Making a 2400 meters LONG RANGE 8-Channel & Digital Trim Radio Control For RC Models. PART-2

Подписаться 426 тыс.

Просмотров 683 тыс.

50% 1

How to make long range remote control with 100mW NRF24L01 PA LN (E01-ML01DP5) 2.4Ghz module and Arduino.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
RU-vid JOIN: www.youtube.com/@Kendin-Yap/join
Necessary materials:
2 x PS4 Analogue Joystick (10K) : s.click.aliexpress.com/e/_DBS...
2 x Toggle switch: s.click.aliexpress.com/e/_DCd...
2 x 100mW NRF24L01 PA LN (E01-ML01DP5): s.click.aliexpress.com/e/_DmE...
2 x Arduino Nano: s.click.aliexpress.com/e/_Dlh...
2 x NRF24 wireless 3.3v adaptor: s.click.aliexpress.com/e/_Dlm...
2 x 100uF (16V or above) electrolytic capacitors : s.click.aliexpress.com/e/_DBJ...
4 x Female Header Pin (15 pins): s.click.aliexpress.com/e/_DDq...
2 x 10K potantiometer: s.click.aliexpress.com/e/_DCV...
Universal PCB board: s.click.aliexpress.com/e/_DF8...
AA Pil Kutusu (6xAA Cells) : s.click.aliexpress.com/e/_DFM...
veya 18650 pil kutusu : s.click.aliexpress.com/e/_DER...
5mm LED: s.click.aliexpress.com/e/_DB6...
330R Direnç: s.click.aliexpress.com/e/_DFk...
Rocker buton (10x15mm): s.click.aliexpress.com/e/_DDv...
Tact buton (6x6x7): s.click.aliexpress.com/e/_Dm2...
Screws: s.click.aliexpress.com/e/_DEv...
Heat-Shrink: s.click.aliexpress.com/e/_DnM...
26AWG cable: s.click.aliexpress.com/e/_DCR...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS & CODES: www.rcpano.net/2022/10/30/mak...
OR tinyurl.com/49treus3
PART-1 Video: • Making a Long Range Re...
Radio Box 3D STL Files: drive.google.com/file/d/1DkdL...
My Website (KendinYap): www.rcpano.net
Required materials for regulators:
1uF electrolytic capacitors : s.click.aliexpress.com/e/_DDV...
10uF electrolytic capacitors: s.click.aliexpress.com/e/_Ddf...
100nF ceramic capacitor: s.click.aliexpress.com/e/_DmU...
7805 5V Regulator IC: s.click.aliexpress.com/e/_DDv...
7809 9V Regulator IC: s.click.aliexpress.com/e/_DlX...
80W soldering iron: s.click.aliexpress.com/e/_DD7...
Digital Multimetre AC DC A830L : s.click.aliexpress.com/e/_Dmj...
Digital Multimetre AC DC ANENG XL830L : s.click.aliexpress.com/e/_DEJ...
UT61 Profesyonel Digital Multimetre Tester: s.click.aliexpress.com/e/_Dmt...
My website: www.rcpano.net
#DiyRC #DiyArduinoRC
Thank you for watching. Please Share, Like and Subscribe for More Amazing Videos.
All of my videos: / kendinyap-video

Хобби

Опубликовано:

29 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 827

@JannieH Год назад

Simply incredible how far electronics have advanced in the last 40 yrs. Back in the 80's I built a six channel on the old 27Mhz band. The receiver was most daunting. True AM super heterodyne technology, hand turned pick-up coils with 455Khz IF coils. Miracle to have got it working at all. Well done on this very well presented project...Brilliant.

@orange_tweleve Год назад

Hand tuned couls , rhat truly something tbh

@yaminsiddiqui4690 Год назад

legend

@paradiselost9946 11 месяцев назад

im fiddlinga round with a project retro build... 50s style. a motor driven PWM? the tX is the easy bit actually... just CW.

@dubab.249 4 месяца назад

I remember those times, it was enthusiasm and not this today, you type in your laptop and you're done.

@ashwinrawat9622 15 дней назад

Hi, where can I find design for such a thing? I would love to build something like that.

@marcofe82 Год назад

Hi, it's absolute impressive what you've done! I can't imagine how much effort you spent in this!Stunning!Lastly, Thank you so much to have shared this project!

@rctruckjp Год назад

Me encanta sus proyectos. Quisiera aprender más de usted. Me toca meter el esfuerzo para lograrlo pero con sus videos tengo guía para lograrlo. Saludos desde Colombia. Sigue así mi hermano.

@juliocesarvelandia3386 Год назад

Muy elaborado, de principio a fin. Total: Una obra de arte. Y para hacerlo, hay que saber si o SI.

@trentsuveges7622 Год назад

Dang that's gotta be the coolest thing I've seen ever!

