How To Make Budget Hydraulic Assist Steering!! Rats Nest Can Steer!

Подписаться 563 тыс.

Просмотров 80 тыс.

50% 1

If your run a locker in your front axle or have 37" or larger tires then you really need hydraulic assist steering on your offroad rig. We will show you the easiest way to put hydraulic assist steering on your Jeep while still keeping it budget minded. Using the Bleepinjeep hydro assist steering box, Your original pump & a Trail-Gear hydraulic ram. This video will teach you how to make your power steering pump a little better for .05 cents in parts. We also hope to see you in Ohio February 25 & 26 at the Dayton Offroad & Outdoor Expo and we have a little suprise with our onX Offroad Build Off Challenge vehicle. Do you know what it is?
Trail Gear Ram: trail-gear.com/universal-heav...
Bleepinjeep Box: bleepinjeep.com/product/hydro...
*********************************
Episode 1: • I Bought A Hooptie! Ra...
Episode 2: • How To Get Good Parts ...
Episode 3: • Jeep XJ Lift - How To ...
Episode 4: • Rats Nest XJ is starti...
Episode 5: • How To Make Your Barne...
Episode 6: • Did I find a Unicorn o...
Episode 7: • Rats Nest Strikes Again!
Episode 8: • How To Install A D&C E...
Episode 9: • Bet You've Never Seen ...
Episode 10: • How To Stop Rust Forev...
Episode 11: • Crawler Hauler Update ...
Episode 12: • Jeeps Secret Past!?! B...
Episode 13: • Biggest RU-vid Wheeli...
Episode 14: • We Got A Call From @Ma...
Episode 15: • How to Install a Yukon...
Episode 16: • @RobbyLayton Shows Up ...
Episode 17: • What A Disaster! Will...
Episode 18: • My Jeep Caught Fire!! ...
Episode 19: • NEVER REPLACE BALL JOI...
*Episode 20: • How To Make Budget Hyd...
Episode 21: • Bet You've Never Done ...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RU-vid: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Авто/Мото

Опубликовано:

28 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 186

@bradbrabson4475 Год назад

Man I miss Matt doing build videos in the tiny shop

@adamradley4407 Год назад

Those building videos are what got me started on the channel. They also gave me motivation to try my own in my little garage.

@mechanicp8015 Год назад

Me too. I don't watch much no more unless its building.

@javman03 Год назад

Just a tip when doing power steering work. Once you are putting the fluid in, draw a vacuum on the reservoir and it'll pull all of the air out for you before ever turning the pump at all. I use a brake bleeder, that I stuck the hose through a rubber shock bushing I had laying around the garage. Then you can hold that rubber bushing down on the top of the reservoir opening to seal the system. Works fantastic every time, never had a single air bubble or groaning pump!

@bleepinjeep Год назад

Good tip!

@Wheelingoffthewrench Год назад

I’ve done that The psc reservoir makes it easy I just connect to the fitting on the cap and Dre on it. I also pre-filled the ram and the lines before attaching to the steering gear

@Nik-ok9nu 9 месяцев назад

Love these tips.

@pameladutton9076 Год назад

Hey Colt, nice job! Not trying to be mister know it all, just trying to help everyone. Saginaw PS boxes use different size fittings for pressure and return, can't be incorrectly installed, also when grabbing PS boxes from junk yards, don't forget Saginaw boxes use different types of fittings. Early boxes use inverted flare style of fittings, later boxes use O- ring fittings. This pump upgrade is a must when adding a ram, you really need the increase in PSI and GPM to reap the benefits of the ram

@99unclebob Год назад

Great video Cole, you keep it simple for all of us to understand, those old jeeps are getting really hard to find here in Canada that are not rotted out, the motors never die just the bodies, that Harbour Freight Plasma cutter looks like it works pretty sweet, I've wanting one for awhile 👍

@Tpbmods Год назад

What part of Canada are you in? Im in the Okanagan here in BC, and you can find em all over marketplace.

@jordantrujillo293 Год назад

Colt I am loving all these videos you’re doing on rats nest! These are great since I have an XJ I’m building up as well, it helps when you show how to do it on a budget.

@bleepinjeep Год назад

Glad you like them, thanks👍

@jordantrujillo293 6 месяцев назад

⁠@@bleepinjeepdid you ever find a longer pitman arm? I was doing some research and found the WJ pitman arm is a good upgrade.

