How To Make a Cutting Board | DIY Chevron Cutting Board 

Beautiful!!!

The wood dust with glue mixture for a filler is a really cool trick . Thanks for sharing

My breakers use to trip too. I had an electrician come and put in dedicated breakers for my power tools on each side of my garage. Awesome board

Nice job👍

Great job I have the same issue you have with blowing breakers. If I use my air compressor, I have to unplug everything. But you do what you want to do. I am considering buying a generator. and see if that helps.

Awesome looking board matey, you really see the 3D effect as you look at it.

Good job

Great looking board.

Your board turned out gorgeous! Thanks for sharing!

NIce job! I'm trying this soon.

Beautiful cutting board! Love the pencil tip and all the other tips you give

very nice

Love the design. Thanks

Great video. Thanks for sharing. I’d love to see how you have your small shop set up. I too work in a garage!

Beautiful!💞

Good job very informative and entertaining....glad I am not the only one that blows breakers! Would like to see planer and table saw sleds video

Lol you need to upgrade your power situation. Solid tips and a great looking board. Good job man 👍

Great Wood color contrast.... ladies gonna hate putting the 1st cut marks on those beauties.

Love yr work. It really turned out beautiful

Gran trabajo saludos desde Uruguay

You are very talented

Uma perfeição de peça show 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

May I suggest a rip-cutting blade with fewer teeth? I was using the wrong blade for a while which worked fine on softer woods like Walnut but I ended up locking up my table saw and blowing the breaker on a few occasions cutting harder woods like Maple. I switched out to the Diablo 24 tooth rip cutting blade and haven't had any issues since while cutting harder woods like Maple and Purpleheart. I'm still getting really smooth, perfect cuts and the blade is actually cheaper than the blades with more teeth.

Great tips and beautiful board, Jordz! I am interested in the planer jig. Any sniping or tear out concerns vs a drum sander?

Absolutely beautiful board.👍👍 I subbed.

🔥🔥🔥

Beautiful cutting boards. I saw you touch up the plank with sanding and glue. It is better to do this with a clear coat, which will not stain if you put the plank in oil.

Beautiful cutting board, thx for sharing

Trabalho magnífico simplesmente lindo Poderia passar as medidas por favor obrigado.🇧🇷🇧🇷🇧🇷🇧🇷

Beautiful board! Breaker bloiwing kindred spirit here. Questions if you will: 1) Were you nervous about running the board through the planer cross grain (it scares me and I have no drum sander); and 2) No sliding mitre saw here. Could i use the sled/plywood trick to cut the board ends square when cutting it to final length? I appreciate you and the step by step video. That is one very beautiful board.

599 subscribers. Let’s make it 600 .

nice board, in the future you should probably use titebond 3, its food safe and waterproof.

Beautiful board! What was the length of the pieces in the original glue up? Also, what did the combined width end up being for the initial glue up?

Great job man! That selection of boards really pops. I've made a few standard boards and will be making this one soon. Practically every glue up I've done the board is not flat so I have to do exactly what you did to flatten it after glue up. Can you tell me what length you cut boards to? I have the Dewalt 13" planer and want to ensure after glue up I'm not too wide to run it through the planer. TIA

Very nice cutting board. Question, on your second glue up, it appears that you glued up end-grain to end-grain (sort of). Any concerns with this glue up eventually failing?

Do you know what angle you used at that first glue-up when you were lining them up with your square? Thanks.

Could you help me figure out how long the pieces have to be to make a 24 inch long by 16 inch wide cutting board just like the one you did. Thank you

Where did you get you branding iron? Beautiful board.

Very beautiful cutting board. Can you tell me how long the individual pieces of your wood were?

Did i heard it wrong,or u said u use Olive oil? Great work tho.. Big fan

Really great video bro. Well shot, easy to follow. Great work. I'll give you a /sub for that.

Liked and subscribed ;)

Jesus te ama parabéns pelo trabalho ótimo ótimo mesmo parabéns muito bacana mesmo ótimo trabalho belíssimo

😅❤😊

surely the stop on your sled should be on the other end as the blades cut against the stop ?????

Where did u get yr logo stamp?

How did you make the jig grove

Good job