No video :(

How to Make: Cutting Board | ToolsToday CNC Video - Long Version

Подписаться 1,1 млн

Просмотров 231 тыс.

50% 1

Feed, Speed, Chip Load & Step Down CNC Running ParametersFeed, Speed, Chip Load & Step Down CNC Running ParametersMaking the Lake Life cutting board on my Stepcraft M.1000 CNC machine using Amana Tool® CNC router bits. www.toolstoday.com
How do you think it turned out?
Download and purchase the customizable plans here:
www.toolstoday...
Watch the short version here: • How to Make: Cutting B...
These bit did a great job cutting cherry going mostly cross cutting, left a few fuzziest cleaned up with the @gatorfinishing micro zip with 220g, but zero chip out great to see! I then filled it with @totalboat epoxy with @blackdiamondpigments_com Bora Bora blue. The board was finished with Walrus Oil Cutting Board available on our website and the cutting board was finished!
Feed, Speed, Chip Load & Step Down CNC Running Parameters
CNC Spoilboard Insert Carbide 3 Wing, Surfacing, Planing, Flycutting & Slab Leveler 1-1/2 Diameter x 1/4 SHK Amana Tool no. RC-2265
www.toolstoday...
RPM: 18,000
Feed Rate: 160ipm
Plunge Rate: 50ipm
Depth per pass: 0.02"
Solid Carbide Spektra™ Extreme Tool Life Coated V-Groove 60 Deg x 1/4 D x 31/64 CH x 1/4 Inch SHK 3-Flute Router Bit Amana Tool no. 45624-K
www.toolstoday...
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Max depth of cut: 0.22"
In-Tech™ Insert Carbide V Groove 90 Deg x 11/16 D x 21/64 CH x 1/4 Inch SHK Single Flute Router Bit Amana Tool no. RC-45711
www.toolstoday...
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Max depth of cut: 0.25"
Carbide Tipped Core Box 5/16 R x 5/8 D x 7/16 CH x 1/4 Inch SHK Router Bit Amana Tool no. 45914
www.toolstoday...
RPM: 18,000
Feed Rate: 70ipm
Plunge Rate: 35ipm
Depth per pass: 0.25"
Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 1-1/4 CH x 1/4 SHK 3 Inch Long Up-Cut Router Bit Amana Tool no. 46321-K
www.toolstoday...
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth per pass: 0.25"
Amana Tool 47306 Carbide Tipped Chamfer 45 Deg Angle x 1-19/64 D x 7/16 CH x 1/4 Inch SHK w/ Ball Bearing 3-Flute Router Bit
www.toolstoday...
Links **
Subscribe - / toolstoday
** Shop the website - www.toolstoday.com
** Like at Facebook - tinyurl.com/too...
** Follow on Instagram - / toolstoday
** Follow on Twitter - / toolstoday
Other links
Stepcraft M.1000
www.toolstoday...
Stepcraft M.1000 90° Vertical Clamping Fixture no. 11989
www.toolstoday...
Fein Turbo I Vacuum
www.toolstoday...
Walrus Oil Cutting Board oil item no. WO-CBO8
www.toolstoday...

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 145

@trumpetflowerII 10 месяцев назад

Great presenter; no shouting, no unnecessary music, no ego.

@ToolsToday 10 месяцев назад

I appreciate that!

@DKWalser 2 года назад

Thank you for an interesting and informative video. A quick point on woodworking terminology: When you used water to "pop the grain", you were "raising the grain". The only reason I mention this is because the terms "raise the grain" and "pop the grain" have commonly understood woodworking meanings. Raising the grain is a term that means using water (or a water based finish) to get the wood fibers to stand up so it can be sanded smooth (or, in this case, cut off on the CNC with a very light final pass). Popping the grain means using an oil finish to get the grain to 'pop' visually. It allows the wood to show off to its full visual potential. (A good example of this can be seen at the end of the video with the Walrus Oil is applied. It transformed the look of the cherry -- the grain popped!

@SmokinandGrillinwithAB 2 года назад

Thanks David :)

@daveklein2826 2 года назад

LMAO

@supernat1978 2 года назад

This is one of the best CNC cutting board videos I've seen, nicely done.

@ToolsToday 2 года назад

Thank you, I'm glad to hear that!

