Тёмный

How To Make A Fancy Nylon Stockwhip 

NicksWhipShop
Подписаться 63 тыс.
Просмотров 15 тыс.
50% 1

Hello friends, in this video I’ll be showing you how I made this 5ft fancy nylon stockwhip, and how you can make one too! As always, it’s important to state that I am not by any means claiming that this is the only way to make a fancy plaited stockwhip. Instead, this is a method that has worked well for me, and that I’d like to share with you. Modifications and alternative methods that you find work better for you are always encouraged, so if you feel like there is a better material/method anywhere throughout the build, please let me know in the comments. The handle and the thong of this whip will be plaited with Whipmaker’s Cord. The handle is 18 plait, and the thong is 16 plait.
The process of filming this tutorial has been by far the most challenging production that I have ever created for this channel, and I have done my very best to film in detail, every step to the best of my ability. Although this project is quite involved compared to others on the channel, don’t let it scare you! I’ll be building the entire whip right along with you in real time. All tools and materials needed to build this whip are listed below. In addition, I am excited to announce that I am giving away the final prototype that I made while designing this whip, and all you have to do to be entered to win is… 1. LIKE THE VIDEO and 2. LEAVE A COMMENT. Complete those two steps, and you will be entered into the drawing. All countries are eligible in this international give-away, and I will be drawing names in exactly one month. If you feel that these videos are helpful to you, your support is greatly appreciated and allows me to continue making them. You can support my channel here ► www.paypal.com.... I’m glad you’re here! Sit back, relax, grab your supplies, and join me on this whipmaking adventure!
-----
Use This Link For The Handle Pattern Guide ► www.whipinfo.co...
Use This Link For The Thong Pattern Guide ►www.whipinfo.co...
--------
:::You will need the following paracord to complete this project:::
233ft Of Whipmakers Cord
39ft Of 550 Paracord
6ft of type #1 Paracord
Purchase your different cords with the links below
--------
MATERIALS
2-Part Epoxy ► amzn.to/3sKZjSm
120 Grit Sand Paper ► amzn.to/3Z8WB54
Brown Packing Paper ► amzn.to/3Zd04Q7
Spray Adhesive ► amzn.to/3rdJK53
Artificial Sinew ► amzn.to/44LAhQ6
Hockey Tape ► amzn.to/45Xdn9w
Whipmaker’s Cord (USA) ► theparacordsto...
Whipmaker’s Cord (outside USA) ► www.boredparac...
1/32in Lead Sheet ► amzn.to/3Rfea1G
1in Round Aluminum Disk ► amzn.to/3PvNmJe
Ball Chain For Core ► amzn.to/3sKoLr1
Neoprene Rubber to help Roll Whip ► amzn.to/45IU8AP
Parafin Wax ► amzn.to/3Z83Ie4
550 & Type 1 Parachute Cord ► theparacordsto...
5/16in (8mm) Driveway Fiberglass Stake ► amzn.to/3Rg8io... String Great For Crackers ► amzn.to/3Rb0DrK
Electrical Tape ► amzn.to/3sS915b
-----
TOOLS
Custom Metal Stamp for Metal Stamping ►amzn.to/488CHv0
Numbered Metal Stamps ► amzn.to/465ipRB
Utility Knife ► amzn.to/3PvhpAA
Tape Measure ► amzn.to/3PtKk85
Caliper ► amzn.to/460qLcV
Lighter ► amzn.to/488DeNw
Scissors ► amzn.to/45X8nSZ
Stapler ► amzn.to/3Rery6a
Small Hammar ► amzn.to/45ZCkRM
Tin Snips ► amzn.to/3P5F617
Portable Vice/Clamp ► amzn.to/45UnXOQ
Torkey Roaster For Heating Wax ► amzn.to/3Z5KXYR
Paracord Lacing Needle ► amzn.to/44IeZmK
Fid ► amzn.to/3sQ18gC
Hemostats ► amzn.to/3Z7o8DW
Thermometer For Checking Wax Temperature ► amzn.to/3EvVliV
Hack Saw ► amzn.to/44NBiax
Metal Yard Stick ► amzn.to/3Zc8CGT

Опубликовано:

 

8 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 211   
@Bleiz39
@Bleiz39 Год назад
great job ! hope to win cause i won't be able to do it for now XD
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Congratulations @Bleiz39! You won the drawing for the stockwhip give-away!
@Bleiz39
@Bleiz39 11 месяцев назад
@@NicksWhipShop woooo ! seriously !? I can't belive it... thank you so much !
@rafewoodin4329
@rafewoodin4329 Год назад
I remember making my first 6ft whip with your tutorial when I was in the 6th grade and it’s super nice to see how far your channel has come.
