How to make a globe knot mandrel 

Mark make a video on how to use the mandrel. I loved the video, as usual clear and concise.

The same method can be applied to a Turks head mandrel as well thank you so much for these videos one of my favorite RU-vidrs thank you for all that you have taught me

This is so simple yet one of the coolest things I've seen all day. Thanks bro!!!

Excellent Video Marco, its given me a great guide line into making this mandrel, Thankyou..

Clear directions appreciated. Thankyou.

Excellent tutorial! Thanks for showing the procedure. Looking forward to the knotting.

Those are called “brad point” drill bits. Another time saver would be to clamp a piece of wood at least half the thickness of the pipe to the drill press table. Measure from the drill point over half the diameter of the pipe and place the edge of the wood there when you clamp it. When you drill through the top of the pipe, just keep going and drill the opposite side at the same time, then slide the pipe forward to the next hole and repeat, etc.. If you are making multiple mandrels, screw the piece of wood to a piece of plywood and mark a line squared off of the first board, and mark a location on that line for a hole half the diameter of the pipe from the edge of board 1. You can use that hole to locate the jig on your drill press table, then using the first line as the starting point, mark on the plywood where the end of the pipe will be for drilling each hole. Takes much longer to explain than it does to do, but it’s a huge timesaver because all you have to mark on the pipe is two lines showing the centerlines of two rows! Great video!

This video is one of the most interesting that i have seen on this subject. Before this i have used cardboard tubes and paper pins but this will be a lot more durable. Thanks a lot Mark

This is fantastically clever. Thanks!

Hi Mark. Thank You.

Please make more videos of different knots to make with this mandrel!!

Very nice tutorial Marko..

Wuauu!!! que genial 👌👌fantastico muchas gracias por enseñarnos👍👍😉😉

Fold the pinky paper in half and half again. The three bend lines and the join will be the four equidistant points you want.

I think I'll stick to my Pringles can, but well done video, as always. Love you, Marko! ❤

Very Nice

the diameter of the 25mm PVC pipe is inside or outside

Hello Sir, very smart, Thank You very much for sharing ^_^

Hi,please can make a tutorial on how to use this for globe knot ?

Make the wood into a template so you don't have to keep measuring (If your making more than one)? Just transfer marks on the wood to the pipe?

Hi, Good morning, What is the size of the screws? length and diameter? pls!

What the size of the scrolls & the pipe please?..

Waoooow

How can I buy these tools?

Oioioi! Drill bit is bent quite a bit... Looking forward to the second part explaining how to use it..

Nicely done and useful. Just one critique. "Mark" is obviously not a native English speaker, and he continually uses the term "opposite" when he should say "parallel". Once you adapt to this quirk in his speech understanding what he is doing goes much easier.

Ummmm...graph paper?

First

You say 3/8" but you were measuring centimetres. Don't pander to the Yanks! 8-) A metal saw is a bit of overkill for PVC. My local hardware store has ratcheting PVC pipe cutters that do the trick much more cleanly than a saw.

😎🫶🏾

что это и зачем?