HOW TO MAKE A 3D PRINTED F1 GT WHEEL

Подписаться 221 тыс.

Просмотров 226 тыс.

50% 1

How to make a DIY F1 or GT style 3D printed sim racing steering wheel. Build that can be customized for your simulator by using LEDs, a LCD or different dash displays.
PARTS LIST
USB Joystick Encoder ebay.us/AdkVYz or BG bit.ly/387SYCE
Momentary buttons ebay.us/K1vTAE
Bolts for wheel
M6x25mm Cap socket ebay.us/NaQfM4
M3-M6 Nuts ebay.us/SciP1k
M5x 50mm Cap socket ebay.us/NaQfM4
M3x 35 Countersunk ebay.us/YaBl86
Carbon Vinyl ebay.us/ItSYEQ or BG bit.ly/2JhDwa8
This site contains affiliate links for which I may be compensated
Steering wheel 3D Files Amstudio Website - bit.ly/2B7pFji
Magnetic Shifters included
Magnetic Paddle Shifters Build video Step by Step - • MAKE THESE MAGNETIC PA...
Parts per Paddle Shifter
2x M3 Cap socket screws 10mm ebay.us/KembQw
5x M3 Cap socket screws 30mm ebay.us/KembQw
2x Neodymium magnets 8x5mm ebay.us/Djik1n
1x Micro lever switch ebay.us/XeDXOk
Wire bit.ly/3zSeUAs
This site contains affiliate links for which I may be compensated
TOOLS
• Flat and round File ebay.us/j4UKtw
• Sandpaper ebay.us/MoBTpw
• Scissors ebay.us/fKB3oZ
• Allen keys bit.ly/2MBv0DD
• Third Hand bit.ly/3SoZsmT
• Solder bit.ly/3oQsyhe
• Soldering Iron Cheap bit.ly/3cWeEYh
• Best Soldering Iron bit.ly/3cWeEYh
• Butane torch ebay.us/44ww4A
• Utility Knife ebay.us/qcTpDO
• 3D printer bit.ly/3zRHPVf
• Wire cutters bit.ly/3Bz8acd
• Wire strippers goo.gl/4PFXny
• Heat proof solder mat bit.ly/3SonQ7Q
• A3 cutting mat ebay.us/WEKZ7w
• Vinyl Squeegee ebay.us/XK2YpG
3D Printer bit.ly/3zRHPVf
3D Filament bit.ly/3zPNg7l
This site contains affiliate links for which I may be compensated
Thank you for watching, all questions are welcome.
Want a tutorial or project built, leave suggestions in the comments.
Share the video with a friend who would like this!
AMSTUDIO channel for other DIY projects.
/ @amstudioprojects
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Хобби

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 320

@itchie 6 лет назад

this is the best sim diy channel on youtube ..serious

@amstudioprojects 6 лет назад

Thanks!

@bobross5778 5 лет назад

For sure, no competition.

@micahtritscher951 5 лет назад

Not disagreeing, but how many other diy sim RU-vidrs do u know 😂

@pakowsky2656 5 лет назад

Yes but expensive

@cloudstoragexd5101 5 лет назад

@@pakowsky2656 compared to buying from some company, the price is competitive, and cheaper most of the time. It's for people with time and want to have the ultimate customization for their rig

@RUsOmaDDbrO 6 лет назад

today my ender 3 arrived after 1 month of delivery, cant wait to try this out 👌

@amstudioprojects 6 лет назад

Nice!

@focke_wulf4133 6 лет назад

Try doing diy seat rumble please

@WrLck 6 лет назад

Please more steering wheel videos!!!👌🏼

@pirozcontractor6006 6 лет назад

Nice, now can we have some magnetic paddle mods for the G27/9 wheels? I'm sure you know how mushy and strange the paddles feel. Alternatively, could you do a guide to wiring the TM1836 displays (the one at 2:56) with Arduino nanos? I'd also like to see how you can connect buttons to the 8 button terminals at the bottom and get them working as well, so there is no need for 2 USB cables. Please, I know you've done a video on a TM1386, but that was a separate dash and I want to see how you could integrate it with the buttons so that the end result could look like this wheel and the TM1386 (In a way like the BMW Williams wheel of 2004 that Juan Pablo Montoya drove).

@joseenmanuel1 5 лет назад

Please make a 2dof sim, this is the best DIY channel ever

@rjl95 6 лет назад

You know what would be great? A design for a single-axis F1 type magnetic shifter. So that you can up and downshift on both sides of the wheel!

@ALLRNDCRICKETER 6 лет назад

Technically what is a WRC shifter paddle, yes I'd love to see him make one of them 👌

@rjl95 6 лет назад

I think you mean the ones that don't have one central pivoting point? E.g. you could drive with 1 shifter paddle on one side. The F1 type have one shared axis in the center which they rotate around. So the left and right shifter meet in the middle basically.