@antonisvianos8017 Год назад

Till now have made 6ch control, drone, retracts, rc airplane all work perfect. With few words Kendin is MASTER!!!!!!!!!

@333donutboy Год назад

This is going on my "project list". I subbed because I'm looking forward to more content. Thanks!

@brianparisien9262 Год назад

Fantastic! I've been looking for something like this for a long time! Many thanks for your generosity and sharing.

@knightflyer909 Год назад

Excellent range test! The best I have seen yet. Thank you.

@jonoyb4721 Год назад

Purely awesome! Amazing skills! Congratulations!

@Jabanoflier Год назад

Awsome build. Great flight too.

@benjaminjohnson6476 Год назад

Very nice. Seems like a cool project to do. Love you're content type. Keep it up!

@mmtechchannel8002 Год назад

It's really amazing. It has a really long range. This distance is enough for me

@senoltetik6709 Год назад

bende devamını bekliyordum bu işe gönülvermeye hazır ama maddi yetersizlikleri dolayısı ile başlamayan yeni nesil için çare olmuşsunuz .teşekkürler.

@dudkipl2802 Год назад

amazing. perfect for anyone who has time and doesnt want to waste money on an expensive RX and TX

@maraqltv7748 Год назад

mini bayraktar lan adam. hela olsun abi !

@MehmetSutas Год назад

Mükemmel bir proje olmuş. Elinize sağlık.

@weareelectricgi Год назад

very cool and very clean build. awesome 👍

@surveyengineer2372 Год назад

Hocam helal olsun. Diyecek söz bulamıyorum artık.

@khaleedan 3 месяца назад

Well done mam really unbelievable ❤❤❤❤

@mehmetalikocaslan5152 Год назад

Elinize emeğinize sağlık. Çok güzel bir proje olmuş. çalışmalarınızda kolaylıklar dilerim.

@stargazer279 Год назад

im glad i found your channel, i will be able to build some projects with your videos as reference

Год назад

Harika bir maker örneği olmuş hocam, ellerine sağlık

@beytullahaztekinn Год назад

This project is wonderful.

@ismailmercan5393 Год назад

Mükemmel ötesi bir çalışma emeğinize sağlık 👏👏👏

@josefix1987 Год назад

Thank you so much for this educational video, I learned so much.

@allengentz7572 Год назад

Thank you for sharing this project well explained and would be an excellent challenge for me.

@StyleTechnique Год назад

Allah razı olsun, bu projelerinizi bizimle paylaştığınız! Çok sağolun!

@varunkulkarni3240 Год назад

very nice projects, watched all videos, nice keep it up 👍

@user-ld2mv2hr6r Год назад

Thank you. I'm jealous of your skills

@kuro1803 6 месяцев назад

coolest thing i eve seen today

@frankdearr2772 Месяц назад

great topic, thanks 👍

@fluffyflunk Год назад

Nicely done. Simply beautiful. I'm very tempted building one for myself even though I don't need it since I'm blessed with the TX16S.

@berkaykara1255 Год назад

Hocam çok güzel çalışmışsın tebrik ediyorum 🥹👏👏

Год назад

2. videoda geldi. Gerçekten güzel çalışma olmuş. Emeğinize sağlık.

@hadibiseyleryapalm2870 Год назад

Mükemmel olmuş. Kaliteli içerikler için teşekkür ederim.

@mrwaqas6208 6 месяцев назад

Thank you so much to have shared this project🥰🥰

@umitbaba5690 Год назад

Really amazing buddy, I don't know what to say, amazing! I will make too

@pcantele Год назад

Wonderful job!👍

@IzergilBaba Год назад

It would be interesting to try the same project, but with the ESP32 with external antennas connected through the ESP-Now protocol in Long-Range mode. The price range will be the same, and ESP32 can be programmed in Arduino IDE. Also, the weight of the receiver can be reduced using some tiny ESP32-C3 modules, such as Seeeduino.

@drumbum7999 Год назад

no.

@downey2294 9 месяцев назад

how would that work?

@c.n.palanivelrajan6080 Год назад

Thank you for awesome and incredible idea

@mckone9 Год назад

Eline sağlık hocam. Good job

@Toryh86 Год назад

Very nice build quality....I really want to learn Arduino....time to start studying

@Lukenukkem Год назад

Nice work. I may have taken the time to etch out my own circuit board.

@deneyselhobi9333 Год назад

Hocam ellerinize sağlık Çok güzel bir çalışma olmuş tebrikler

@zahidhamood6079 Год назад

Outstanding sir... One the best video... Appreciated 👉💯💯❤️

@arunsasidharan2577 Год назад

Simply awesome. Can you make a auto pilot too?? That would be great 👍

@slowpasha Год назад

Abi sen napıyon ya, işi baya ileriye almışın reis 😂👍

@tekosis1 Год назад

Elinize sağlık çok güzel çalışma.

