How To Make 6-Channel Radio Control. Range 2000m+

Подписаться 428 тыс.

Просмотров 420 тыс.

50% 1

Making a 6-channel, long-range remote control with Arduino and 2.4Ghz NRF24L01 Modules.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
2 x PS4 Analogue Joystick (10K) : s.click.aliexpress.com/e/_DBS...
2 x Toggle switch: s.click.aliexpress.com/e/_DCd...
1 x NRF24L01+PA+LN 100mW (E01-ML01DP5): s.click.aliexpress.com/e/_DmE...
(Optional: More long range version : s.click.aliexpress.com/e/_DeX...)
1 x NRF24L01+PA+Wireless SMD: s.click.aliexpress.com/e/_Dek...
2 x Arduino Nano: s.click.aliexpress.com/e/_Dlh...
2 x 100uF (16V or above) electrolytic capacitors : s.click.aliexpress.com/e/_DBJ...
Female Header Pin (15 pins) 15P Female: s.click.aliexpress.com/e/_DDq...
Universal PCB board: s.click.aliexpress.com/e/_DF8...
10uF electrolytic capacitors : s.click.aliexpress.com/e/_DDV...
100uF electrolytic capacitors: s.click.aliexpress.com/e/_Ddf...
100nF (104) ceramic capacitor: s.click.aliexpress.com/e/_DmU...
LM1117 3.3 Regulator IC: s.click.aliexpress.com/e/_DEp...
2x4 pin Header: s.click.aliexpress.com/e/_Ddn...
80W soldering iron: s.click.aliexpress.com/e/_DD7...
Digital Multimetre AC DC A830L : s.click.aliexpress.com/e/_Dmj...
Digital Multimetre AC DC ANENG XL830L : s.click.aliexpress.com/e/_DEJ...
UT61 Profesyonel Digital Multimetre Tester: s.click.aliexpress.com/e/_Dmt...
AA Battery Box (5xAA Cells) 5 Slot: s.click.aliexpress.com/e/_DFM...
Heat-Shrink: s.click.aliexpress.com/e/_DnM...
CODES, GERBER, CIRCUIT DIAGRAM & PDF FILES: www.rcpano.net/?p=3325&previe...
My Website (KendinYap): www.rcpano.net
My website: www.rcpano.net
#DiyRC #DiyArduinoRC
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
Please Share, Like and Subscribe for More Amazing Videos.
All of my videos: / kendinyap-video

Хобби

Опубликовано:

29 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 396

@Kendin-Yap 4 месяца назад

If you like my projects and want to support me to make them sustainable... Patreon: patreon.com/KNDYP RU-vid JOIN: www.youtube.com/@Kendin-Yap/join

@MelicaMari-Ni-Goon 3 месяца назад

can u make the gerber file for 8ch remote plz

@Kendin-Yap 3 месяца назад

www.rcpano.net/2023/12/30/how-to-make-6-channel-radio-control-range-2000m/ @@MelicaMari-Ni-Goon

@MelicaMari-Ni-Goon 3 месяца назад

@@Kendin-Yap ooh thanks i didn't notice u have done 8 channels version

@smoochies5056 3 месяца назад

@Kendin-Yap it is ok to use ams117 ldo on this ebyte?i just need to add 2x 100uf?

@gourabdutta9331 3 месяца назад

Your 6 channel gerber file didn't download

@hayreddinguzel6630 5 месяцев назад

Elinize emeğinize sağlık yaptığı projelerin dosyalarına kadar paylaşan nadir kişilerdensiniz. Buda sizin amacınızın sadece video çektim bitti olmadığını gösteriyor her vidonuzun altında bütün detayları bulunuyor. Teşekkürler

@steliostheodoropoulos7304 5 месяцев назад

Congratulation. Very nice project and detailed description. Happy new Year !!!

@zaidkabir7277 5 месяцев назад

Thanks sir the one you have made last time was very complicated. This one however is simple yet reliable 😊

@antonioyzarra651 2 дня назад

I'm finishing watching this video and it seems like an extraordinary job! I want to thank you on behalf of those of us who are looking to do something and make it work, this work of yours is far beyond what any mortal can do, it is like a work of art dedicated to those who like excellence and meticulous work Thank you and may your success continue. Estoy terminando de ver este video y me parece un extraordinario trabajo! quiero darte las gracias en nombre de los que estamos buscando hacer algo y que funcione, este trabajo tuyo esta mucho mas alla de lo que cualquier mortal puede hacer, es como una obra de arte dedicada a los que les gusta la excelecia y el trabajo minucioso, gracias y que sigan tus exitos.