@ALLRNDCRICKETER 6 лет назад

@@rjl95 I get what you mean. I don't think it would be possible to 3d print a system something like what were saying, due to the face that there needs to be the wheel mounting point in the middle, plus on most F1 wheels they come above the wheel mounting, and are very thin. 3d printing something such as would no doubt break with wear and tear over time

@pirozcontractor6006 6 лет назад

@@rjl95 i think Fanatec have already done that with the 650S wheel

@rjl95 6 лет назад

Yes they did, but now we need a freely available 3d-printable model/project :D

@JasonMatano 5 лет назад

Built this today with my little one. It is the perfect wheel for him since it's a little bit smaller in size than the Thrustmaster wheels I have.

@TrevHowsonDemon82 4 года назад

Hi I know it's been a while, but can you remember how long it took to print this in total? Places by me charge by the hour to print and trying to get a rough cost.

@playmaker5601 6 лет назад

You Sir, are awesome! Best content for DIY sim racing. Lapping the competition! I think I will cya on Patreon very soon :)

@MrAstor99 6 лет назад

Awesome work as always!

@liampink8704 5 лет назад

can you please make a video about designing this and just things in general in fusion.

@non7sens 6 лет назад

I like these kind of 3d projects. Great video!

@프레디khjfreddy 6 лет назад

YEAH!!! Another video! Please upload more frequently ;-) By the way what printer do you recommend for these projects? I think it should be pretty big....

@amstudioprojects 6 лет назад

I used the Ender 3

@akroutsamo 6 лет назад

Well done, but always with a Logitech Wheel base , how about DIY the hole thing 3d printed Keep up the good stuff

@rtfelix2288 6 лет назад

Wow! Excellent stuff as usual. Definitely gonna have to give this one a try... now to get a 3D Printer!

@dariobauer1175 6 лет назад

Stop make me spent my goddamn money :D

@klemy1973 5 лет назад

how much does it cost? 3D printing, electronics, etc.

@candle_eatist 6 лет назад

Nice, looks like the lower tier Formula #(number somthing i dont know) steering wheel in assetto corsa

@srph6807 6 лет назад

very nice project, congrat ! you helped me a lot for my button plate project

@ollemauleonwolter848 5 лет назад

Can you make a toutorial on how to get the horn on an aftermarket steering wheel working for the g29, like your OMP steering wheel :) and i think you're the best diy channel on yt, i love the videos

@JoaquinScansiGarcia 6 лет назад

Could you make an f1 style clutch for the logitech g29? Its my dream.

@ramounwoods 9 месяцев назад

Idk how I’m so late finding these tutorials but after seeing how long they’ve been up I have to ask.. would you be willing to revisit these projects in an attempt to make some DIY wheels that’ll be compatible with MOZA bases?

@BDoh 6 лет назад

Looks awesome 👏🏼 Wish I could use it with a Fanatec CSL base

@yakfish36 6 лет назад

You can but you need to sacrifice a current wheel to get the connectors and boards. Its a bit of effort but doable. Im also looking into tge blutooth connection set ups on the new dd and hoping to retro fit one to my 2.5 will post how it is done if i can get it working that way as it will be neater.

@DCtropical 6 лет назад

Can you make a tutorial for analog clutch paddles (behind the wheel) like f1 cars have? Thanks!

@Pepeex22 5 лет назад

Good idea!

@DCtropical 5 лет назад

@@Pepeex22 thank you!

@alexsib444 4 года назад

you could stack 2 magnetic shifters and cut off from the clutch one in order to make it smaller (that's what fanatec does at least).

@chickenjonte_ 4 года назад

@@alexsib444 it wont be analog

@alexsib444 4 года назад

chickenjonte true I cannot argue

@sheu_her 6 лет назад

*Tutorial for the complete wheel setup plzzz* That will be extremely dope

@jamieburke3909 6 лет назад

nice vid man!

@amstudioprojects 6 лет назад

Thanks!

@joshblockley5628 6 лет назад

Nice I !

@OliverPohl 4 года назад

That looks great. Having a 3d printer seems to be standard by now.

@vaggelispapadimitriou9135 6 лет назад

Can you do a wheel rim mod for the thrustmaster t150 ? nobody has a good one on youtube

@danielprevratil3149 6 лет назад

There's one thing holding everyone from it. I have one as well and planning to do it, the reason is that in the rim there's pcb with those buttons wired to it. If you disconnect it, the wheel won't be recognized in windows. I have seen that you can buy small pcb that will be placed inside the wheel and pretend to be the one in the rim. Otherwise it's pretty much the same as other rim mods.

@vaggelispapadimitriou9135 6 лет назад

@@danielprevratil3149 but can you keep the buttons ?

