How to Make Amazing Tensegrity Structure - Anti-Gravity Structure 

Even when I find out how this works, my brain is still saying 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa'

Physics: **works** Humans: :o

Imagine, architect make a building with this concept

Load carrying capacity of the structure is equal to the tensile capacity of the string. Since only one string is provided at the centre I think at maximum load the end string reaches only it's half capacity. But aesthetically it is good

Hey Bro, great work. I think if you use a transparent wire like tho ones for fishing the final effect can be even more impressive. :))

I’m choosing to do this for my school art final project. All I have to do now is glueing and that string!

Architects in Dubai: "mhhh...interesting.."

Welcome back! Long time no see!! That's pretty cool! Thanks for the instructions!!

Finally a video after one full year!!!

The centre string provides tension and the other strings provide balance.

Of course there is no limit to the length of the strings, so you can hide the lower assembly; if you combine this with using transparent wire, the effect could be quite mysterious.. Great build. I like the simplicity of this! 🌟👍

I built one based on this video. It works beautifully. After setting about the right length for the center string and glueing it in place, it's simply a matter of getting the right tension on the two long strings. First, I glued the bottom of the long strings in place. After they dried, I put the other end of the strings through the holes at the top and used masking tape to hold them in place. Then, it's just a matter of achieving the right tension on both long strings to center the structure and then glueing them in place.

Thanks for the templates !!

Thank You very much . Because of this video I have also made one for me. Your work is very appreciative.

The track is "Hang Ups (Want You) - Otis McDonald"

Il fallait y penser. Très belle réalisation. Chapeau.

Parabéns pelo trabalho, agradeço também por disponibilizar o projeto, ajuda e muito aquele que querem e precisam aprender, todos poderiam seguir seu exemplo.

After watching this the first thing that came in my mind is, maybe I can fulfil my dream of living in a floating house someday.

Gracias por compartir sus conocimientos excelente video ésa sí es una repisa flotante

Finally new video!!!

Oh, this is really creative

Amazing video brother ,thank lots...

Hello people that saw the Lego version before this.

Very cool. Good ideia.

Simple équilibrage des forces 👍😊

Very Impressive.!!!!! Thank you...

Man, next time I build something in carpentry I’m building this very table. The design is so simple, yet so fascinating.

Excellent creative design

Se ve muy chevere y fácil de hacer.

Amaizing video...love it!

Beautiful and wonderful ideas

merci beaucoup

I like how he gently places something on it lol

Thanks for sharing. Cezakallahu hayr

wow, its amazing, great job 👏

You must not have cats

I always used sky hooks to build things like this. You learn something new every day.

Diseño elegante, fácil de construir, gracias por comparrtir.

Thanks bro.. I tried and I done its sucessful working antigravity ..

Полка супер !👍

Tensegrity tables: They're objectively awesome!

Incredibly cool

Fascinating !

Вау,нужно будет попробовать сделать 👍

Very very cool design

Wow amazing creation

Excelente trabalho! Parabéns 👏

Just knowing this is possible gives me a weird glee. Thank you.

wow,amazing

С возвращением!

Nice work! This looks very cool! I also made one, but there is no rope in the middle, "anti-gravity" succeeded!

Videos after so long!

Is there a relationship (ratio) between the lengths of the wood pieces or any specific lengths to avoid or try to get?

un beleve able. very nice bro. keep it up😘😘😘😘😘

Welcome back! May i ask you someting? What is the backround music?

Your videos is so so so amazing 👍👍😉😉

Thanks for sharing

Are there plans/measurements etc... available?

You’re a wizard, Harry

Wonderful, wonderful hands, greetings to you from Morocco

Amazing nice great

What is the Dimensions of each part

I forgot that I have subscribed to your channel

Yay ived been waiting for so long

Wow that's amazing a naam d so cool😍🤗

An interesting product, unusual solution!))

love it

Long time no see.... again! Congrats on 1M subs m8

Physics and gravity. Very nicely done sir!

beautiful!!

Awesome.

Amazing😍❤

Beautiful

テンセグリティ構造の中でも、この形状は一番感性を刺激されます、、何度見ても凄い

If I'm correct the way it works is simple. The smaller thread(out of total 3 threads) in the middle of the structure is the one bearing all the weight, so it does not defy gravity because the [bottom wooden support frame]'s/(or the frame which touches the ground)'s connect point to the "small thread" is higher than the connect point of the "upper wooden frame" which seems to be floating in air but is actually hanging from bottom frame through the "small thread". The other 2 long threads are there to keep the balance so that the upper frame doesn't fall to a side.

Saw this video in an ad, was not disappointed, trying this later

Hola.... por favor puedes proporcionar medidas?... ancho, largo y grosor?.... gracias..... 🇲🇽

Use chains adapted to the proportions of the sculpture (for the realistic miniature effect), it'll greatly enhance the law-defying effect! With transparent nylon wires, it blends in slightly yet remains quite visible (unless camera tricks), hence it's obvious the wires are trying to hide something. The counter-intuitive effect is lessened as it's hinted off that there is a trick. Nylon fiber wires are commonly used to hold light weight things with a purpose to look like it's not there. Hence the spectator knows it's doing something despite not necessarily figuring out what. It's enough to kill the major part of the wow effect of a law-defying trick. With more "serious" wires, like chains, the mind faces a more appearant counter-intuive behaviour of the two platforms and their ties -the chains then look like they're actually trying to hold the upper platform from taking off while actually intuitively looking like it should drop down. That's when you the counter-intuivivity strikes in and the effect is glorifyied as the chains don't look like they're doing what they're doing This kind of presentation is what turns a nice trick into a magic trick. It's not easy to explain but it's very effective :)

Can you make one with tension on both x and y axis.

Amazing

The top structure is hanging by the middle string. Because its centre of gravity is towards the top, it tends to rotate clockwise/downwards...this causes tension in the 2 strings which are preventing it from toppling. Balance is very important in this design....

Hi, can you give me the measurements of the wood battens?

Mooi werk. We gaan het uitproberen

Прикольно,когда такое видешь думаешь как просто,а я до такого не додумался,если сделать такую табуретку.

I would use fishing string for a cooler effect :)

Muito obrigado mesmo. Parabéns

Does it matter what length the wires/strings have?

I've built a couple of tensegrity structures like this,. The most important thing is to have some way of tensioning the wires/chains/whatever after construction. In a diy environment the chances of getting the tensions right first time aren't great - not if you want the top to be level, at least. That said, once you've managed it, you WILL impress your friends and families, no question. Their first question is invariably "Is it a trick?"

Bom dia sou do Brasil eu fiz e deu certo parabéns pelo trabalho não ficou igual mas deu certo

what's the music called??, love it

Good amazing videos you tutorial

It’s a simple illusion-the centre wire holds the weight, the other two stabilise.

Whoa! How does this anti-gravity structure do that!?

Welcome back!

THE MOST IMPORTANT VIDEO IN THE UNIVERSE

Keren banget👍👍👍

Pretty easy really the middle chain thing is hanging so gravity is pulling it down. The other 2 side chains are being pulled up by the top and just to keep the top in place. Image if the top wood wasn't there the middle chain would still be hanging down

The template provided generates a small structures, only a few cm or inches. Can the dimensions be proportionally increased while maintaining the integrity of the structures?

Do u know if measures work proportionally?