@justiceLaw0123 Год назад

This is so beautiful!! I think I found my dream job, buy my husband a CNC. Thank you for convincing me. I’ll tell him to watch you first.

@MakeSomething 2 года назад

Popping the grain and doing a final pass is a brilliant tip! Thanks!

@ToolsToday 2 года назад

Thanks David, glad it was helpful!

@SmokinandGrillinwithAB 2 года назад

I agree!

@eitantal726 2 месяца назад

Tip: If you don't have a bowl cutter (I don't), you can use a profile toolpath with a ball-nose

@MrSaltydevildog 2 года назад

LOTTO life for the WIN.

@zacharyshaver4325 6 месяцев назад

Fantastic video

@marcovelez942 2 года назад

Gorgeous! The board came out looking amazing

@ToolsToday 2 года назад

Appreciate that!

@daveklein2826 2 года назад

Love that router table jig

@ToolsToday 2 года назад

Thank you!

@gs121002 2 года назад

You are making me want to upgrade my CNC router!

@rickpouley2857 Год назад

Great cutting board!!! I love your jig.. Great idea!!

@13daniel1974 Год назад

Nice try on the microjig sale...LOL. Cool project. Thanks for the info

@ShopperPlug 2 года назад

Nice cutting board at the right size.

@woodcrafthomeideas1109 2 года назад

Hello

@givaribeiro3968 2 года назад

Trabalho maravilhoso, parabéns ao maquinário. A beleza da arte em madeira é o trabalho manual.

@f1pitpass Год назад

good stuff!

@ToolsToday Год назад

Appreciate it!

@ericpuffer3359 2 года назад

Great looking cutting board. I miss those lakes, a lot of good times! I was at Ft. Wood for awhile 💚🇺🇸💚!

@ToolsToday 2 года назад

Thanks!

@edwardsimmons3721 2 года назад

Great project. Did not get to see the lake though. Popping the grain twice was a great tip.

@ibeauf 2 года назад

Just curious, why couldn’t you cut the text first, a little deeper than usual, and then run the flattening pass after the epoxy is hardened? That way you don’t have to worry about getting the tool at the right hight or sanding to level, just sanding it to a smooth finish once done

@bahlowme 2 года назад

I thought the same thing.

@jasonasselin8657 2 года назад

So that you can seal the engraving. Coloured epoxy likes to bleed into the grain where you dont want it to go and can ruin the crispness of the text. Ideally a rough flattening, then text, seal, pour, then full flattening.

@ibeauf 2 года назад

@@jasonasselin8657 Ok that makes sense, in that case could you cut the text deep, seal it, blue epoxy, 1 flattening pass and 1 sanding pass and done? This would bypass the z axis offset and extra sanding on the letters

@stepcraftgermany 2 года назад

Beautiful project Matt. Great job! :)

@ToolsToday 2 года назад

Thank you!

@cokimi1301 7 месяцев назад

So for the next it would be better to use a 0.1 offset during the last profile passes and then one last single full depth cut to remove the 0.1 offset and all the lines with it for that perfect finish.

@isaacsgarage931 2 года назад

For Z offsets, I use a precision 123 block. Really quick and super repeatable. I drop the tool below the 123 block and move it up until I cannot feel the tool while moving the block, then back down .001". From there is easy to tell I'm 1" above my work(or WCS) and I can offset a couple thou if needed in a controlled way. Highly recommend over the paper method.

@ToolsToday 2 года назад

Thanks!

@RiseUp_Again 2 года назад

Beautifull Piece of Artwork

@irishful1 2 года назад

it LOOKS nice but will cup like mad within a year, did a similar table and its more like a shallow bowl now.

@CesarPereiraancamilla-vt7qr 9 месяцев назад

Hermosa tabla para cortar

@GeorgeKennerLaser 2 года назад

I am loving my M1000.....

@JF32304 2 года назад

Very nice! Well done!

@zafarahmed6754 2 года назад

Only one word wonderful

@bennie026 11 месяцев назад

Looks like the machines made it

@azizqassim9257 2 года назад

Thank you.. that was awesome

@derekdodson5623 2 года назад

Very cool video. I enjoyed watching your process. Thanks

@silvertonguedaywalker9116 2 года назад

Just t beautiful. I am watching this for the first tine. I know nothing of what you say lol. Fab Vlog. So much info. I guess this machine cost a packet. x We move in a few years and we want to start working with wood. X Do you have an .more Vids to see what this baby can do.. . Cheers.

