How To Make A Mini Bar From Jerry Can

Подписаться 803 тыс.

Просмотров 3,4 млн

50% 1

In this video I'll be making a mini bar from Jerry can.
I made a mini bar, but the same concept could be used to make storage for anything. All you need is to work on different shelving design.
Rubber Seal 3m: goo.gl/ryXLwD
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

Хобби

Опубликовано:

8 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@Jacobtaylor1775 6 лет назад

The cardboard on the back to prevent scuffing shows your dedication to a quality product!! Awesome!

@muddyfences5559 6 лет назад

Not only is that very cool, I commend your attention to detail. Very clean.

@HTMLguruLady2 6 лет назад

Muddy Fences I completely agree. His eye for detail was amazing.

@Laffy1345 6 лет назад

Muddy Fences we call the spouts donkey dicks. ..😂😂😂 Donkey! !

@Jafmanz 5 лет назад

It is most certainly not cool.... thats why its shit!

@MrBjhuddz 5 лет назад

Muddy Fences you are a god

@diycreationsvet4878 3 года назад

@@MrBjhuddz This is so engineered... i build 2 Customize Whiskey dispenser whit epoxy, wood, shell casings and other things..

@joejarrell2578 4 года назад

I wonder who the 1.5 thousand folks are that disliked this video...even if you don't drink, how could you dislike this gentleman's creativity and attention to detail?

@wardmcdermott923 5 лет назад

One of the best RU-vid videos I've seen. Great job, I too enjoyed your attention to detail...

@shadowr2d2 6 лет назад

Awesomeness Hands Down.. Not Only Is This A Great DYI Idea.. But A Great Gift For Someone.. You Sir Have A New Subscriber Now.. Keep Up The Great Work..

@jrodz9042 5 лет назад

Amazing job.They will make a great gift

@andythurlow1614 5 лет назад

As Muddy Fences said, so cool and attention to detail. No one could have said it better. Beautiful and so creative. X

@fritziskunterbunteschaos9173 5 лет назад

Wonderful work. It's a pleasure watching you work. Your attention to detail and your professional, clean way to work is amazing. I just wished you'd still these. It would be just the gift for my husband.

@markohynninen2553 6 лет назад

Good video. Here in Finland we just fill up that Jerry can with the pure KOSKENKORVA !

@manickn6819 6 лет назад

Nice clean build. I like it.

@VC27 5 лет назад

Immaculate build. You have made it all seem so easy. Thank you.

@kenkeating299 4 года назад

Great video. I love how clean and organized you work.

@danieldowning4583 6 лет назад

This is a fantastic build. Just sub'd your channel. I love your work. You should open an Etsy Store, you would make a good living selling you wares.

@AxelPLUSYotsu 6 лет назад

Wow nice work if you can share the interior schematics just be great!!

@kerrygibbs8198 3 года назад

Great product!! You did a fantastic job showing and telling us how to build it. Thanks.

@joeguilfoyle1922 5 лет назад

This is brilliant. I wish I was creative enough to think of other stuff to store inside the Jerry Can.

@MCsCreations 6 лет назад

Man, fantastic job. But it would be even more fantastic if you've made a mini fridge with it. Using a peltier module. ;)

@lordthomastravis1617 5 лет назад

MC's Creations cool as fuck dude

@isaaclyonsf1 5 лет назад

I'm doing just that!

@Shack-lion 6 лет назад

Looks hella professional

@kayeleva9006 6 лет назад

max get the screw driver

@kevinbarriger8215 3 года назад

I really admire your great amount of craftsmanship.

@Breizh-li8fh 6 лет назад

A great job from a genuine craftsman.

@Somalvlogs13 6 лет назад

Really Awesome

@Generalenlars 6 лет назад

Punjabi Malaysia t o

@TheHardwareguide 6 лет назад

Nice! BTW you could utilize that wasted space at the top, right below the handle by fitting a tiny 12v Peltier converter and turn that thing into a mini fridge.

@manickn6819 6 лет назад

Could be his stash for other items. Accessible from the lid.