@ordinaryperson6703 26 дней назад

Muhteşem proje üstat. Video da gayet açıklayıcı olmuş. Ellerine sağlık

@asgassauro 3 месяца назад

I really appreciate this content. Keep going. U’re fenomenal 👏🏻👏🏻

@alewarte 5 месяцев назад

This tutorial for sure fun and educational. I'm waiting part 2 with stability and range tests :)

@qnaman 5 месяцев назад

i'M USING SIMILAR SETUP. ALTHOUGHT i'M USING STABILISERS FOR 5V AND 3.3V BECAUSE OSCIALOSCOPE SHOVED ME SOME ABERRATIONS IN SOME CASES.

@bobski1151 5 месяцев назад

You showed me allot on how I can improve my radio controller, thank you.

@vdm7776 5 месяцев назад

thanks for the video! I'm waiting for next generation with display and menu to ajust limits and consumptions for servo and ESC. :)

@mehmetozan74 5 месяцев назад

Yine döktürmüşsünüz.

@onmyworkbench7000 3 месяца назад

I developed a system similar to this to be used in The UAV Challenge - Outback Rescue about 16 years ago. I incorporated it into a Futaba 6 channel 72 MHz transmitter after removing the 72 MHz RF section from the transmitter case. This allowed all of the ATV's, servo mixing and servo trim levers in the transmitter case to be utilized in the new 2.4 GHz system. I have a video of it on my RU-vid channel. RU-vid won't let me put a link to it.

@lefablabdequoy8301 5 месяцев назад

congratulation, that is the coolest project ever seen !... thanks for sharing ...

@davideliasfloresescalante8840 Месяц назад

Thanks a lot, these will be just for my rc plane project Im about to start... Great how-to

@herbi102 4 месяца назад

Neat, beautiful, all in all beautiful!

@Everythingisvibration-pj7hv 3 месяца назад

Gerçekten sen bir dahisin hocam ya. Türkiye seninle gurur duyuyor ❤

@kadalkadalan3618 2 месяца назад

I just reading your article nrf24 conection problem.Now everithings is better.Thanks..for your time.

@enesbalc56 5 месяцев назад

Ellerinize sağlık çok bilgilendirici bir video olmuş

@Origami-786 4 месяца назад

Wonderful creativity ❤

@eon147 5 месяцев назад

eline sağlık abi çok güzel olmuşş

@JirawatSu 4 месяца назад

Great job, i love this

@mitsos306ify 5 месяцев назад

This is another great video! Thanks a lot for you time and knowledge. I would like you to make a video with Arduino mega and 10 channels!

@thavaclk5242 5 месяцев назад

I will write in my language. Videolarınız sayesinde bu alana ilgim arttı. O zamanlar 9. sınıftım. 2 kere teknofest iha yarışmalarına katıldım. Çizimleriniz , uçağı yapma sürecinde işime yaradı teşekkür ederim yolunuz açık olsun.

@thavaclk5242 5 месяцев назад

( Turkiye Teknofest )

@morekmek 4 месяца назад

bütçe vs. alabildiniz mi?

@yerbudak 5 месяцев назад

çok güzel bir çalışma olmuş. ellerine sağlık

5 месяцев назад

Üstad eline sağlık.

@burstfireno1617 Месяц назад

Harika çalışma Allah razı olsun :)

@mr.chetow771 3 месяца назад

good instructions, I like your videos...

@selcuktnt 4 месяца назад

Efsane olmuş ellerinize sağlık

@ozgunugzo 5 месяцев назад

Thank you so much ☺️

@SteSOTAGIsarl Месяц назад

great job thanks for sharing

@intelligence482 5 месяцев назад

Now this is nice

@hamadabob3823 5 месяцев назад

شكرا جزيلا اتابعك من الجزائر لقد افدتني كثيرا

@Monthly-creation_gr-7 4 месяца назад

Sir subscriber from India and I am very big subscribe

@richardtittle351 5 месяцев назад

In the UK you should use channel numbers of 80 or less because the max frequency allowed is 2.4835 ghz

@muhammadm1237 4 месяца назад

Man you’re awesome 👏 you have to

@gayanijanathari 4 месяца назад

Excellent brother. Please make lora 20 km range 8 channel transmitter and receiver with LoRa module

@omerbilgin5323 5 месяцев назад

Bir eem olarak seninle gurur duyuyorum hocam .tebrikller.