@yep537
@yep537 11 месяцев назад
Same here bro, exactly the same
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thank you both very much!
@davidlazar2410
@davidlazar2410 Год назад
I've followed a lot of your tutorials and made most of your whips. My all time favorite is the electrical tape and BB one. That thing EXPLODES when it cracks. Very underrated method IMO. Seriously, use Scotch 33+. It would work much better than that brown paper glued to that handle.
@neuroticlynx
@neuroticlynx 11 месяцев назад
It finally clicked for me who your videos remind me of: Nick, you are a modern day Bob Ross. Not only is it incredibly relaxing to watch you work, and your voice is so soothing, but it's really the fact that you are always so positive and encouraging to beginners that reminds me of him so much. Thank you for your amazing work!
@mosfet51
@mosfet51 Год назад
I've been using your videos and teachings to make myself a better whip maker. My custom handles are proof of that. Thank you Nick.
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thank you brother!
@jwen642
@jwen642 3 месяца назад
Thanks a million Nick, keep it up. I’ve learned so much from you about the whip world, both utilization and creation, and produced a few nice whips.
@CaffeinatedAcrobat
@CaffeinatedAcrobat Год назад
Awesome video as always! Full plait stocks have been my favourites for a bit now so it was great to see your take on them!
@badbaker378
@badbaker378 Год назад
I’ve followed you for a few years now and following your guides I’ve successfully created and sold some whips. Very much appreciate your presentation style.
@bigxxdrummer2527
@bigxxdrummer2527 Год назад
I remember the first build video I watched from you it was how to make a bullwhip. I got the stuff as quick as I could and started and now I'm growing as a whipmaker. Thank you Nick!!!
@davidquiram7339
@davidquiram7339 Год назад
Both your construction methods and your video production have changed so much over the years! Thank you for helping me become a better paracord crafter and novice whip maker.
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thanks so much for watching!
@anderdubosq6462
@anderdubosq6462 11 месяцев назад
You make it seem so easy to make this but it would take me at least 10 hours to build this whip. Great build.
@wolflord888
@wolflord888 Год назад
Awesome tutorial, thanks a lot. I've recently been at that gasometer in oberhausen, and asked if they would mind if I crack my whip in there and it was totally ok for them. They told me about your time there and were still in awe of that special moment of the very first crack.
@patrickrussell2416
@patrickrussell2416 2 месяца назад
I have watched many of your video’s and you are really something when it cones ti making whips
@vanessaOnYoutube
@vanessaOnYoutube Год назад
Thanks for making this! Definitely makes me want to try giving fancy plaiting a go.
@Mr194911
@Mr194911 11 месяцев назад
Always look forward to seeing your videos I have been watching for years and you are the reason I have been making Whips’s for years now I have made some where around 50 whips and walking sticks with plaited handles.
@isaacconcepcion4783
@isaacconcepcion4783 Год назад
I love these videos, if it weren't for them I would never have been able to build my replica of Indiana Jones bullwhip thanks for inspiring
@chrisgriffith1573
@chrisgriffith1573 Год назад
Glad to see your post... been a long time. EDIT: I washed my hands thoroughly after just watching this video...
@019520
@019520 10 месяцев назад
Can’t wait to build one of these whips.
@eliotswett6608
@eliotswett6608 Год назад
The first whip I ever made was from an instructibles article and it was so bad but was enough to really get me into whip making. Next stop was your channel and I watch them all. Mostly make snake and bull whips but I may just have to do this for my next project. Thank you for all you have done for the community.
@ivankrustev2031
@ivankrustev2031 Год назад
Thanks for introducing me to the world of whips and for the great videos!
@user-uo3pb3rr4f
@user-uo3pb3rr4f 6 месяцев назад
thank you for the time and effort spent. i am fascinated by it, and could probably build along without much trouble. that you've left out no detail is very encouraging. i will begin gathering the materials. silly for me to not have a single whip when i have the skilllset from my other braiding to help me along.
@alyssumiris2102
@alyssumiris2102 11 месяцев назад
The fade from handle to pattern sheet was such a good transition!
@CoolKids-cz2pr
@CoolKids-cz2pr 10 месяцев назад
Nick! We need you to come back down to Florida. The lizards are thick! - the family.
@benjaminesmeyer6091
@benjaminesmeyer6091 11 месяцев назад
I like watching your videos on whip making
@nicholasdavis9849
@nicholasdavis9849 Год назад
I don’t think I’ve ever actually wanted to sit down and watch a 4.5 hour video. I would like to make all the whips you’ve shown, but my wallet always seems to protest. Nice job Nick.
