How To Make A Truck Bed Tool Box // DIY Storage

Подписаться 62 тыс.

Просмотров 30 тыс.

50% 1

Episode #796 Today, we're building a storage system for dad's truck. We want to have it for our trip to Texas and not have to carry a bunch of different tool boxes. This thing is awesome!! We made adjustable storage compartments to fit a ton of different gear, and we still have room to store stuff on top of it.
Our website for Sign Carving Supplies: www.makeawoods...
Router Bit Depth Gauge - makeawoodsign....
Base Plates - makeawoodsign....
Router Bits - makeawoodsign....
Surface Bit - makeawoodsign....
Dewalt Router - amzn.to/3V6hM5C
Milwaukee Router - amzn.to/3RIb02O
Ferry Lights - amzn.to/3YJd92y
DeWalt Disc Sander - amzn.to/3e4aUVL
DeWalt Random Orbital Sander - amzn.to/3Cyo7PM
Spray Primer - amzn.to/3RGcXwT
Spray Clear Coat - amzn.to/3EgYS61
DeWalt Angle Grinder - amzn.to/3WZO4Qu
Kutzall Extreme Course Disc - amzn.to/3hOB9AT
Kutzall Medium Disc - amzn.to/3EDkl8m
Super Gloss Epoxy Resin - amzn.to/3AgPNXW
Dewalt Die Grinder - amzn.to/3SlnFuK
Kutzall Extreme Flame Burr - amzn.to/3kgdnPU
Foredom Rotory Tool - amzn.to/3XQYKQJ
Green Tape For Transfer - amzn.to/3ZqM7wP
Freezer Paper - amzn.to/3IE1R97
Email List - makeawoodsign....
Starbond - bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase
We also have 2 online courses. We have a FREE Video Course. 7 Steps To Sign Carving Basics. Here’s the link www.makeawoods...
Plus, Ryan & I completed a paid course titled ericrhoten.pod...
Check these out and let me know if I can answer any questions for you.
If you don't know where to start, Here's our Small Beginners Sign Carving Kit
www.makeawoods...
My favorite router bit, www.makeawoods...
My Dewalt DWP611 base plate www.makeawoods...
Comments or Questions, my Email: eric@makeawoodsign.com
Vicki's Email: vickiwithdavesigns@gmail.com
Free router bit sharpening service now available. Learn all about it & all the Premium Membership Benefits.
www.makeawoods...
Here's a link to our Amazon Affiliate Store www.amazon.com...
“Get the Freshest CA glues on the market from Starbond. Here’s the link
bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase”
Instagram: MAKEAWOODSIGN
Facebook Page: www.facebook.c...
Links to the SCOTD albums on our F/B page:
SCOTD 4
www.facebook.c...

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@SawdustmakerLori Год назад

That turned out super nice!!! It will come in so handy for your trip and everyday use......great job. If you two get out of control Vicki can put each one of you in a roller compartment and have the whole front of the truck to herself!

@oldave100 Год назад

Thank you Miss Lori, yeah Ryan and I are aware of our fate if we get out of line, 😂😂😂

@brianspurrell3348 Год назад

Love watching you guys work together, like looking in a mirror at my son and I. Argue like cats and dogs but an the end of the day we're both happy and calling "Miller Time". Can't beat a father son team.

@oldave100 Год назад

Yeah, father and son team is kind of what I'm used to. We're having a blast....

@midstaterustics4507 Год назад

Great idea to help with organization. Having everything in its own area should help with having to hunt for things.

@oldave100 Год назад

That's what we're hoping. Thank you Don

@shirleyhall3555 Год назад

What an awesome project for those of us who must be organized! Excellent job!! I’m impressed.

@oldave100 Год назад

Thank you Miss Shirley

@pamelaberry4520 Год назад

That's really awesome. Ryan, how did it taste saying "Dad was right" that many times. Lol

@oldave100 Год назад

😂😂😂 Ryan's back in CA right now, so I'm answering the comments. I guess the old man still has a few good ideas....

@bosting01 10 месяцев назад

Looks great. Instead of rollers I used 1/4” strips of umhw as sliders. If you park on a hill the rollers will let drawers roll out. The umhw lets them slide easy but won’t let them slide out on their own. Also keep the bottom of box flush with tailgate and tailgate supports drawer when fully extended

@oldave100 10 месяцев назад

That's a great idea! Might have to modify it later

@greggordon6215 Год назад

Nice build! Looks very handy for what you are going to use it for!

@oldave100 Год назад

Thank you Greg, I think it will work well for us.

@billlarrabee9436 Год назад

That was a great idea and build. Enjoy it!