@omerbilgin5323 4 месяца назад

hocam bizde takip ediyoruz. ama pek yorum yapmıyoruz haberin olsun. sayende yıllardır bu hobiye başlamak için beklediğim ancak bi türlü cesaret edemediğim işler için ilk siparişimi verdim. teşekkürler emeklerin bizi de cesaretlendiriyor

@MirceaPrunaru 5 месяцев назад

Thank you!.

@afdsd 9 дней назад

Awesome!!

@emrhncooll 3 месяца назад

Ne Harika Bi Adamsın Sen Ya

@RoshanYadav-ft5ih 5 месяцев назад

Bro love you you are the best really like you You are the best

@rcpowres 5 месяцев назад

Good job!!!!

@MasboyRC 5 месяцев назад

Impressive 👌

@LaMin-ri6eg 5 месяцев назад

thanks a lot❤❤

@sadeghmollaii9873 5 месяцев назад

Awesome

@adunsky 21 день назад

Great project! Do you have any projects involving an IMU ?

@MrSobreviviente33 5 месяцев назад

Great, change the antenna for 1/4 ground plane and the range will be higher. This antenna is very simple and cheap. try it!

@sonaldey1394 5 месяцев назад

Great video. Can you make one with expo and dual rates?

@gayanijanathari 4 месяца назад

Excellent brother. Please make lora 20 km range 8 channel transmitter and receiver

@sebastianocavalli1357 5 месяцев назад

bellissimo

@zenzen272 5 месяцев назад

Super Awesome

@Andrew-rc3vh 4 месяца назад

The thing about 2.4Ghz is that back in the day when the authorities were deciding which portions of the radio spectrum they could licence out to make money from, the 2.4Ghz band was seen as worthless because it is one of the absorption frequencies of the water molecule. After deciding it was useless for radio communication the microwave oven was discovered by accident by semi cooking a bit of food someone was messing about with due to this very effect. Anyway, due to the low quality of the band the authorities decided to make it licence free and this is why we use it for wifi. If you are looking for range then the thing is not to use this band. The 870mhz band is better. Generally the higher the frequency the more the air attenuates the signal.

@mixeduptv2268 4 месяца назад

If range matters enough, you don't built your own transmitter & reciever. It's a fun project. Plenty of range with 2.4Ghz ELRS for most people also. If range matters only then there's satellites.

@leopoldomolina1763 4 месяца назад

Your comment is very informative 👍🏻

@davidwalker4795 3 месяца назад

@Andrew-rc3vh 3 месяца назад

@@mixeduptv2268 I understand ELRS uses spread spectrum. You can trade bandwidth for range either by using narrow band modulation or as spread spectrum does, it works like statistical averaging to increase signal to noise ratio and uses a wide spectrum. You can go as far as you like with this method until you run out of bandwidth. Also bear in mind the rules say you can only transmit

@aboareef-jk1xv 5 месяцев назад

Teşekkür ederim videolarınız uçağımı yapmamda bana çok yardımcı oldu Sana bir soru sormak istiyorum Bir fırça motorunun kaç volta ihtiyacı vardır?

@taha06. 5 месяцев назад

elinize sağlık. uçuş testleri de gelir mi ? ben de yapmak istiyorum

@hamasharazury7156 5 месяцев назад

Please post a tutorial on making a copy of the microzone controller❤

@Streakgamerofficial 5 месяцев назад

Please Do a Range Test

@ripmax333 5 месяцев назад

A really nice and beautiful project, no doubt about it. But is it worth it nowadays doing it yourself instead of buying a 6ch Tx brand new for little money.

@coat43 5 месяцев назад

Антересно!)