@gjkymsafishing45
@gjkymsafishing45 Год назад
thank you for the vid. everything I know about whipmaking, I learned from you. Thank you
@CanadaWhips
@CanadaWhips Год назад
Incredible work Nick!! Thank you so much for your dedication to our community and for always sharing your knowledge. We are very lucky to have you!
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thank you Justin! As soon as I get my passport renewed I'm coming up to visit you guys.
@CanadaWhips
@CanadaWhips 11 месяцев назад
@@NicksWhipShop Our guest room is always open man. Come by any time!
@zazaheem2013
@zazaheem2013 Год назад
This is the best tutorial I've seen yet for new whip makers like me hands down! Truly am thankful that you do all of this work and share it for free. Keep up the good work👍
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thanks so much!
@telldpablo
@telldpablo Год назад
Loving it! Really been enjoying building along with you the last few years. Even been able to share and sell a few to my co-workers. The one young guy just used it on his family’s cattle drive on the past weekend. Said he just loved it. And impressed his grandfather who used to drive the cattle using a whip. Thanks again Nick!
@darrellejeune6785
@darrellejeune6785 Год назад
I did my first whip watching your videos
@isaacmitchell4368
@isaacmitchell4368 Год назад
All Nicks videos are great tutorials. I’ve made plenty of whips using his methods and always turn out great results
@stephenclark4114
@stephenclark4114 Год назад
I haven't made a stockwhip for ages. Thanks for the inspiration!
@TheBRADMONJE
@TheBRADMONJE 11 месяцев назад
Thanks for all of the great videos that you make Nick.
@stevejackson6439
@stevejackson6439 Год назад
I really enjoy watching your vids I’ve already made a couple whips myself , the only problem listening to you speak is so relaxing I fall to sleep while watching so this video will take me hours to watch 😊
@aussiesonik523
@aussiesonik523 11 месяцев назад
Keep creating Nick, love seeing new ideas.
@jaym6887
@jaym6887 Год назад
That is super cool. I am going to give this a go this winter. Thanks for the awesome video.
@reeannehill7016
@reeannehill7016 Год назад
Thank you for doing videos like this.
@gordonnielson7059
@gordonnielson7059 8 месяцев назад
Reminds me of the great Bernie46’s videos. Even down to the table!
@mosfet51
@mosfet51 Год назад
Schell Silverstein, Cricket in Times Square. You are an old soul. You're also a good egg.
@user-tj9cx1bs8w
@user-tj9cx1bs8w Год назад
Inspiration. Most of the builds are long BUT I LOVE how we can build together. I
@wolfy4753
@wolfy4753 11 месяцев назад
love your videos, I have used some of your bullwhip and snakewhip tutorials to help me make some of my own whips but i was never drawn to stockwhips until i saw this tutorial and now im interested in giving them a go =) love from the uk
@ruthkaiser6168
@ruthkaiser6168 Год назад
Very nice whip. You're a very good teacher. 😊
@malt2380
@malt2380 Год назад
I would've commented even if there wasn't a giveaway. This whip is beautiful. I think the "paper-taper" is brilliant! lol I haven't gotten my hands on some whip maker chord yet, but I hope to sometime, hopefully soon. Thanks so much for these tutorials!
@dougbridgeman1024
@dougbridgeman1024 11 месяцев назад
Man everyone thinks i'm nuts watching a 4.5 hr vid making a whip😂😂😂. Love it, thanks for all the entertainment and knowledge. Sure hope to be able to try that whip in person. Cheers from Calgary AB
@mh2525
@mh2525 Год назад
I have wanted one of your whips for a long time, and I have wanted a stock whip for even longer. This seem a perfect win win!
@QsWhips
@QsWhips Год назад
Nick, I appreciate you for taking the time to share whipmaking knowledge. Your channel was is one that I reference most when I make my own. Friends liked the ones I made and I was asked to make more to sell to them, I’ve sold 20+ so far and have gotten pretty good in-person review from Adam Winrich when I met him at Texas Renaissance Faire. This boosted my confidence to create my own small business. I’m excited for the future! Thank you and all the whip maker communities so much! Sincerely, Eric Q
@joshparks6947
@joshparks6947 11 месяцев назад
I love watching your videos.
@amberanthony883
@amberanthony883 Год назад
What an amazing craft. Thanks for the ‘lessons’
@randomstranger622
@randomstranger622 Год назад
Everytime I get a notification that you have a new video, I get super excited as a fellow whipmaker, whip enthusiast and as someone who loves making videos
@zackinsko5416
@zackinsko5416 Год назад
Awesome videos, I was able to follow another video of yours and created a beautiful whip for my first time!