@stunttijoona7897 5 лет назад

@@vaggelispapadimitriou9135 nope

@AlanGonzalez-om4rr 5 лет назад

@@danielprevratil3149 I'd like to help solving that, but i don't have the wheel. Shouldn't be easier to wire it to the inside of the wheel base?

@danielprevratil3149 5 лет назад

@@AlanGonzalez-om4rr Not sure what u have on mind, but if u think to wire the buttons to the wheel base, you can't, because they're all wired to the pcb in the rim, which is connected to the base with 6pin something :D

@kitcut40 6 лет назад

Hello, can you make a tutrial for make a push pull shifter like in wrc. Thank you and good video / design

@MarcoGenio 6 лет назад

Damn that’s good work keep it up boi 😁👍

@amstudioprojects 6 лет назад

Thanks Marco

@simculture8576 5 лет назад

amstudio I would love to see you make a bluetooth version of this!

@amstudioprojects 5 лет назад

Sounds good

@yakfish36 6 лет назад

You are the best mate

@amstudioprojects 6 лет назад

Thanks!

@LeandroCRZ 6 лет назад

Always the best!!

@bivandi3101 5 лет назад

Great video! You should do a Fusion360 tutorial of this!

@edcastanha 6 лет назад

Hello, congratulations for the beautiful projects and the sharing initiative. Could you inform the time for completion of this impression?

@ivanbukvic5341 3 года назад

Could you please make a video on how to make like that drifting type steering wheel i need an idea for a wheel cus i am making totally diy steereng wheel and pedals.

@mosan6414 3 года назад

Would this fit onto the fanatec clubsport or podium wheel hub

@JohnSmith-xs4fq 5 лет назад

“Small amount of glue” uses the entire stick

@Jan-xj1io 3 года назад

But how can you feel force Feedback from the g29 but use butten and shifter input from the wheel

@StanCodes 5 лет назад

What are the dimensions of your magnets used for this project?

@amstudioprojects 5 лет назад

8x5 Link in description

@privatepengu 6 лет назад

You are amazing!

@SimRacerRich 9 месяцев назад

Hi great video . Just starting out with 3d printing. Do you know where I can find files for these ?

@toreclipsian Год назад

Sorry for bothering but I am interested in knowing on how much time did it took to 3d print all the parts? Thanks

@CarlosMtnez 6 лет назад

Hello, awesome videos, you are very talented, may you tell me if you really used that chinesse filament from BG to make that pieces? Im looking for a good quality and cheap filament, and your prints looks really great. What brand of filament did you used? Thanks in advance!

@CW7_ 6 лет назад

Don't try to safe money on filament. There are already enough sources of potential errors when it comes to 3d printing that you should rule out the filament factor at least. Any filament between $20-30 with good reviews on Amazon should be alright.

@chanaquid 6 лет назад

great video! subscribed !

@amstudioprojects 6 лет назад

Thank you!

@MarcoForestieri 5 лет назад

hi, can i put a rotary switch with this USB encoder or buttons only? thanks...

@chemicalspore 5 лет назад

Sooooo this is sturdy for hard core racing?

@mkperformance5353 6 лет назад

Great video ! ;)

@tianyifang6644 4 года назад

Can you provide the template of the front cover, I've just bought the plan from your website.

@mikejones-nd6ni 9 месяцев назад

So after I'm done building this do i need to do any programing of the buttons or do they all just work?

@kyronwoodson 2 года назад

are there any files to convert this to fit for 70mm wheel spacing?

@SarielFreddy 5 лет назад

how about making a exta Monitoring Backmirror?

@madatyoutoob 6 лет назад

Amazing!

@amstudioprojects 6 лет назад

Thanks

@meggerja 3 года назад

What is the size of the print area I need to print this?

@ShowPvP 3 года назад

What logitech base is this? I can't seem to find it

@Ferra1511 3 года назад

Where can we get the lcd button plate?

@ppdolecki 4 года назад

what kind of small LCD screen can fit?

@ignacioherrero9374 5 лет назад

Best regards mate!!! great job yours congrats. I have logitech Momo racing rig and I dont know if spacers and quick release stuff will fit properly over the stering wheel mount. Let me know please , and if will be afirmative you´ll have new order soon.

@overundersteer5953 4 года назад

With which program or app did you do the pieces of the wheel. For the printer, because this is absolutely amazing.

@randomguymaniac Год назад

hows the forcefeedback ?

@SebiKoerner 4 года назад

The link to the buttons doesn't work anymore.

@joserosado7352 5 лет назад

Good and best video, can you bring the file in dxf format for make steering wheel on my cnc machine

@javierdashg204 6 лет назад

🔥🔥🔥🔥 this is amazing, I might give it a go. What is the size of the wheel??

@amstudioprojects 6 лет назад

280mm

@NigelStegmeijer79 6 лет назад

Is it possible print anything to use it on a fanatec base without the universal hub?

