones5914 Год назад

How do you find the cameras gateway number?

@WentworthCCTV Год назад

By using the manufacturers configuration tool. Hikvision is SADP and Dahua has Config Tool. Use those to locate your cameras ip address and gateway. Hikvision is generally 192.168.1.64 and Dahua 192.168.1.108 although many new cameras are starting to be shipped in DHCP.

@ezix3753 5 месяцев назад

I have a VNS camera that I cannot find using it’s default IP , I think it’s IP has changed and it doesn’t show up in VNS viewer; how can I locate it ? I appreciate your help!

@WentworthCCTV 5 месяцев назад

Try using Hikvision SADP tool. I believe VNS is manufactured by Hikvision. www.hikvision.com/us-en/support/tools/hitools/clea8b3e4ea7da90a9/

@ezix3753 5 месяцев назад

@@WentworthCCTV I managed to find the camera after doing a hard reset! I appreciate your help tho

@chixxtvofficial5228 Год назад

im having a hardtime to connect my wireless ip cam to my non wireless NVR. please help sir 😣 😣 😣

@WentworthCCTV Год назад

What model number NVR and wireless IP camera?

@allenhopkins3637 2 месяца назад

When you change the Ip address why is the last octet "9"?

@arevalotv4813 2 года назад

hello sir i have problem can two nvr connect to 1 switch with different ip ad but same gateway

@WentworthCCTV 2 года назад

Yes. As long at they are on the same gateway.

@arevalotv4813 2 года назад

@@WentworthCCTV sir why I experience some IP complicit like same ip on the nvr but different IP on the camera

@arevalotv4813 2 года назад

@@WentworthCCTV can I make different gateway with 1 switch

@WentworthCCTV 2 года назад

@@arevalotv4813 not with a normal unmanaged PoE switch. You need a routing device for that

@arevalotv4813 2 года назад

@@WentworthCCTV i wonder why camera works on different ip on the nvr,, nvr gateway was 100.1 while on the camera was 3.1 how it is work

@Artistmaninderdandiwal 20 дней назад

Can we locate camera on wifi , wirelessly on same network

@keltismorgan148 10 месяцев назад

Does this work for wireless cameras too

@WentworthCCTV 7 месяцев назад

Yes

@nitinkikani9503 Год назад

When try to save ipv4 they didn’t let me

@rustywalters80 10 месяцев назад

Can you help me set up my camera

@WentworthCCTV 7 месяцев назад

What brand camera is it?

@bobbyhenderson9419 Год назад

How to change a new ip camera to work on my NVR system

@WentworthCCTV Год назад

You add the camera to the NVR. Go into the channel settings. It will ask for the cameras IP address, username, password and ONVIF port 80

@basilkey2949 Год назад

If I had the IP of the three cam I have. I could find them also. Like most I don't have them and they don't show up on any scan. OK They are static. Now we are back to guessing. Really need to rename this video. Sure you can find it if you have it. It's still a good video.

@WentworthCCTV Год назад

What brand name are the cameras?

@basilkey2949 Год назад

Your video did show me how to change the IP. I just can't remmeber how to get the wifi part to work now. Your video did help find the IP of the cam. So Hats off good video.

@rustywalters80 10 месяцев назад

10 months ago in this idiot show in you on the video didn't even help you out.

@graceandpeace8222 2 года назад

I just want to know how to find surveillance cameras outside my home that are spying on our home?

@WentworthCCTV 2 года назад

That is the first time I have heard that one. If you have a router, you can do an air survey and see anything with a wireless card and look for cameras. Of course, it could be a neighbor with a perfectly legit camera in their yard or in their home. Hard to determine if it is watching you. Could go old school and look for the red IR illuminators at night.

@phillipventer6760 Месяц назад

Why am I loosing connection from phone to camera after power failure. Please help. Thanks

@WentworthCCTV Месяц назад

If the IP camera is in DHCP in network settings, the IP address may be changing when you have a power failure. Change the IP to static and see what happens.

@vtim2973 Год назад

what if you dont have a router?

@WentworthCCTV Год назад

If you don’t have a router, you would have to locate the camera by SADP for Hikvision cameras or Dahuas Config Tool for Dahua. Each manufacturer has its own scanning tool.

@rustywalters80 10 месяцев назад

What if my ip address was chaged and now i cannot find it?

@WentworthCCTV 7 месяцев назад

SADP will locate it and give you the new ip address

@wisammoeali Год назад

what min did he get in point??please i don't wanna hear the info i don't have an exam you know I only want to install

@WentworthCCTV Год назад

There are many manufacturers so unfortunately many different ways to locate a camera so the video is pretty thorough. Thanks for taking the time to comment though.

@wisammoeali Год назад

@@WentworthCCTV you are welcome

@rustywalters80 10 месяцев назад

Have been sitting here for 10 hours. I'm trying to do what you're showing me, and nothing works.

@WentworthCCTV 7 месяцев назад

What brand cameras do you have. Who manufactured them?

@Freekniggers 3 месяца назад

I didn't know Jesus made routers.