@oldave100 Год назад

Thank you Bill

@MachineEarth Год назад

I have the box part built for my GMC Canyon, but i plan on using angle iron on the sides of the drawers with bearings, and the top is the width of my bed just over the wheel wells. I have covers over the front cubbies. Will take pictures when im done and send it to you.

@oldave100 Год назад

Sounds great. Look forward to seeing pictures. Thank you for watching

@Pete.Ty1 Год назад

👍👍👍Great job there lads, Best wishes to Vicki.

@oldave100 Год назад

Thanks so much!!!

@ericbutcher3887 10 месяцев назад

Hey this help out a lot thanks guys

@oldave100 10 месяцев назад

No problem, buddy👍👍

@GaryZellner-nx4wq Год назад

Looks amazing. Have to be careful about pulling the drawers out too far so that it does not come out of the truck. What would it take to add a couple of drop down legs on the bottom of the drawers to extend down to the ground for drawer pullout support. One man could handle the access to the extreem back cubbie with the overhang supported with the support legs. A horizontal brace leg connector between the drop down legs would help with ability to raise the legs back up under the drawer bottom with one hand.. Sort of a lopsided "H" design. The support legs could also be made telescoping to adapt for unlevel ground area.

@oldave100 Год назад

Really good ideas, Thank you Gary. We may have to do an add on modification....

@danyodice1048 Год назад

Nice job EZ E....🤘🤘🤘

@oldave100 Год назад

Thank you Dano...

@AlienLeader4 Год назад

Very cool idea. That flex seal should help keep things dry. Keep up the great work. 👽

@oldave100 Год назад

So far it's working great. Very "non skid" as well.

@DesertBumWoodWorkn Год назад

That's a really good idea guys, are you taking your Mobile Workshop

@oldave100 Год назад

We're not taking the mobile shop to Texas. We'll be inside in a booth.

@charliemarlenewuester5261 Год назад

OK now I have to admit you have me on the edge of my seat. I have been wanting to do this for a couple years now. But I don't want to use it for storage. I want to use it to carve out of.

@oldave100 Год назад

I think it could definitely be modified into a carving station.

@MachineEarth Год назад

Cut out the sides halfway back, put hinges on with a chain hanger. Drop down legs on the drawers as well.

@monteashmore3730 Год назад

That should make keeping tool organized, a lot easier.

@oldave100 Год назад

We hope so, Thank you

@paulaiken240 9 месяцев назад

I’ve been looking for a box design for my truck for long rv trips. This looks perfect. Not too complicated to build but plenty sturdy. Where did you find those rollers/casters? Thanks, Paul

@oldave100 9 месяцев назад

Honestly, we love this thing. We got them on Amazon and they were pretty cheap

@raphaelchicago9138 7 месяцев назад

What thickness plywood did you use I want to build this setup, and how did it hold up over the last 6 months. I would like to build this for the bottom with little removable smaller trays about 3/4 up the side. I also plan on putting slide out flat tray on top for a pull out work space and storage for bigger items. Instead if the casters I was going to run 1 inch roller ball transfer bearings. Cool setup and thanks for the vid ill be using for my build with some tweaks over the next couple days.

@raphaelchicago9138 7 месяцев назад

Ah, I just heard when you were doing the carpet you used 3/4. I don't think ill do carpet as I'm too cheap but looks good.

@oldave100 7 месяцев назад

Thanks man! We used 3/4" plywood and it's held up great! I'm fact, it's loaded down as we speak with a bunch of stuff moving from CA to az. This thing has been a God send

@charliemarlenewuester5261 Год назад

So far, I think the only thing I would do different is try to have the top. Where it will pull out and become a workbench.

@oldave100 Год назад

Yeah, that's a pretty good idea....

@RonParr-z5s 10 месяцев назад

nice video. what did you do to prevent leaking between cap and truck bed

@oldave100 10 месяцев назад

We haven't had any leaking at all

@RonParr-z5s 10 месяцев назад

thanks@@oldave100

@pwlyons759 5 месяцев назад

Why not OSB for the top and bottom if it's gonna get carpet?

@oldave100 5 месяцев назад

I'm not a big fan of OSB and this plywood wasn't much more expensive, but it would definitely work if you want to use it

@JohnClark-tt2bl Год назад

Lol nice joke. It's like me telling my wife i might go pickup some chicks at the local co-op every spring....😂

@oldave100 Год назад

😂😂😂

@stacylofton5833 Месяц назад

Do y’all have a cut list and where to get the roller

@oldave100 Месяц назад

I believe we put the cut list in the description. If not, then we didn't make one. Sorry about that, I definitely should have. We got the rollers on amazon