Hello friends, welcome to our channel. this video is about the build of steam engine. This steam engine is fully made of iron. the base plate is made up of 6mm thick iron plate. the cylinder is made of 21.5mm thick and 87mm long iron rod. this iron rod is drilled with 10mm drill bit and its drilled from side for pressure. piston is made from iron rod and its grinded to make it 10mm thick accurately so that it can easily slide in cylinder with 10mm bore. the valve cylinder is also made with 21.5mm rod and it is 64mm long and it is also drilled with 10mm drill bit up to other edge. valve cylinder has two hole side to side for passing pressure to cylinder. valve piston is 10mm thick and has one hole and opening at the edge for pressure passage from boiler to cylinder and then back cylinder to surrounding. the pistons are connected with flywheels by connecting cranks. In starting of video small wheels and small boiler were used but later in the video bigger wheels were used to increase momentum and bigger boiler was used to increase pressure. three flywheels are fitted in two brackets. wheels are made on our homemade mini lathe machine. the central wheel is bigger and heavier to make more momentum. the boiler is made with 114mm hollow iron pipe and it is sealed from ends with iron plates and edges are sealed by gas welding. burner is fitted at the bottom of boiler to make steam of water in boiler. the pressure from boiler to engine is passed by 10mm hollowed iron pipes. boiler has two holes on it, one to pass pressure or steam to engine and other to fill water. this hole is sealed with long bolt while operating the engine. This Steam Engine is very powerful, strong and it runs very fast. I hope you enjoyed the video and liked the video.
thankyou for watching
NOTE: This is an official video of APS Tools channel. the reuploadation of this video in any way and by anyone is strictly prohibited.
ATTENTION: The tools and machines used in this video may be dangerous if used improperly so don't try to use them at home without any training or without the supervision of an adult.
Please Subscribe my channel, like and share my videos and please comment.
your support is inspiration for me, so please support me so that I can share my ideas with you.
Thankyou
APS Tools
#apstools
31 дек 2020