@rftrap9950 10 дней назад

like your video

@funnyprankforlaughter1388 Месяц назад

Hi wonderful job Can you make remote control for agricultural spraying drone

@amitkumar6784 5 месяцев назад

Bro your transmitter and receiver have many features

@hasancinar4664 4 месяца назад

Hocam bu projeyi birde Lora e22 modülü ile yapsanız harika olur

@zainalhas7416 5 месяцев назад

çok güzel

@usr6106 5 месяцев назад

tebrik ederim süper olmuş, trim ayarı için pot koyulabilir belki. 😊

@aberateklehaimanot9804 5 месяцев назад

great project and thanks for sharing,i have issue opening the gerber file though.and i have many nrf24l01 but i am still not able to make them work any of them.i am just clueless where the issues are.did you ever encounter such issues as well?Thanks again.

@user-dw9pg7vh7l 3 месяца назад

Здравствуйте, нужно обернуть плату NRF обычной фольгой, но перед этим каким нибудь диэлектриком, например скотчем или изолентой, и если не изменяет память, ещё нужно подпаять керамический конденсатор на 10 pF, на пины питания, и тогда у вас всё получится!

@Schlaousilein67 4 месяца назад

Cool

@erenelbasan7431 4 месяца назад

Bayraktar iha prototopini yaparmısınız lütfen çok güzel uçaklar yapmışsınız birde iha olursa çok güzel olur

@anshumantripathy5215 4 месяца назад

pls make a videos on how to make the pcb

@hi.IJOE8 5 месяцев назад

can you make a fastest rc plane , yes this is challenge for you 👋🏻

@sotm6078 Месяц назад

If only you did something that really worked.

@Kendin-Yap Месяц назад

It works perfectly when everything is done correctly.

@Omersalih053 5 месяцев назад

elinize sağlık güzel video sorum şu: düşük tetiklenme değeri olan (30mv) bir mosfet biliyormusun yada benzer bir mosfet varsa oda olur

@Kendin-Yap 5 месяцев назад

Bilemiyorum. Araştırma gerektiren bir konu

@Omersalih053 5 месяцев назад

@@Kendin-Yapflysky i6 alıcısı için o mosfeti arıyorum sinyal ucundan arduinodan alıştığım gibi 5v vermiyormuş ölçü aleti ile ölçtüğümde fark ettim

@vaishacnambiar1131 4 месяца назад

Could you make a vedio on upgrading a existing flysky radio transmitter, specifically the CT6B model. Which needs 8 batteries, that too which dries out in less thab an hour and the range is shit plus the servos vibrate(unwanted motion) when operated via the transmitter

@dopo8333 5 месяцев назад

Nice! What plane is this for? I'd love to build the full object.

@Kendin-Yap 5 месяцев назад

It is for general purpose. It is not specific to a model.

@AFSMG 4 месяца назад

I have a prototype of a radio controlled golf cart. I am looking for a transmitter and another radio receiver. They should be configurable so that one car does not interfere with another. I would need at least 100 meters of closet. Can you recommend any? I think they must be 433 Mhz, due to some permissions problem. Thank you very much.

@SciencewithTejas 3 месяца назад

is it necessary to use a ceramic 100nF capacitor or using any other 100nF capacitor would be fine?

@yahyayahya-uf6bc 4 месяца назад

Professor, I ask you a question: Can I change the cardboard that you use in making airplanes with regular cardboard?

@Kendin-Yap 4 месяца назад

Regular cardboard is a heavy material. It will be very inefficient.

@johnchoice1371 Месяц назад

It would help if you talk/explain while performing each step.

@nakilakeddys.7571 5 месяцев назад

Do you have a circuit lay-out for this project? Im from the Philippines by the way.

@bilalfurkan462 4 месяца назад

komutanım herona benzeyen rc uçak yapabilir misiniz? yaptıklarınızı ilham verici ve teşvik edici buluyorum. teşekkür ederim emekleriniz için.

@erkuts6546 5 месяцев назад

Menzil ölçümü yaptınız mı?

@dudycezemer6473 5 месяцев назад

I wanted you to teach me how to boost these 5.8ghz and 2.4ghz signals so I can go further. I'm from Brazil

@prantobiswas5611 5 месяцев назад

Is it possible to add a ESP32 cam module in this board?