@MarkoMygun Год назад

Matt you have 2 badass rigs and it's hard to choose but I really like the Comanche, great job on video today Colt thank you.

@bleepinjeep Год назад

Good choice!

@mridaho7871 Год назад

Both

@DrHavok1 Год назад

scorpion is my favorite... it is why I joined the BJ channel long long ago

@Robsksas Год назад

agriculture cultivators use a similar hydraulic system to set ride hieght. they use clip on spacers that work perfect. no machining necessary.

@69soulseeker 8 месяцев назад

Don't get me wrong, I like all the guys at Bleepin Jeep. However, Colt's videos are my favorite hands down!

@talon0863 Год назад

Thanks Colt

@abnpthfdr2934 Год назад

Great idea on using the tranny cooler as a power steering cooler.

@bleepinjeep Год назад

Thank you, it's been something I've been doing for years since I seem to always own manual transmissions, haha.

@yjsaabman Год назад

Yes! That pitman arm puller is the best one I have ever used! Far superior to the 2 arm style. Great video, Colt! This is a great upgrade for so many of us.

@dandahermitseals5582 Год назад

That's, because it's a Snap-on tool Dandahermit

@yjsaabman Год назад

@@dandahermitseals5582 Believe what you want, it's all about the design that keeps it far more rigid than any other I have tried. Mac, Matco, Cornwell, S&K, doesn't matter to me. If it's the 2 jaw style, I'm going to pass on it and go to this one every time.

@dandahermitseals5582 Год назад

@@yjsaabman So ???

@grisby6484 Год назад

Comanche is more interesting and more inspiring than a purpose built crawler, take the Comanche

@rushthezeppelin Год назад

Get the Quinn 1/2" torque wrench from harbor freight. Goes up to 250# and only costs $90. Works great.

@richardashley6312 Год назад

Thanks for another great tutorial Colt 👍

@geriatricginger Год назад

I love these explanatory DIY vids you do. Especially the part about modding the PS pump.. Makes a lot of sense. Thanks!

@timpretzsch2609 Год назад

Running power steering through the trans cooler as a part of the radiator helps keep it from "overheating", but also due to the coolant heat, holds it at a stable operating temp of engine operating temp, so that the power steering is not cooling an heating depending on use.

@Redneckike Год назад

That looks like a late 80s Toyota bed. And boy I hope it is. I’ve been waiting for a Toyota build. I’m currently building a 86 4runner ❤

@bleepinjeep Год назад

That would be cool!

@robbie7878ify Год назад

I love your videos. You take the time to explain everything well.

@bleepinjeep Год назад

Thank you I try my best👍

@kennethmiller6158 Год назад

Really good instruction radio go thank you very much I've been thinking very seriously about putting a new ram on my 350 Ford so I've been watching a lot of videos you're very good thank you

@TheDevonwurz Год назад

Good information just want I needed.

@bleepinjeep Год назад

Glad it was helpful!

@brownjoela Год назад

Good job Colt. Enjoy the videos.

@danhambrick6331 Год назад

Colt is The Man..💪👍👍

@bleepinjeep Год назад

Just a man but thank you!😎👍

@garychaiken808 Год назад

Very informative. Thank you. 😊

@mattuebelacker1963 Год назад

I plan on being at the Dayton expo and would love to check out the Comanche.

@DrHavok1 Год назад

haha colt I have had a question rolling around way in the back from time to time.... power steering cooler? you answered it in this vid thanks

@chepeloc28 Год назад

I don’t know nothing about you do but I lov to see all your builds keep it up guys 💪🏻

@carparts2465 Год назад

It takes real talent to tap your own box

@psg6314 Год назад

Great video and great job with the steering God bless from GA and stay safe 🙏

@bleepinjeep Год назад

Thanks, you too!

@doug9418 Год назад

Colt is the best at explaining (The How To). 🇺🇸 👍🏻

@bleepinjeep Год назад

I appreciate that, thanks!

@humantribe Год назад

The radiator's transmission fluid cooler is a great idea to keep power steering fluid temperatures in operating range at 180 F and below 250 F. I actually plumbed the trans cooler of my radiator for additional coolant flow from the heater circuit to help combat the Arizona desert heat. I use a separate trans cooler and didn't want to waste the extra cooling capacity of the radiator. The radiator/trans cooler is really a fluid warmer more than it is a cooler. The cold temperature in snow country can make the power steering fluid flow like molasses and put excessive forces on the pump, the lines, and seals causing failure. Good video. Keep Em rollin.