@conorstewart2214 Год назад

For the Transmitter you don’t need to connect power and ground to the switches, you can just use the internal pull-up or pulldown internal resistors.

@onebreh Год назад

it changes the behaviour of the pot. For linear input you need to connect power and grund too.

@conorstewart2214 Год назад

@@onebreh I know how a pot works, I am on about the toggle switches which they connected to both power and ground, they are connected directly to a digital pin, they have nothing to do with the pots and for switches you only need to connect it to either power or ground, not both, and use either pull up or pull down resistors which are present in the arduinos digital pins. Also pots don’t need to be linear, you get logarithmic pots too. Edit: see how they did the buttons, they can do the switches like that too with only 2 wires.

@nickoyumicko7954 Год назад

Thnaks for your sharing , good job 👍

@motivational67624 2 месяца назад

very good 🎉🎉🎉

@aliseref9767 Год назад

Çok güzel bir çalışma olmuş, ellerinize sağlık.

@skatehero7703 Год назад

Harika olmuş. Emeğinize sağlık.

@EdgarMorales-vw2wr Год назад

Good JOB CONGRATS!!!

@gauravkhanekar3924 Год назад

Really Awesome man...😍🌹👌🏻 Can you make this Tx with some more extra Channels and Colour touch display like professional Tx16s. With different kind of RC model selections, and custom starup Logo and custom startup audio and other audio for mode selection. Thank you...😃🌹

@isayildiz6478 Год назад

Çok güzel bir çalışma olmuş tebrikler

@JaydenLawson Год назад

Was hoping that you would build the vTX system too! That's what I'm most interested in

@conorstewart2214 Год назад

VTXs are very complex devices, they are far beyond what a hobbyist can do, just like most kinds of radio control, including the modules used in this video, they just use off the shelf radio modules they didn’t design them themselves. Video in general is a lot more difficult to work with and in drones or robotics they usually just take the camera and connect it to a VTX sometimes through an OSD chip.

@AntiComunaBR Год назад

awesome project, I have a question, I was using the NRF in my project but comunication was causing some problems, in the RX code, you also use a WHILE () function to wait something coming from TX, but if it starts losing some packages you will screw up the rest of your timings, did you face any problems with that ? cheers.

@wallaguest1 Год назад

looking great

@adalante35 Год назад

çok güzel bir çalışma olmuş elinize sağlık

@alexanderrodriguez9434 Год назад

Hola amigo excelente proyecto

@karangupta4978 11 месяцев назад

I'm gonna attempt this built this summer... wish me luck guys.

@SrunEmpire Год назад

Nice and love your content

@g.p.7880 Год назад

Nice 3d model 👌👌👌

@jezclark3536 Год назад

This looks great! Is it possible to get the CAD files for the transmitter case? I need to make it a little bigger to include another 2 joysticks and a display. If you could that would be great.

@dobo1980 7 месяцев назад

When changing the channel inversion to control the servo, I noticed that there was an error in the assignment of channels to pins. Namely, the A3 NANO CH4 pin of the transmitter controls the D0 (RX) pin of the ATmega328P-PU_DIP CH1 of the receiver. It is similar with A1 - CH2 of the transmitter, and on the receiver it is CH3 - D3. TRIM in the transmitter works well for me. I haven't changed anything in the code, the pins are assigned as in the shared code. How and where can this be fixed?

@paimo27 Год назад

This is very awesome project

@CLOSEGAMER8847 Год назад

Yes

@qqpp6017 Год назад

Thank you for the good video. ^^

@hassenfit2589 11 месяцев назад

You are genius Bro

@hh-vq3cz Год назад

Would you let me know how do you install DJI unit on the RC airplane? Do U have any different controller transmitter for controlling the cam?

@KHALED-sk5cu Год назад

Amazing bro.. 👌

@alexforget Год назад

Can the esp32 do something similar? Already has the wifi transmitter and arduino compatibility? Very cool project.

@user-su4ln3nq7q 7 месяцев назад

이건 뭐 봐도 못만들겠다...진짜 대단하네 ㅎㅎ 수신기 만드는 방법도 있나요?

@doverivermedia3937 Год назад

You sir, are a GENIUS ! I've still got my old, non working vintage 'fleet' UK brand Tx from when I was 12 (i'm now 58).I'm also studying arduino and coding and now have a 3d printer, so this will be a fabulous project but using the old Tx & joysticks as the housing.It will be a real nostalgia trip. Question: Is there any difference in latency with the DIY system compared to shop bought systems ? And are there any interference issues ? or any other disadvantages with the DIY system i should know about ? Thank you for your excellent content. Amazing resource !! uk.