@ovalwingnut 4 месяца назад

ShOcK & AWE COoL. 100 points awarded! Truly SUB worthy. Thank you for the video and the detailed punch lists.. Cheers from So.CA.USA 3rd House On the Left. It's true what people are saying... You do RoCk

@alekseysamarin5275 5 месяцев назад

hello, can you add calibration - transmitter with trim

@zahidhamood6079 5 месяцев назад

Excellent sir🎉🎉🎉🎉 But sir trimming buttons is missing...🙏

@Kendin-Yap 5 месяцев назад

I have already published a more comprehensive version with trim feature. I wanted this to be as simple as possible. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RSDfMaanKXM.html

@7UN4 4 месяца назад

Love this variation like all the other versions, I have all the components, make the connections one by one and checked the cables multiple times, somehow I can't make it work. The nrf24l01p modules are not communicating with each other. If you had similar problems or have any suggestions I'm all ears. I tried it with newly bought nrf modules and arduino nano's. I am really curious about what I am missing.

@7UN4 4 месяца назад

Also tried different and simpler codes, Tried connecting the cables directly and to 3.3v of arduino nano without that extra regulator circuit, Supplied nanos with various voltage sources, lipo's, USB ports, lab power supply, I am quite frustrated and I am not kidding its been at least 10 hours just to make it work in these last 3 days. :')

@7UN4 4 месяца назад

Still trying, managed to make a code work but now the receiver cannot communicate with the radio, sender is constantly sending packages but no one to receive on the other hand.

@fatmagursoy7177 5 месяцев назад

bir tane delta kanat yapabilir misiniz

@SagarKumar-888 Месяц назад

BHAI ye plets kaha se parches kre digital jo isme ye component feet krne pade

@Allah_Is_The_creater 3 месяца назад

Is 1400 kv brushless motor work well with 8045 propeller? In turm of thrust and speed and avoid overheating?

@Piotr_Kuligowski 5 месяцев назад

Could you explain why those capacitors are needed? I did something similar but without them and it worked. FYI I am electronics begginer.

@Kendin-Yap 5 месяцев назад

Capacitors provide more stable operation. And it filters out electrical noise.

@werkamdal 5 месяцев назад

Lora 2.4Ghz Turkiyede robottr de var arayip bilgi alabilirsiniz

@BryanCruz-rk6nd 3 месяца назад

Hey bro. I have a question, do you think it is possible to add a ssd1306 oled display to be able to print the channel values and maybe with a voltage divider to the vin, the battery value? I was testing it and it works but not so good, as it generates a kind of latency in the signal, which makes it not work well. Of course all this with an I2C display. Great video by the way.

@Kendin-Yap 2 месяца назад

It is possible but as you have experienced there may be a delay. Arduino cannot run multiple tasks simultaneously in real time.

@BryanCruz-rk6nd 2 месяца назад

@@Kendin-Yap I think it's strange. I also used an Mpu6050 gyroscope module to rotate a servo remotely (i.e. a channel seven for that purpose) and it works pretty well, with no latency and it's also I2C, but with the oled display I can't get it to work without that latency or even sometimes it doesn't even work.

@bmangnote 5 месяцев назад

Thank you @kendinYap

@yunusakmetin9889 4 месяца назад

Arabalara takviye yapılabilecek taşınabilir pavurbank yapabilir misin ustam

@wilfredomartel7781 5 месяцев назад

❤

@DaivyDjimbi 5 месяцев назад

we are whaiting to see the PCB video of your 8 Chanel 2400..

@Kendin-Yap 5 месяцев назад

I have published the PCB files (PDF and Gerber) for receiver. The transmitter is not suitable for PCB. Because it is built with a lot of long cable connections. There is a possibility that I will add gerber and pdf files regarding the 8 channel option to my website in the future for the new 2000m+ version.

@mehmetyaman9385 Месяц назад

çok başarılı bir çalışma olmuş tebrikler. Ancak sizin kullandığınız gibi PCB leri nasıl temin ederiz 0:18

@Kendin-Yap Месяц назад

PCB yi kendim yaptım. Onu yapabilmeniz için gerekli dosyalar linklerde mevcuttur. Diğer seçenek pcb hazırlayan ticari firmalar da var. Onla için gerekli gerber dosyaları da linklerde mevcuttur.

@amitkumar6784 5 месяцев назад

Bro make a drone using this Transmitter and receiver 😊