@zanpekosak2383 6 лет назад

Manick N Other items hmn?😎 *cough* weed *cough*

@manickn6819 6 лет назад

BeGamerSl yeah I was thinking along those lines......

@pascalott4558 6 лет назад

Manick N i was thinking some kind of sleeping drugs to pour into a girls drink

@a.naydenov99 6 лет назад

I made almost the same can but in mine i put 12v battery from old electric tool and LED lights with the switch in the cap. Also in the cap was a charging hole.

@TheMacabreGamer 5 лет назад

I'm really impressed looks so professional

@feketekrisztian1897 6 лет назад

Very good idea and amazing finish! Professional work! Congratulations for you! Thanks the upload!

@DB-rw5vu 6 лет назад

Beautiful!. The one upgrade I can see, I'd glue green pool table felt on the inside walls of the glasses holders, and maybe the inside of the bottle shelf, too, to avoid scratches to the glasses, and to give a bit of cushion in case of impact.

@galli0 6 лет назад

D B alsobstain the wood 👌

@DB-rw5vu 6 лет назад

true, a nice rich mahogany, or a medium oak.

@0ff-Brand 6 лет назад

If no one can do it Jerrycan *sighs* I'm dead inside

@p3achy282 6 лет назад

... ... ...

@0ff-Brand 6 лет назад

By far my best comment

@lalle459 5 лет назад

i hate that game

@93BlazinFire 5 лет назад

Iron Fist That was good, heheh

@0ff-Brand 5 лет назад

sorry for late reply but thanks

@smokerjoe5231 6 лет назад

Wow ! Absolutely beautiful. Not my kind of stuffs at all, but your work is excellent. Nice and clean. You rock.

@ChevyBM 4 года назад

Just got all the stuff from the local hardware store, gonna build me one when i get to my ranch for the weekend! Thanks for the inspiring video :)

@itstrue2599 5 лет назад

That was very impressive great job!!!

@redshoestomp 6 лет назад

You can even use it to keep small bottles of gasoline. :+)

@yokysnigga9647 6 лет назад

If thats the purpose than you shouldn’t of done anything , and just used the original jerry can

@vivalabam7371 6 лет назад

^ o rly ngga

@alex46215 6 лет назад

CAPTAIN OBVIOUS IN DA HOUSE

@vivalabam7371 6 лет назад

he's joking, because you don't need a gas can to make a minibar, you need a minibar

@Trowo 6 лет назад

i see none understands the comment... the bottles of gasoline are for drinking.

@andrewmcphail1708 6 лет назад

Wow! Great job! Looks professional.

@scottward7813 4 года назад

This is a very clever idea and a job well done with great attention to detail! Very nice!

@ethanmartin7588 6 лет назад

Even though I’m only about 13, this was very cool. Great Job!!👍

@angoosemcmelon6917 6 лет назад

EthanzPlays Games, ayeee me to 👍

@yeet-dg7cg 5 лет назад

Ethan Plays Games 13club yee

@deveon3385 6 лет назад

Remember to empty it before u start grinding! xD

@EinarKramer 6 лет назад

If you cherish your eyebrows (or eyes and hands, for that sake), never use an angle grinder on a (used) gas can: It can blow up in your face! Not even washing with soap and water will help: Only cleaning with a steamer (pressure washer with heated water) will get rid of the very dangerous residual gasoline. Remember: A lot of gasoline is flammable. A little (vaporized) gasoline is explosive!

@simplemanduke7128 5 лет назад

You should sell these the off-roading Community would love them thank you for making this video keep it up

@pemtax557 6 лет назад

Really "Well Done" !! not only a clever idea, but well implemented. Thanks for sharing ...

@sarto7bellys 6 лет назад

Now, if that had been a bottle of gin and some cans of tonic I'd have made you an offer for it. Really good video, I have subscribed

@gidrogashich 4 года назад

Лучше просто, налить полную канистру вискаря)

@vBruhtiy 4 года назад

Its better for fill full canister of your fuel ;-)

@tim7up83 4 года назад

Пхпхпхпхпхпхахаха

@kamalkapoor6155 3 года назад

Truely amazing concept and really fine workmanship. Enjoyed watching the video!