@hectorrobles467
@hectorrobles467 Год назад
❤❤❤❤ with popcorn expecting this
@Christ_died_for_your_sins_777.
I know an alternative to that paper-wrap. You can take artificial sinew or waxed lacing tape and spiral it closely together (closed-loop binding) so it adds more stifness to the rod and will have a more pronounced taper after adding the paracord layers
@CalebRosa-qb2qy
@CalebRosa-qb2qy 5 месяцев назад
He doesnt do ASMR, but I got tingles when he started cutting the fiberglass.
@MeowDeLeon
@MeowDeLeon 5 месяцев назад
Showing me the website was worth the sub. Keep going on!
@fishheadH2o
@fishheadH2o Год назад
You sparked my 550 cord making since your day in the garage, making the Snake whip! Love the videos. keep them coming.
@spencermerrell2600
@spencermerrell2600 Год назад
This haves to be the coolest thing! Just watched a whip live stream while me and some other people were talking about what you have been up to in the past while, you showed up on the stream to apart of an awesome experience. To make it even better, I had a feeling to check your RU-vid channel and I see my dream tutorial waiting😁 Now that’s what I call a day made in Heaven
@Desert.Sagebrush.
@Desert.Sagebrush. Год назад
You're right about changing from a high plait count to a lower. It's just the time struggling with the high plait count. Lol. But hey, it's good prep for doing even higher plait counts.
@HTLewis
@HTLewis Год назад
Thank you Nick. Had a great time plaiting a whip while watching another great tutorial from the person who inspired me to start whip making ( thats you Nick ). Don't worry how long the videos are. I'll always watch them. You have a calm nature and a great honesty to mistakes, which we all make. Thanks again Nick
@ducklord4947
@ducklord4947 Год назад
So many of the whips I've built have been made alongside you, my last was the mini bull which my 8yo cracks like a champion. I can't wait to join you on this next journey. Thank you for all you give to the community ❤
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thanks so much!
@ethancraft6017
@ethancraft6017 11 месяцев назад
Thank you for all the tutorials, help, and advice over the years! I’ve been making whips with your help since your original bullwhip and snake whip videos!
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thank you for watching!
@michaelsparks5179
@michaelsparks5179 Год назад
Thanks for the content Nick! You videos are where I learned how to make whips. I used a number of your techniques to this day!
@bjornlange7483
@bjornlange7483 11 месяцев назад
Your tutorials are an absolute joy to watch! They really helped me with building whips myself. Currently I am working on a mini bullwhip with an English eye based on your mini bullwhip tutorial.
@shiro2730
@shiro2730 Год назад
Hello from Germany, I love your work and your videos. You inspired me to Bild, my own whip.
@jackgardener2531
@jackgardener2531 Год назад
Thank you for so many incredible videos, you’re one of the best of the best 👍
@TwistedPadre
@TwistedPadre Год назад
Your videos are inspiring.
@niklasdeeg8560
@niklasdeeg8560 Год назад
Love your work! Already made a few bullwhips myself following your tutorials. Greetings from germany!
@thronson87
@thronson87 Год назад
Well done Nick!
@ernietorres502
@ernietorres502 Год назад
Triple A... Awesome, As, Always.
@flytelaw1
@flytelaw1 Год назад
Brother, you know I am 100% your supporter….cheers, Chris🥂👍✈️
@malranarv
@malranarv Год назад
I made my first whip "Stumpy" from your 2018 snakewhip tutorial during the lockdown in 2020. I have made a lot of bullwhips and snakewhips since then (all with your guidance), but Stumpy is still my favourite. Not only are you a good teacher, but your video production values are very high. I salute you for paying particular attention to sound quality. There are so many other videos out there which are unwatchable due to the poor quality of their audio.
@lpwhips
@lpwhips 11 месяцев назад
I've been following your videos for a while now and this is another great tutorial! Hopefully I'll get a chance to make a stockwhip like this sometime soon.
@KMD_Whip
@KMD_Whip Год назад
Learned so much from your Videos and always love your calm and clear Explanations. Still got my first Snake Whip I made with your help. Thank you for everything you taught me and others.
@D18Kyoya
@D18Kyoya Год назад
Hello, Nick. Thank you for all the tutorials been watching your videos for years now.
@YoungBlood3462
@YoungBlood3462 10 месяцев назад
Thank you for teaching me how to make the whips ❤❤❤ From James youngblood in Colfax Louisiana
@stephaneacker6719
@stephaneacker6719 7 месяцев назад
Awesome job From Alsace, France, i watch you since 2017.
