How To Make a Tensor Ring [Step by Step Instructions] 

Thanks for commenting and watching 🙏🧘‍♀️👍

My pleasure 🙏

My pleasure 🙏

I encounter similar problems early on. Try to make sure you bend the copper enough so that when it's un-soldered, it rests with only a 2-inch gap. This takes the tension away from the weld. I've also started resting a small metal weight on the ring in my work bench vice (in the video) to keep a tight bond while it cools. Hope this help. Also if the problems persist try using a thicker wire. This gives more surface area to weld. Hope this helps. Good luck with the tensor ring making. 👍🙏

A few people have used the tensor rings to put around their smart meters. Thanks 👍

@@cosmicjourneyswithalanstoc5608 thank you, would it fit the long square one please 🙏

@yellowrose803 Can you give me the dimensions of it, and I will check for you .

@@cosmicjourneyswithalanstoc5608 thank you, will do it once home. 🙏🤗

Yes🙏

Hi, I use 12 gauge wire (2mm) for all my creations.

@@cosmicjourneyswithalanstoc5608 Thanks Alan! .... Ps.: your hard cover book on its way!

@a.j.m8736 Wow thank you. 🙏

It's 2mm wire I use in this video.

They have different attributes for start you make 144 because thats the only one you can make without precise measuring equipment

What this mean, what frequency ?

No product copper is oxidising regardless you can clean it with vinegar and salt

A good rule of thumb is approximately 25% extra

Trigonometry is the answer.

The thickness doesn't matter apart from the strength of the finished ring. The number of twists needs to be enough, so you can't see any gaps.

Since making this video, I've been doing exactly what you mentioned. Great minds, thank, alike ☺️

Hello, I'm very sorry, my English is not good, what is good to solder the two ends with?

I would not solder the ends together with dissimilar metals - I would join the ends together with a piece of copper tubing or a copper lug used for electrical wire etc.. that is compressed fit to the ends! I would keep it all copper. @@ivanarihtev8265

​@@ivanarihtev8265I was thinking the same thing.

@@cosmicjourneyswithalanstoc5608 Hi Alan, do you have a video or know of a tutorial that can use this method regarding using a "solid copper compression lug" or a piece of "copper tubing"? I am also trying to avoid using a solder By the way, I just made my first tensor ring with your help following this guide, but can't seem to get a tight fit on joining the ends, no matter what I do. Nonetheless, thank you for the awesome videos :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-taKNBE4Cm88.html And thank you once again in advance for your time man :)

Only uncoated

Plus can you put the lengths on here so I can have a go making them

This website is a wealth of knowledge on these tensor rings and what the different sizes are for.

Bare copper wire is the way to go, my friend 🙏

@@cosmicjourneyswithalanstoc5608 thank you very much.

When you twist the wire, this creates the effect of a positive energy coming from the ring in both directions. Hope that helped.

@@cosmicjourneyswithalanstoc5608 thanks mate

It's the same way wherever you are, Ruth. Thanks for commenting 🙏 🙂

Clockwise :)

I've heard the opposite. Counter clockwise in the south, clockwise in the north. Just like water flows down the drain in opposite directions depending on where you are. It's the way the energy works. Maybe look elsewhere for your answer to be certain, just in case.

@@mirandafriske4525always twist tensor rings clockwise

You turn clockwise only this is not electroculture

I use 12 gauge copper wire

They can be worn on the head to help with healing and with meditation experiences. Also they are good to sit your water vessels in. The tensor ring restructures the water and makes it purer and of a higher vibration.

@@cosmicjourneyswithalanstoc5608 thank you so much for this and for your time. I will save your video for reference :)

Hi, I do sell tensor rings on Etsy. Here is a link to my shop pyramidpowerproducts.etsy.com?section_id=47444538

Here is another video I made showing how to use the tensor torus tube ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Wtlg3SgHKHs.htmlsi=GMWJKIvPifzmnTSA

@@cosmicjourneyswithalanstoc5608 Thanks so much, i'll check it out now

Mark it before you bend..?!

If you go to this website, it has many sacred measurements on it. sacredmeasures.com/measurements.html

@@cosmicjourneyswithalanstoc5608 Thank you!

This website has all the cubit measurements on it. sacredmeasures.com/measurements.html

Hi Allen, Yes it is an important step. You mark the copper wire at one end and follow it down (with your thumb nail) to the other end. Mark it and make sure they are connected when you solder them together.

@@OreoCookies2076 100%!

@@OreoCookies2076but at the end both wires are connect by the soldering , isn’t it ? I mean they are solidly connected and not individually?

@@jonjones971 correct

Mark the bent end and last two inches of one side, it'll burn off before the solder flows

I do 3 sizes. Mens, ladies, and child size bracelets. pyramidpowerproducts.etsy.com?section_id=47772772 Or I make these Bangles which are made to a Earth Resonance 333mhz cubit in 2 sizes pyramidpowerproducts.etsy.com?section_id=46758975 Thank you for commenting 🧘‍♂️🙏👍❤️

@@cosmicjourneyswithalanstoc5608 alright I'm a bigger guy so just wondering. Definitely getting one

I'm so glad you enjoy my content. In regards to the correct length of the sacred cubit. At the time of making this video, I was a relative newbie to this subject. I mistakenly made it to the length in the video. However, I later found out this was the straight line sacred cubit length. So the correct length of a sacred cubit tensor ring is in indeed 52.4 cm. I will say that I have also come to realise that the energy which the ring is made plays a big part in the effectiveness of the tensor ring. I say this because my mother-in-law was gifted a set of tensor rings made from the straight line cubit. But she saw great improvements in her general health and outlook on life. So it seems my intention and belief it was the right measurement made it beneficial still to her. This really showed me that we are the most important part, and our energy and intention are crucial.

@@cosmicjourneyswithalanstoc5608 Aha I gotcha man. Thanks for the detailed reply. And yeah, I definitely agree with you in that we, and our intention, are the most important part of the energetic process, 100%. Funny you mentioned that because: After I wrote this and continued researching, I saw that the length of an egyptian cubit somewhat varied because it was the approximate length of the tip of the middle finger to the end of an elbow. I thought to myself, if I wanted to make an energetically resonant structure specifically for myself, maybe I should just use the length of my own middle finger to elbow! haha

Yes, I sell the ones I make on Etsy.

pyramidpowerproducts.etsy.com?section_id=47444538

?

Not according to this website, which I've verified sacredmeasures.com/measurements.html

@@cosmicjourneyswithalanstoc5608 You are making a tensor ring in this video not a straight line frequency

Thanks for sharing your wisdom, I'm pretty new to all this myself. I just know this information needs to get out there. So my motto is just go for it and let the universe guide me.

You're very welcome you also need to make a firm intention and be in an elevated state of emotion when twisting the wire in order for it to work properly tensor rings go far deeper than just twisting a wire it involves higher dimensions

What Gauge copper wire size do you recommend the best or the Max for a drill?