@Wheelingoffthewrench Год назад

You can also shaft collar on the outside

@bushmatt Год назад

Well that is a great tip! Thx.

@nitrosrt4 Год назад

you can also set the ram so the spacer is just on the outside. i installed mine centered with the intention of coming back and doing the spacers inside and out, then i saw someone just doing the outside. forehead slap.

@H4rleyBoy Год назад

I don't know what your day job is/was but you're a bloody good teacher Colt.

@Littletwin2 Год назад

Would like to see the scorpion 🦂

@thousandoaksauto1696 Год назад

Hey Colt, great video! I'm all about the budget build. Thanks for showing the p/s pump upgrade-awesome!!! Thats money saved "man"! Now I can buy that better header for the 4.0L & rap with the fiberglass insulation like Matt did! Show me the money!!! Thanks Fella's.

@bleepinjeep Год назад

Glad to help, thanks for watching😉👍

@kundrew1990 2 месяца назад

Great vid..Maybe down the road you can do a cheaper alternative to ORI suspension maybe long air shocks .Thanks for all the great content.

@angushoover8670 Год назад

Colt. Great video as always. Matt. Take both. That way when you break one, you have a spare.

@mclarenscca Год назад

Definitely take the Scorpion, and that truck is a Square Body Chevy!

@stevecoffman6480 Год назад

I just bought a XJ. I never realized how small they are. I've had 73-74 Broncos, 72 FJ40 SBC, Jeep TJ, and at least 5 Toyota 4x4's plus a couple full size 4x4 trucks. At 6' I hit my head all the time getting in and out of my XJ. Cole I don't know how the heck you get in and out of yours as tall as you are.

@matty86suk Год назад

I like putting the ram directly behind the the tie rod, reduces tie rod roll and keeps it out of the rocks and looks cleaner

@bleepinjeep Год назад

It unfortunately didn't have enough room to fit there.

@matty86suk Год назад

@@bleepinjeep yah, your axle side track bar mount could be more outboard to give you room

@juanf4739 Год назад

You find better tools at yard sales than Harbor Freight.

@ryanbrown33 Год назад

WJ pitman arm should give you more steering angle, using one on my XJ that I’m swapping in a SD60

@bleepinjeep Год назад

I'll look into that, thanks👍

@xfactor5876 Год назад

Scorpion 2.0 all the way man!

@ThePhotographyHobbyist Год назад

I reckon I may see you up in Wilmington. I'm just down near Cincinnati so it's not a long drive and I need something to do this winter, even though I do no off roading (but I enjoy watching it). :) I do have a 4x4 truck with two turbos though 😄

@bleepinjeep Год назад

Look forward to seeing you there😉

@littleoldlady1863 Год назад

Hi Bleen Jeeps I just watching your new show 27 minutes ago do you know I really really really really really love your wife lunch it makes me happy I will praying 🙏 for you and your family and friends so you will be safe ok I love your new and old show you do a great job you have a wonderful day and have a good night and day ok love Lorilee

@Wheelingoffthewrench Год назад

Shaft collars on the rod of the ram also word as a stop. Mount what length you need to remove under the rod end

@Rocwlkr Год назад

I think you should bring the Jeep Comanche

@artyseibert Год назад

Matt’s Off-Road fab’d external spacers on his rams. Might be something to think about…

@bleepinjeep Год назад

Yeah, that's easier to do with a double ended ram like he has but I plan to extend the steering one day anyways😉👍

@Nik-ok9nu 9 месяцев назад

Another trick to remove a pitman arm is to take two BFH's and smack both sides of the pitman arm at the same time with both.

@BlackAndBlueGarage Год назад

Safety squints. Matt from MORR would be proud 😆

@davidruppel1216 Год назад

Great video! Thanks Cole! Now how about breaking down rear steer and how it works and is installed? The Scorpion crawler. Matt!!!

@bleepinjeep Год назад

Maybe a good idea for a stand alone video but it was also covered in the Scorpion 2.0 series: ru-vid.com/group/PL1U__4as20wHBk5TUk_lI1uAQIxEXTO-M

@motownXJdad9565 Год назад

my vote is the Scorpion crawler, its still Jeep powered👍

@granitesand78 Год назад

i burned through all of the pitman arm pullers at the local auto stores, until my buddy loaned me his snap on. immediately pulled it lol. what a difference a good tool makes!