@Alex_1652 6 лет назад

Can you make a 3D printing tutorial please

@mechedrei3036 5 лет назад

don't you need an expensive wheel base first? like a fanatec one?

@accelized3599 4 года назад

Nice! Is this solid enough for heavy duty usage with 100 FFB ?

@jackbrimstone1004 4 года назад

Hey is it possible to use the usb encoder board and wire it into the g29 to work with the ps4 i dont want to use the original g29 button board and also connect it back via the 7 pin connector from the wheel

@JoseLuis-ez6ef 4 года назад

Hi, with an ender 3 can I make all the pieces you use in this video?

@amstudioprojects 4 года назад

Yes

@chbetz 6 лет назад

hey @amstudio! what size is the biggest part to be printed for completing this steering wheel? I'd plan to get the files and use my Anet A8 which has printing dimension of 22x22x24 cms but I expect it's a bit too small for the task, am I right or wrong? Thank you in advance and keep it up with those amazing works!

@amstudioprojects 6 лет назад

The biggest part will easily fit on the A8.

@vrtmorvic2652 6 лет назад

Does the FFB remain unchanged with the adapter or is it slightly tamed?

@gasixteenb11 4 года назад

1. how much will it cost to have a replacement for g29. 2. is it possible for you to make a complete wheel base with internal replaceable cooling fans compatible with ps4/ps5?

@stunttijoona7897 5 лет назад

Do you know if its possible to mount usb handbrake to fanatec table mount without any extra holes

@MarcelloPasquazzo 4 года назад

HI! I bouth this great steering wheel, but I need to install it on a T300. It's possibnle to have the Trhustmaster connetcion design to be printed?

@HechoEnMexico10 4 года назад

If you go on thingiverse there are a few adapters for the t300 that you can print. It looks like you could just replace the Logitech quick release adapter with a t300 one.

@FlaxnexX 4 года назад

Im little kit and ı dont have 3d pribter but ı want do 3d models what is your 3d print program?

@motorsgamers 4 года назад

Hello what is the best type of 3D printer for wheel ?

@LuigiHack 6 лет назад

Loveeeeeeeeeeeeeee this is so cool ❤️

@amstudioprojects 6 лет назад

Thanks!

@jesperfalkenstrom4467 6 лет назад

Hey @AMSTUDIO, again you amaze me with your DIY projects. I am trying to find out how much this will cost to make. So my question is: how much PLA did you use to print this wheel? Is 1 KG enough?

@amstudioprojects 6 лет назад

Thanks, yeah 1kg is plenty. It uses a bit less than half a roll.

@croppingchimp1521 2 года назад

What 3d printer do you use?

@Pascalleke_ 4 года назад

Link of heat shrink?

@milesgti 4 года назад

My budy has a thrust master tmx. Would this design mesh with that wheel?

@MLeitao 5 лет назад

Hi, thanks for your videos, what is the size of the wheel?

@dertodestoaster1509 5 лет назад

Is it possible to use the LED segment display at 2:55 upside down, so the Shift leds are at the top? Can you adjust the software accordingly?

@amstudioprojects 5 лет назад

Yes that will work, display can be inverted in software

@dertodestoaster1509 5 лет назад

@@amstudioprojects thanks for the quick answer. Love your videos and your creativity! Keep it up!

@karstthomson4723 3 года назад

What were your printer settings? Im using the Ender 3 Pro but not sure on how much infill to use.

@DeepOf 4 года назад

what Resolution you did ???

@pirozcontractor6006 5 лет назад

Also I've finally finished your sequential shifter build, anyone suggest how to mount it???

@mauroburroni9013 5 лет назад

hi , do you have a setup for pc ?? and a wiring diagram ??

@hersashimi 4 года назад

Do you have to program the buttons for them to work?

@TotoWolffJr 4 месяца назад

app for 3d printing ?

@AsiBitton 3 года назад

I am disabled using hand control for the gas/brake. Do you have steering wheel with shifters and gas/brake (clutches like)?

@Simlife101 5 лет назад

Hi amstudio I'm considering making this rim. I use a 20nm mige motor direct drive wheel. Would you say it is strong enough for that or any advice to make it so. Any help would be greatly appreciated. Amazing work as always

@cooldinho8141 5 лет назад

How many switches can you attach to the encoder?

@UncleUrgant 6 лет назад

how to make buttons and display work simultaneously on one cable?

@playmaker5601 6 лет назад

Use an Arduino

@UncleUrgant 6 лет назад

I know I need to use Arduino. But the question is how to connect? In order to activate the buttons, pro micro is required. What would work nextion display requires a USB-UART Converter, or nano. But how to use buttons and display from one Arduino?? Other than a way to set up a USB HUB, I don't know anymore