How To Make A Press Form - Embossing Sheet Metal Using Basic Tools!! 

Man I hope you don't get tired of making youtube content. The whole vibe of your channel is awesome, no screaming or silly shenanigans, just awesome skills, and just enough info so that we will all go into the shop and try at least one thing you have shown us.

The definition of a great channel is one that you get excited every time a new video pops up because you know that it will be quality stuff. Your channel 100% represents this definition!

Mate you are a legend 🤩 I didn’t think you would get around to this so quickly for me, I love it and I will take you up on your very generous offer 👌🏼🤙🏼 thank you heaps for doing this video.

I worked in a sheet metal shop 50 years ago, we fabricated and embossed, with basic tools, I really appreciate your metal working skills, and your ability to think your projects through.

I’m amazed, impressed, slightly jealous and thrilled that you’re able to pump these out so often. Thank you for showing me what’s possible. Best of luck to you my friend! 🍻

Amazing work. Don't feel bad about trying it before you recorded - it shows you care about what you are teaching people, and that you don't want to mislead anyone. It's much appreciated. Thanks.

Embossing AND a burn-out to boot. You guys are THE definition of Kool. Thanks for all you do. I'm a blacksmith but you have me wanting to build a rat rod now.

Only good spirit folks on youtube lately. Blessed by the lockdowns? Great times of evolution ahead. Thanks for your contribution brother!

It's a real pleasure to watch and learn from your videos. I also note that you take the time to acknowledge the comments from your viewers something that very few YT posters do. Also big thanks to your patient camera assistant for capturing all the important shots. Keep the videos coming.

Simply spectacular! 👏👏👏👏 And I LOVE that you, or your wife 😉 equalize the sound, so that when you are running the angle grinder or other tool I don't need to lower the volume 😁😁😁

I can’t believe I haven’t been watching you before now. Full of good ideas.

Making something out of nothing. Nicely done. I have done a few of these over the years. Like you said great for the odd floor pan.

Your videos are amazing I've just been in total awe using old school techniques even for us 63 year old newbies!!! Thank you so much.

I really enjoy watching and listening to your work and explanation's Karl. Just the way you always come across with a happiness in your soul...:)

Thought I watch one episode before I went to bed...darn it... now I want to go out and make a form!.... thanks!!

From Bad Chad land... your stuff is golden. I hope you never get tired of making these videos... great content. Keep up the great work Fisher

My Grandfather was a master craftsmen tool and die maker. He told me that a file only cuts in one direction. Don’t drag the file across the metal when pulling back. It just dulls the file faster. Hard to remember to do that sometimes but I notice it actually works better as well.

Great channel clean no bs just to the facts " the teaching ". You have a great channel at my age, I still do enjoy watching you. Thanks for the lesson. Great video thanks 😊

Love watching a young guy keep the skills going for the generations to come.

But first, minibike burnout! Dude, you rock. Love your videos. Lotta creators on RU-vid, not as many good teachers like you. Keep it up bro. Lotta people wanna learn but don't wanna go to school. Sometimes all it takes it someone to show u it CAN be done.

Thanks for always showing an alternative ways to do things without utilizing expensive tools! You really help me (and many others I assume) to stay creative despite of all my limited access to tools. Cheers!

Who are the two plugs that disliked this. This is good info

After a hard day's work, I literally relax to these videos 👍

I love it! Really appreciate that you take the extra time to use the tools that us regular folk are limited to. Thanks a lol 👍🏾

Karl , you blow my mind ! That’s awesome. Thanks for the lesson.

Great project, a little lube will help a lot with press forming.

100% good enough 🤣But on a serious note it is good to see some who will not only use basic tools but show how to do it and yes thinking out side the box . So many times we put off doing something because we do not have the special tools required for it I myself have been guilty of this as are many of us . You have a gift for teaching with your down to earth explanations be it online but I am sure if you offered classes to teach metal forming you would get people who would want your classes. As I mentioned in another post I did a back to back classes with Lazze he is a very good teacher and even though it would piss me off as how he made it look so easy 😁but I have much respect for him and I am sure you would be a very good teacher in a class situation you have a wealth of knowledge to impart on those willing to learn

This channel is going to blow up once it hits the algorithm!

Really enjoy watching your creations. Would it make sense to have an inner/lower die, as well? Maybe it would sharpen the finished product and allow you to get as deep as you want without cutting the metal? Thanks again for sharing your work.

Love the videos but I wish you used the grinder with the guard fitted as most people do not have anywhere near the skills you have with dangerous tools!

As a fellow fabricator it’s so noce to learn things and advance my craft as well, you guys are really doing some nice stuff and appricite the authenticity and sharing, no ego juts honest awesome content from genuine good humans . Appricte and genuinely love y’all. Thank you much

I just love when you show mistakes and then explain how to fix them. Thats the problem with a lot of videos. We all make mistakes, learn from them. Thanks for sharing

I would value a skull with horns wearing a helmet much more than a bow tie.

I really like that you take your viewers into consideration when doing How-To vids. Can’t tell you how many I’ve turned off when the guy walks over to the lathe or mill. Huge thumbs up!!

You could be a jeweler like me. Been in business for 35 years. Awesome work!!

Mini bike burnout bonus 😎👍👍"Gangster"

Добрый день. Когда я начал смотреть ваши видео у меня было чёткое ощущение что оператор у тебя девушка.Когда я подписался на твой канал и в одном ролике ты сказал, наушники для Кристины, я улыбнулся. Картинка четкая ,ты и твоя работа в центре кадра ,вы молодцы.Работайте в том же формате, с удовольствием смотрю видео. Вы Американцы умеете не только создавать продукт, но и его представлять.Удачи.