@bleepinjeep Год назад

ya those little ones with two fingers suck!

@jefreyjohnson4294 8 месяцев назад

Glad you made this vid. Thanks. Question, if I do the pump mod with a speed proportional pump, will it end up being negated? And is it still the same procedure? Do I just have to remove the speed solenoid from the top before accessing the pump pressure spring Thanks again.

@norcoredneck Год назад

What a video, Colt rhyming, free styling, peeing in a bucket and dog crap. Covering real life basics.

@bleepinjeep Год назад

Real life happens🤣

@laelbickle981 Год назад

Teach it🙃

@BadmunkyWRX Год назад

I want to see the Scorpion crawler my self! And Ill be there to meet you guys for sure as I already put in for the days off and plan to go to this as its only about 2 hours away from me!

@bleepinjeep Год назад

Awesome, see you there!

@williamherring5441 3 месяца назад

I travelled in to the future and learned that it is an S-10. By the way, you should paint a Ninja Turtle on the diff.

@johndempsey8643 Год назад

Bring the Comanche. We’ll be there.

@solomonstorment5532 Год назад

Both

@StormbornJKU Год назад

I’ve got a JKU with a 6 inch ram and I know I measured short. I could probably get 6.5 inches out of it. But honestly I’m probably better off at the 6 inches so that I’m not putting pressure on my pump, as well as not binding those U joints up even more. I’d love more steering angle though…

@dandahermitseals5582 Год назад

I've been wondering if I could put a power steering box from one of my Diesel F 250s. I don't want steering dedicated to two way hydraulic steering cylinder up cause if you have a failure u got no steering. Power box loses hydraulics you just have hard steering. Have you done that?? I have an 87 Comanche. Thanks Dandahermit

@kissane1980 Год назад

Bring the Comanche!!

@noeramirez3655 Год назад

MJ!

@williamenloe767 Год назад

The scorpion

@Weidjeep Год назад

My pitman arm puller looks just like yours only its from china and cost me 30$ on Amazon. Its an amazing tool that makes pitman arms a breeze.

@bleepinjeep Год назад

the conical versions are just over $60 now on amazon

@tomcompoli Год назад

Why did you not mount it off the upper link bracket? Keep it high and out of the rocks? Clearance issues? My Dana 44 highsteer was above the axle and fit fine.

@ephraimroger3029 Год назад

Hello bro, can you give the link you use cooler oil through steering box. Please.

@719Mitch Год назад

Hey colt, I have the full hydro kit without the new pump and reservoir because of cost. Can I drill out the pump like you did and run the full hydro successfully?

@dkhallal Год назад

Perfect timing, this is my next major upgrade on my 89 YJ. It has manual steering now. I know some folks use the Durango box as a slight upgrade, but I’m only gonna run 33s for now. What box will be best besides stock and can more than one model work or does it have to be off a YJ? I’ll be sending it off to Bleepin for the rebuild and drill for HA ports.

@bleepinjeep Год назад

The factory box should be fine. The Durango box is a popular upgrade, not sure if that works on YJ but maybe so. I once heard rumor it was just faster, not stronger... And then PSC has their own boxes as well.

@Skiridr22 Год назад

The jeep Comanche I haven’t seen it in action in awhile

@bleepinjeep Год назад

did you see this one?: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V5vRv2phov0.html

@1nf1d31 Год назад

Take the Comanche to Dayton!

@jerrycann6374 Год назад

When you change the steering box and start the engine first time after the changing it keep your hands and arms away from the steering wheel. If you do make a mistake and switch the lines on the box the steering wheel will violently turn back and forth.

@bleepinjeep Год назад

never seen that happen, I did do that once but it just bound up.

@jerrycann6374 Год назад

@@bleepinjeep I did on my 86 Grand Prix. I have a Borgeson Delphi box and made an error with the lines and the steering wheel jumped back and forth. I saw that happen on youtube before I screwed up so at least I remembered and still have all my fingers..

@jerrycann6374 Год назад

Rudy recently installed that style of hydraulic assist and commented on his concern for the exposure the assist has where it's mounted. He would probably like the protection for it that you fabricated.

@bleepinjeep Год назад

Guess we need to get Rudy to watch the channel more🤣

@timothycarey3883 Год назад

@@bleepinjeep i think rudy did full hydro.