@daltonvilcins2650
@daltonvilcins2650 Год назад
🎉🎉🎉 so excited to make this. Love your work Nick!
@Indominuswhips
@Indominuswhips Год назад
Awesome. That'll be next on my list to try out. Thanks for all the inspiration, Nick. You've made it so many times already to help me through depressive "I don't wanna do anything"-phases and helped me to get my ass up and plaiting again. Thanks for that. All the best.
@dasMoto
@dasMoto Год назад
You inspired me into whip making, and I would love to have your whip on my wall to motivate me even more. Good that you are back!
@joehicks1930
@joehicks1930 Год назад
Thank you for sharing your knowledge.
@camelusdromedarius6443
@camelusdromedarius6443 Год назад
Just made my first actual whip from your hybrid performance whip tutorial from 2 years ago, cracks great.
@bushrob411
@bushrob411 11 месяцев назад
Amazing video tutorial as always! Such a beautiful stock whip
@toughtrucksoftx
@toughtrucksoftx 11 месяцев назад
Love the content. Started my own whip build watching your tutorials.
@OlavVittfarne
@OlavVittfarne 11 месяцев назад
Great video as usual. They are very inspiring and soothing. Keep up the good work.
@Indominuswhips
@Indominuswhips Год назад
Just had to laugh..."I DO hate to waste glue." - I feel you so much right there. Also just hate it. Happens every time.
@user-me5bc3wu6v
@user-me5bc3wu6v Год назад
I'm in Tasmania and I really enjoy watching your videos,I have made all my whips based off your videos, only change is I used a piece of double sided Velcro to keep my belly strands together instead of tape, will certainly be trying this one out thanks nick
@ChristianPsencik
@ChristianPsencik 8 месяцев назад
EPIC video man. Well done. Tons of great information throughout Thank you as always
@_I_Got_This_
@_I_Got_This_ Год назад
Awesome build! I just finished my first paracord bullwhip with the help of your tutorials. I believe I have watched most of your videos at least once. Thanks for taking the time to continue with the channel, you're a great instructor.
@NicksWhipShop
@NicksWhipShop 11 месяцев назад
Thank you!
@jirkaj.4915
@jirkaj.4915 Год назад
Great job Nick!!
@Mustang-qk8zs
@Mustang-qk8zs Год назад
I have be waiting on this. Awesome work
@notasheeprepublican.-co4uo
@notasheeprepublican.-co4uo 11 месяцев назад
Very nice whip. Well done.
@michaelbabcock3670
@michaelbabcock3670 Год назад
Long time viewer, it's been awesome to watch your journey!
@phoenix0787
@phoenix0787 Год назад
Thank you very much! When I started building bullwhips in 2020, I came across your videos and they have helped me tremendously. And I'm pretty sure this video will help me build my first stockwhip. Keep up the good work
@nachtlust6129
@nachtlust6129 Год назад
I really love your tutorials, I've made since 2021, three ones that I use for duelling and cracking. It's such an underrated tool. Love your stuff, keep it up. 😊
@degenerate579
@degenerate579 Год назад
Another great tutorial Nick! Keep up the good work!
@perfiltenborg9995
@perfiltenborg9995 Год назад
That stockwhip looks awesome..thanks for sharing all the details ❤
@ronaldwoodhouse7262
@ronaldwoodhouse7262 11 месяцев назад
I have made a few whips in my life but all leather. Used them alot here in Australia for stock work.
@vickydunn1615
@vickydunn1615 11 месяцев назад
Appreciate the time and work you put into these. Very helpful to have your input as well as the science you bring to your work.
@bilharzwoodworks
@bilharzwoodworks Год назад
Hey Nick! Greetings from central Iowa...making an 8ft whip with a black and white whipmakers cord overlay with a checkerboard handle all while watching!
@random40s
@random40s 11 месяцев назад
Always so cool to see your videos! 👍 👍
@TheNutteloos
@TheNutteloos 11 месяцев назад
these are awesome, im looking to make some kind of microwhip using 750typeIV as core then some 3mm coreless as belly, thanks for these videos it helps a lot with practicing the separate stages of the whip making
Далее
POV: Your kids ask to play the claw machine
00:20
Просмотров 9 млн
The many Different Materials for Whips
14:10
Просмотров 21 тыс.
Bullwhip vs Stockwhip, which is the best?
15:01
Просмотров 112 тыс.
What's the Best Length for a Beginner Whip Cracker?
14:13
How to Plan Out Strand Lengths For a Bullwhip
19:34
Просмотров 7 тыс.
POV: Your kids ask to play the claw machine
00:20
Просмотров 9 млн