HOW TO MAKE CARBON FIBER LAMINATIONS TO BOW MAKING 

Using the thick glass plates for the lamination was VERY clever thinking and seems to have produced good laminates. My boat-building experience strongly suggests that if you see an increase in the number of customers who want carbon fiber in their limbs and/or risers, an investment in a vacuum pump, peel ply, etc. would quickly pay for itself in reduced labor, the elimination of "sticking and prying," and even better saturation and carbon-to-resin ratios. For the average amateur bow builder, however, your method is close to perfect. It MIGHT be worth experimenting with one or two of the more advanced mold-release compounds to see if the laminate would "let go" of the glass more easily than with the car wax (or whatever) that you used. Just a thought, Chris (Maine, USA)

Valeu Elison, obrigado por compartilhar este interessante processo. Com certeza no aguardo para o vídeo da fabricação do arco. Ótimo trabalho !!

Muito interessante esse vídeo. Vai ajudar muitos a fazer o seu próprio arco. No aguardo do vídeo de fabricação de um arco , utilizando estas lâminas. Parabéns.👏👏👏

no meu antigo trabalho eu fazia laminação de fibra de vidro e de carbono, apresentou um ótimo trabalho

Parabéns!!!! Ótimo trabalho!!!👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

Top demais!!! Com certeza quero ver a fabricação desse arco!!!!

5 coats of honey wax would have helped with that release, and I would have added a few 2-3 strands of uni down the center of each strip. Have a few layups to try once I get going, would like to vacuum bag mine eventually

Ótimo trabalho parabéns...agora quero ver o arco com certeza

Ótimo vídeo! Claro que quero a continuidade.

Very cool and really interesting thank you for sharing. Happy Easter. God Bless.

Muito obrigado por compartilhar conosco seu conhecimento.

Mais um aprendizado pra conta, muito show. Obrigado por compartilhar

Claro que sim, e ja compartilho

Excelente trabalho. Parabéns.

Muito top o seu trabalho 🤠 Gostaria muito de ver um passo a passo de um arco feito com essas lâminas

Conteúdo muito legal, esperando pelo vídeo do arco feito com essas lâminas

I like to see a full limb build with these carbon lamination, nice job!!!

Great video. What kind of resin/epoxy do you use on the fiber glass?

enjoy your show.yeah would love to see the bow finished

Show de bola. Duas dúvidas. É cera automotiva que tu usou para não grudar a resina no vidro? E depois usou solvente para limpar?

Nice one. May I ask some questions? Is that a warm dry chamber? There where you let dry the carbon fiber? And if it is, how many degrees is it set to? What kind of carbon fibers you used? And they were all the same or in different sizes? I'm talking about thickness, ecc. Thank you very much, but please: change music!😂🙏

this really coulda used some subtitles at least if you didnt feel like talking

We want it all. Make a bow man!😎

Com certeza eu quero ver

Valeu mano brigado pelas imformaçao

Hi buddy very interesting I tried once to make carbon sheets I put it on belly side it did not compress very well. Mabe if I put carbon in back side or middle of limb then it will work better and fiberglass for belly. How many sheets you used for this carbon sheet? And how thick did it came out? Great work live you bows. .

Yes !! 👏🏼👍🏼

Obrigado

May I ask, what are you applying onto the glass? Is it wax?

Show mano muito bom Mesmo

Very nice 🙂💯👍

Just subscribed. Love your work

thanks!

Yes

Perfeito like no video, qual a marca da resina epoxi que voce usou

Kool video... what type of resin or epoxy did you use for the cloth? And what was that spray and finishing polish? Thanks so much

What is different between high modulus carbon limbs(high end) and unidirectional carbon limbs(wns,samick,kinetic etc) i mean their spec..

Boa noite amigo Qual o tipo de resina que se usa para fibras de carbono e onde comprar as mantas? Forte abraço e obrigado

What kind of resin you used?

Na construçao do Arco com essas laminas se possivel gostaria sim de asistir o video se possivel

Muito top

What glue do you use to attach the carbon fibers?

Напиши пожалуйста, какой ты использовал разделитель? Чем обработал стекло? И чем обработал ламинат в конце ролика. Спасибо!

Plastic film layer added in mule avoid sticked part

Faz um longbow...

would look nice on a horse bow :P

Gostaria sim de mais imformaçao precisa como faser isso

Qual é o valor de um arco seu ?

👏👏👏👏👏👏

Como conseguir ou onde comprar esse tecido preto carbono por gentilesa se poder m ajudar fico muito agradecido

A vacuumed bag would be easier

Que Resina vc usou nessas laminas por gentilesa

What kind of wood did you use?

vc vende essas laminas??

alot cheaper to buy it made at 25 US a strip.. its also on the bias that makes it alot stronger against twist.

вопрос главный. НА ХРЕНА весь этот цирк?!?!?

I'm sorry, but most everything you did here is just not correct and possibly dangerous. I only hope you were wearing a respirator while dry sanding the carbon fiber 😬. Carbon fiber is a great material, but particulates and splinters can do some serious damage. Be careful.

Who else could see that greasy finger print after he degreased the laminates lol school boy error

It's made just like fiber glass. No biggie.