A very underrated channel for sure. Love every episode. Sending love from Australia.

one of the things that I like most about your channel, Karl, is that you always demonstrate there are a lot of things you can do with some common tools for projects. Great videos, man!

Great job teaching that You have a present about yourself that makes you easy to watch and not get bored Thank you

Time, Tools, Talent & Technique. Very Impressive. 🤩

Really appreciate how you treat your viewers as individuals. You answered a question for me too personally a while back, and I haven’t forgotten. Many thanks, and keep on.

So glad this great vid (and others) exist and came up just in time, it’s given me confidence to do a one off job I’m doing. Thanks

I really appreciate that you showed how to built the dies using simple tools. Most of us have access to a grinder & welder and know someone with a press, but have never attempted to do what you just demonstrated. Thank you for the step by step procedure. Your videos are awesome.

Awesome material! I always loved fab work!

Great job what an awesome talent you have !! I really enjoy watching you making tools and showing how to fabricate things with all of todays special tools and cad stuff the hands on approach is becoming a lost art .It's sad the don't teach things like this in metal shop anymore ,you still need to know how to do things the old school way gives so much more appreciation for something you built yourself. Keep up the videos and the good work ..Thank you !!

I love that you work so hard to do things with tools anyone might have. But still, there ain't no way in hell mine would look like that. Some serious talent with a grinder you got.

Just started getting into doing body repair on my 05 Dodge. Have already learned so much from you. It is so nice when a pro shares his knowledge Thanks

Incredible results and your instruction is spot on! Cheers and thanks for sharing. Thumbs up!

Sweet little example of a die! Really enjoy your teachings for everyone at home!

Holy cow! Another excellent video!

I never really knew, but this last year I've just been so passionate about learning things like this. I want to be a maker, to create things like this is so awesome. Thank you for your videos!

talented hands, mind, eyes. very inventive. As always, an honor to see your work and have your teachings.. thanks!!!!!!

First video I have seen from you. Great attention to detail with the video editing and choreography. Like cutting out the sound and giving a overview in case someone skipped 👍👍

Great content mate, the channel is great, no annoying music to cover the info.

Awesome awesome video! Enjoyed the heck out of this one!

I’m digging on all your content. Great job.

Fantastic job Karl love the Chevy emblem. Your talent is unlimited. keep up the good work.

100% good enough. I like that expression!

just don't stop man you're making video's it's amazing ! keep going !!!

Awesome video! Will definitely share this with my students!!

You're awesome dude. Thanks for your generosity in sharing your knowledge.

Great videos. Learn something every time. Keep up the good work!

Workshop !A man s paradise !

Just wanted to let you know that you are a very talented metal guy.

Another great job. You keep blowing my mind on stuff you do.

loved this information and thanks for being that kid like wondeent needed to play in different styles,keep that mindset looking forward to your next what if thought process

You are a fantastic teacher

Super excited I found your channel. I love fabricating. And there’s always cool trucks n tips. Makes me really want to start testing the extent of my skills, and learning new ones.

You are a awesome fabricator.. respect

Awesome fab work man. Can’t wait to try some of these things myself. Thanks a million!

Stellar work. Every video you amaze me with your talent and ability to explain how it. 👍🏻👍🏻

When you started this video I wondered whether you would offer the result to the person that asked the question! Very cool that you offered to send him the panel for free!

I admire your work man. Greetings from Croatia

Awesome work!!

Appreciate you passing along your skills.

A month late on this one...but I think I have found a bit of a gem of a channel here. Someone who actually teaches some stuff...and always forgets to plug in his tools..that's me also...These fabrication tutorials are 'on point' and completely relevant to those who struggle at home...CHEERS!!

Awesome man- thanks so much for the video. This is the first i've seen and love your style. Also like using tools others may have available for inspiration. Thanks so much!

I love your content! Lots of information, not drug out and boring. Thanks 👍🏻🇺🇸🍻

Beautiful logo ! Bow Ties, great name for a bar!

Greeting from the Caribbean!!! I really appreciate you sharing your wisdom. That burn out was amazing!!!!!

I think your videos are amazing I like watching them I'm learning a lot keep it up

is anyone else continually amazed at what he can accomplish with some pretty simple tools! He should change his name to Master Kustom

Just subscribed! I like that you use simple tools so anyone can follow your lead.

Great result from simple scrap and well explained. Thanks for the video.

Love the fact that you think of what others do not have. I myself wouldn't mind if you "cheated" once in a while. Thank you for the time you take to show us.

This is one of the most useful videos I've seen in some time. Thanks for the hard work!

Man that’s awesome. I’ve learned more from this page than any other I’ve seen. Keep up the great work. You guys are amazing 🤘

Super good video. Now onto making a Dodge and Ford emblem. Oh! and a Cadillac emblem for the wife's car. Thank you very much for sharing your great talent.

Man that's badass!!! Nice work!!! Always get something out of your videos!!!!

Mad skills! Thanks for sharing your knowledge

Very cool. I like that you don't put music of any kind on your videos.👍

Excelente trabajo.Gracias

Great work. Entertaining videos. Thank you. I may have to make one for my 1964 Chevy C10 Fleetside.

My compliments. You never size to amaze me. That was great

Another gem.

You never cease to impress me! Have the same problem with plug in, most recently it’s become failure to put a battery in!!! Seriously excellent job of showing and explaining how to do...Professor!

Another great video brother. Nice work

dude your hand skills are crazy !

Come out beautiful.