@undertaker666dead 5 лет назад

This is one of the coolest idea I have ever seen.

@psyvild 6 лет назад

Where do you put the weed?

@TheRandog100 6 лет назад

use roundup

@RobDewLags 6 лет назад

That goes in the Nozzle

@AcidXprezZ 6 лет назад

RobDewLags that would be actually really smart. Great tip.

@antsbchill 5 лет назад

It's in the Coca-Cola safe can duh...

@zanpekosak2383 5 лет назад

You put it from the pouring spout on a small string.

@ncertus 6 лет назад

испортил хорошую канистру под спирт)))

@user-wg3mq1os6x 6 лет назад

ユラ это точно алкаш

@stepangulyaev2971 4 года назад

если бы пришел в гости с канистрой спирта было бы круче - улетнее)))

@mrcat6127 4 года назад

он еще и корчит из себя англоязычного

@freesaxon6835 6 лет назад

Neat work with that angle grinder!

@trizo1 Год назад

Hats off to you. Very well done. Your cut was so good that the door closed perfectly even with the rubber seals on both edges.. this was the part that I didn't get a perfect seem. I cut a mirror and glued it to the back and installed some LED lights on a sensor :) great job.

@russianmangogo 6 лет назад

Русский акцент

@user-mu5ww6lh3w 5 лет назад

Снято в России, русским, розетка на заднем фоне русская на 220 в)))

@qw5385 5 лет назад

Да мож и чехи какие, канистра внутри то окрашена была. А по-русски должна быть ржавой, т.к. краску спиздили

@danna140 4 года назад

Bitchin....sell me one , how $$ ?

@toreyyoung1518 6 лет назад

That's WAY cool! Maybe leather straps for bottle and glass. Beautiful work!

@jkukurugya 6 лет назад

That turned out sweet, great job.

@kinda.careless6835 6 лет назад

Make sure the tank is full of gas before cutting for the straightest cuts.

@EinarKramer 6 лет назад

I know you're joking, but you're right! A full can is less dangerous than an empty (used) gas can, since vapors explode more readily than liquids.

@zanpekosak2383 5 лет назад

Einar K Liquids actuakky dont burn. Only their vapours do.

@Nosurrender115 5 лет назад

Buy new. Or suffer the consequences 💀☠️😂

@slixcsgo4711 6 лет назад

can you make me one? would pay 200$

@thedriveasmr4125 5 лет назад

Buy angle grinder for $80, buy can for $20, wood, edging material, hardware for $15. Owning tools and educating yourself will give you pride in your work and save you money.

@JosephSManta 5 лет назад

@@thedriveasmr4125 I dare you to find even a Chinese knock-off Jerry Can with that type of spout for $20... LOL! Please post a link, if you do. While I do agree that a person should be reasonably handy, some people simply don't possess that kind of skill without injuring themselves in the process of attempting such a project... and I'd be the very last one to ever criticize someone for knowing and staying within their limitations.

@DaveDave65 5 лет назад

I totally agree with the comments below. Attention to detail is superb, explanations are clear & well thought out, the finished product looks great. All I need now are some tools & not to be intimidated by my 2 left hands. Thanks for this one, WDT :)

@1355Anthony 6 лет назад

So freaking cool. Great job. Very clean looking too.

@Eitan-eliraz 6 лет назад

Caution! Never cut with a disc saw A tank container of any kind was filled with flammable liquids, it could explode and hurt you. (From bitter experience ...)

@zanpekosak2383 5 лет назад

The damn thing is new. He said he bought a new one.

@user-gk4eu6hg5m 5 лет назад

Петли. Не покрасил в зеленый цвет

@WS85212 5 лет назад

You sir, are a GENIUS!!!!

@DevSwe 6 лет назад

That thing is awesome, great job. I don’t have the skills to make one, but I’d buy one in a second

@TheLordReverend 6 лет назад

Step one fill Jerry can w booze. Done.

@WojciechP915 6 лет назад

Nun Ya I like how you think

@alexnewton6840 6 лет назад

yea jerry can would hold a hell off a lot of whiskey just sayin :)

@leokrupp4442 6 лет назад

Just remember to mark which ones which or you could go from 90 proof to 93 octane.