@Kendin-Yap Год назад

Thanks. Latency is higher than commercially produced RCs. Especially at long ranges. But a typical model airplane is flown within a radius of 150-250 meters. Therefore, the delay remains within reasonable limits. Signal link stability is also not as good as commercial production RCs. This type of Diy remote control systems is sufficient for models with small electric motors. But I don't recommend it for big and fuel engine models. But I should also point out that; I do not recommend very cheap (under 40-45 usd) commercial production RC systems for fuel models. Because they also have signal stability problems.

@doverivermedia3937 Год назад

@@Kendin-Yap Thank you for the excellent response/advice. I will definitely bear all that in mind when choosing my application carefully.

@user-gf7qo7lm9y 11 месяцев назад

Hi @KendinYap, I have a question. I already made the transmitter and the receiver you showed in the video, but there is a problem. The transmitter sends signals(printing values in serial monitor), but the receiver does not receive them. The receiver POW and RX LEDs are on, but the transmitter LEDs - L and TX are shining very weakly. What can I do to fix this problem? Thanks a lot! :D

@OMNI_INFINITY 8 месяцев назад

Thanks!

@ardacoskun481 Год назад

Türkiyedeki alışveriş sitelerinden malzemeleri aldığınız zaman 750 tl tutuyor ( kapsız) fiyatı tutuyor. ardiunosuz 430 tl tutuyor.güvenilir sitelerde kumanda 2000 tlden satılıyor. paranız varsa direkt kumanda alın geçin ama paranız yoksa aradaki farkla batarya sarj aletini almaya yetecek kadar para var.

@jefersonmedeiros7677 Год назад

Very nice !

@dz-abouttechnique1849 Год назад

Nice video!

@bulenboncuk426 11 месяцев назад

vidio kaçırmışım bügüm karşıma çıktı son derece ınanılmaz güzel 👍👍

@amir.mahfoozi Год назад

This is a rival to the Bayraktar TB2 😁

@RobsonMarcelinodeMatos Год назад

Wow... very cool controller. Is it compatible with "SP Racing F3 Deluxe" drone controller board? Thanks

@bdrkrg5460 Год назад

Hocam çalışmalarınız çok güzel sizden 3d programlara dair bir videoda bekleriz

@ysrkasem Месяц назад

Hi, great videos ❤ Can you please do a video to use the same systtem tx and rx for a quadcopter! Thank you in advance.

@anthony3D Год назад

Bon travail 😎👍

@eneskucuk1094 Год назад

Merhabalar, bu yaptiginiz kumanda ile ihayı kontrol etme ve uçuş videosu da gelir mi? Düşünüyor musunuz? Meraklı olanlarin ilgisini cekebilecegini dusunuyorum.

@kemalylmam8684 Год назад

On numara beş yıldız...

@hamzamederati9933 Год назад

öncelikle emeğinize sağlık çok güzel olmuş Bu kumandayla uçuş yapmanızı bekliyorum menzili çok çok merakediyorum

@jasonhayward6965 Год назад

useful stuff

@muhammetusta4198 Год назад

bu kumandayı yapmak istiyordum kumandalar pahalı geliyordu ama sonunda hayalime kavuştum ve kumanda sipariş verebildim kendin yap videolarını çok seviyorum yaptığın maket uçakları çok özenerek yapıyorsunuz inşAllah kumanda geldiği zmn bende sizin gibi bir tane maket uçak yapabilirm iyi günler

@agahgokdag1845 15 дней назад

Yaptın mı?

@muhammetusta4198 15 дней назад

@@agahgokdag1845 kumandayı aldım uçağıda yaptım pervanesi kırıldı sipariş verdim geri pervaneyi takıcağım ve uçurmaya devam edebileceğim

@mohammadnazmi6146 Год назад

خیلی خلی عالی بود

@bazukaloe Год назад

great job. The only thing missing is a remote control of the battery charge.

@henkketelaars Год назад

Hi Kendin. I've build the radio and receiver and it works. But after a while (approx. +/- 10 minutes) the transmitter comes to a hold. I have to turn it off and on again before it wil works again. Do you have any idea what the problem can be??? Kind regards Henk Ketelaars (The Netherlands)

@jozefnovak7750 Год назад

Super!

@rckhmer6780 Год назад

ល្អណាស់😊😊❤❤

@rustom767 7 месяцев назад

hello, thanks for this video i made the transmitter and receiver and their is a connection between them but i have a problem no channel on the receiver is resetting to 0 for example if i connect a led to a potentiometer CH the led doesn't turn off if the potentiometer is all the way down but i can increase the brightness of the led when i move the potentiometer up even servos don't move or the motor on esc ,i can control the throttle but not turn it completely off. the same happen with switches can't turn of a led but can increase brightness of led when turned on. please if you have any idea tell me thanks in advanced :)