@powerstroke01 Год назад

He did full hydro

@jerrycann6374 Год назад

@@powerstroke01 maybe so but I was talking about Rudy's concern for it being exposed.

@tomcompoli Год назад

@@jerrycann6374 he was too cheap to buy a proper skid system like TMR, Barnes, Ruffstuff etc sell

@paulhead Год назад

Maybe I missed it but what thickness washer for the pump valve/spring?

@terrywilliams437 Год назад

Like always great video...what size tire do you know you need hydraulic assist steering?

@bleepinjeep Год назад

I feel it really matters to your wheeling style but if you have a locker up front it's a game changer.

@jeremyolds4661 9 месяцев назад

Toyota and Nissan forklifts have full hydro steering that can be ran on a toyota power steering pump and im sure other's. I currently have 300$ in my truck steering and I'm running 15in wide 36's and can turn them no concrete with one finger at a dead stop.

@bleepinjeep 9 месяцев назад

Full hydro steering isn't road legal in most states. This is hydro assist because many states require mechanical linkage.

@jeremyolds4661 9 месяцев назад

@@bleepinjeep true true and its not legal in Ga either but luckily none of the states down here as long as we aren't directly causing danger to others I.E. speeding or running over stuff on one cares lol.

@nwliving Год назад

Isn't it better to go from the axle housing to the tie rod end on the passenger side ?

@gregeisenbarth2353 Год назад

Would you link or give more information on the bender set up and was that a tubing not her you said everyone should have? Thanks

@bleepinjeep Год назад

Tubing Notcher and Bender come from AffordableBender.com

@norcoredneck Год назад

Can you post links for bender and notcher in the comments? Thanks.

@robertquackenbush5547 Год назад

You sound like Paul from fabrats

@StandAloneAdventures Год назад

Is that a stock xj pump you’re drilling for more pressure?

@Handle4477 Год назад

Take both take both one for spare and I think that’s a Toyota from the 80s, hell I could be wrong.

@dustinb.9821 Год назад

Colt, is it better to use anti-seize as a lubricant on your pullers vs something like axle grease? Great video as always!

@bleepinjeep Год назад

I personally use antiseeze but I don't see why grease wouldn't work too.

@xplorationxj5138 10 месяцев назад

No!!! Antiseize has metal in it! Horrible idea. Should never be used in moving parts and the puller will see pressure in the threads and wear it out faster! Lost some credibility in the mechanical knowledge watching the video and seeing that.

@bradywilliams2666 Год назад

When you guys rebuild the boxes do you port it internally or just the drill and tap for the hoses? I've done the drill and tap thing and it didn't work that great. Problem I notice was the stock internal port were tiny when you compare it to a dedicated PSC tapped box.

@bleepinjeep Год назад

There are multiple 1/8" ports in a factory box and some are inaccessible. So no, we don't port the visible ones but are happy with the results anyhow.

@jakequaempts5234 Год назад

Scorpion crawler

@bartweiler1 Год назад

scorpion

@doug9418 Год назад

Bring the Jeep Cherokee. 🇺🇸 👍🏻

@Jan-pw4po Год назад

Scorpion

@Skiridr22 Год назад

Do you use hydraulic fluid or do you use regular power steering fluid in that system?

@bleepinjeep Год назад

Regular power steering fluid but I'd steer towards synthetic fluid like swepco or Lucas.

@zlanderson3378 Год назад

Is it safe to run something like this on the highway? At highway speeds?

@AJFAMMAN Год назад

SCORPION

@Golden-69 Год назад

Can't beat a Toyota part. Sheet the bottom side. Mother nature likes to touch things.

@frediefarmer Год назад

👍🏽🇺🇸👍🏽

@michaelteel4917 Год назад

" know what I mean Vern know what I mean ? Huh ? Huh ?"

@dandahermitseals5582 Год назад

Do you know if they sell an OEM tranny cooling lines replacement?? Mine are sweating. Of course -- Asian auto. Thanks Dandahermit

@bleepinjeep Год назад

im sure they do at any auto parts store, amazon, or maybe try rock auto

@elev8j10 Год назад

I remember as a teenager using a pickle fork on a pitman arm on a j20. Pretty smooth.

@Cougracer67 Год назад

Caution! If the pitman arm has been installed by Harry Hammerhand, the pickle fork will likely distort the housing around the seal snap ring so you can't change a leaking seal!