@Ithrial420 6 лет назад

Are you Russian? your accent is telling me Russian but I'd rather ask then assume

@Johny19860208 6 лет назад

Lithuanian :)

@user-ow1df5wb7r 6 лет назад

It's definitely not a Russian master, ours do not work that way, it's not safe! The Russians will change the disc so that when they saw, the sparks fly forward, and the device moves back, and thus only newcomers work for us.

@Bageera63 6 лет назад

Although I'll never make this mini bar, it sure was a cool idea & I enjoyed watching. Well done!

@shaneintegra 6 лет назад

That's absolutely badass! Great job sir

@michaeldupree4360 6 лет назад

Awesome job! Great detail to your work!

@hellonwheels341 2 года назад

Really great idea and outcome this would be great for my military vehicles

@jorgelara1694 6 лет назад

Very clean work, I'll be trying this soon. Thank you

@01136428 6 лет назад

Such a nice clean finish, wow!

@mikec5487 5 лет назад

Exceptional! Great job.

@izaragoza 6 лет назад

Awesome job! so neat and clean.

@jbbeto007 6 лет назад

Seriously, a great job.

@staceonthecase 4 года назад

I love your videos! So creative and accessible 😄

@rendirodex4111 4 года назад

Usefull think No music Perfect result Detaily amazing...nice work at all #greeting from indonesia

@AlfaGTA156 6 лет назад

That awesome. Looks like a quality piece. And the great thing is the materials used doesn’t cost a lot. Subbed👍

@tomtom786 5 лет назад

What a great idea and excellent job, great vid, thanks !

@Moukarimies1 4 года назад

Very cool step my step video. Thank you sharing this!

@mudmaster3450 4 года назад

This is the perfect gift for my brother and his Geep

@jeffcarpentier3242 5 лет назад

so sweet u are a good craftsman u have a good eye for detail good job brother

@Twig963 5 лет назад

I love it and am subscribed!! Thank you and have a great day!

@thangmy575 6 лет назад

Wonderful well done! Thanks for sharing!

@kcwoolsey1396 5 лет назад

This is so cool - now you need to make one for ice - I have a feeling you probably could figure that one out!

@fredricknordfeldt72 6 лет назад

Great project, nice result! 👍

@diytherapy2644 6 лет назад

Realy nice indeed. Simple and beautiful

@mihneastan5463 5 лет назад

That is the best thing I have ever seen!!!

@stoneblue1795 6 лет назад

Subscribed. I like your style, friend. Very well done.

@AndreiIR000 6 лет назад

Excellent job! Congratulations!

@MultiMarty100 5 лет назад

Great work👍. Keep it simple and useful👌!

@salsavani 4 года назад

Meticulous workmanship !!

@crazycowboy5074 4 года назад

That would be a good fathers day gift

@kennya8681 6 лет назад

This is awesome what a great idea and your skill and craftsmanship is impressive. You got yourself a new subscriber!

@DylansDIYWorkshop 6 лет назад

That is very well done! I love it!

@hennic13 3 года назад

Excellent video. Well narrated with attention to detail.

@Kentirir 4 года назад

Well done, sir!

@HarleyQuinnJokr 6 лет назад

I love it!!! Great work!!!

@Smurphenstein 6 лет назад

Nice work. You're a legend.

@Rainer238 5 лет назад

thx for this inspiration. After watching your video i build mit by myself, but i added a led Illumination in the top with 9v battery, wich can be replaced by opening the lid. also, i added a momentary switch for turning on the light when opening the door.

@Melanye21m 6 лет назад

Amazing!!! Congratulations for organization e details at job.

@andershallberg3978 5 лет назад

Simply excellent!

@jimfoster405 6 лет назад

Very nice! you sir are a true craftsman!

@Thatguy-cf9qj 6 лет назад

Man it's too perfect.

@killerghostmonkey 4 года назад

Well done. It would be interesting to figure out a way to partition off the area above the bar to make the spout and what limited space is left functional.