@ToolsToday 2 года назад

Thank you, please click here for more CNC videos www.toolstoday.com/t-tool-videos

@daveklein2826 2 года назад

Walrus oil is the best

@warwicknation4945 2 года назад

Can you do a video on the vacuum table and vaccum you use please.

@jmack423 2 года назад

Great job nice board! " which is exactly what we want"

@today_not-yesterday 2 года назад

Огурец тоже надо было порезать на станке с ЧПУ, а то неодинаково получилось. :D

@PSModernKitchens Год назад

Great

@StevenDavisPhoto 2 года назад

Great video. Except when routing a rectangle, you should always start with a end grain side to prevent tear out.

@ToolsToday 2 года назад

Interesting we can try that too! Thank you

@leehaelters6182 2 года назад

@@ToolsTodayelementary craftsmanship.

@ViverPeloMundo 2 года назад

Ficou Top Parabéns

@Zsasz2 2 года назад

great job. One question, the epoxi dont be toxic in contact whit food?

@ToolsToday 2 года назад

Thank you! No, once it is cured it is non toxic to food

@Nate-lw4hv Год назад

What do you charge for that cutting board? Do you do custom orders as well? I’m not too far from you in Russellville 😀. I would love to be able to make a board like this, but I don’t have any equipment to do it with. You make it look so easy, but I know there’s a lot of planning that goes into each build.

@yehezkielwayor6654 2 года назад

I really like your work bro👍‼️❤️💯☺️

@ToolsToday 2 года назад

We appreciate your comment, thank you!

@rufustoad1 2 года назад

Nice job. Question, what is the pigment brand your using?? Just a quick tech tip. Rather than removing the 2nd piece of tape then having to rezero your machine and taking these extra steps just hit go to zero, then command Z-.005 OR ??? and then zero the Z axis. Just a little quicker and a bit more accurate.IMO but still great job.

@mavigogun 4 месяца назад

I can't look past the cracks and inclusions- especially on a surface used for food prep.

@EdiCNC 2 года назад

Ótimo trabalho

@jezaelp 2 года назад

Awesome work. Love the way you deliver the information in the content. Saving money for my setpcraf. I have a question on this machines they have a page with offsets for each tool on the rack or you have to take a reference every time you want to adjust the reference. You adjusted your ( z ) what other way to do it ? Great work like all ways. Blessings from Cypress Texas. Your amigo ( friend ) Jesse.

@ToolsToday 2 года назад

Thanks so much for the kind words. Yes, there is an offset feature, so I measure all tools off the touch off probe, then measure tool 1 off of the material and it sets the z-zero position for all of the other bits automatically as it knows the difference in length between each bit.

@jezaelp 2 года назад

Thanks so much for taking the time to answer. Enjoy your day and your family.

@rpestill 2 года назад

This is perfect timing. Thank you for the video. How fast are the letters engraved? (feed/speed).

@ToolsToday 2 года назад

Amana Tool no. 45624-K 60 Deg V-Groove RPM: 18,000 Feed Rate: 40ipm Plunge Rate: 20ipm Max depth of cut: 0.22"

@jezaelp 2 года назад

Very good information thanks for sharing.

@ToolsToday 2 года назад

@@jezaelp Very welcome!

@rizwanwaris3587 Год назад

Which cnc are you using, I mean company and model no. Same for router table please.

@garyisnow46 2 года назад

Hi Good video & really well explaned. I am in the Uk and i want to purchase the 60 v bit Rc - 1145 which uses the insert replaceable blades. I have the 90 degree version and love it. I can purchase the 60 v bit on Amazon uk but unlike the 90 degree version i cannot purchase the blades for the 60 v bit on Amazon uk. Can you tell me where can i purchase the 60 v bit replaceable blades ? Thank you. Gary

@ToolsToday 2 года назад

good day, yes you can purchase them here, www.toolstoday.com/v-9367-rck-56tt.html

@Glorious_Kim_Jong_Un 2 года назад

Do people who not live on lakes buy these and wish they lived on a lake?

@mesquitamk1681 2 года назад

very good your work. friend, please give us the link for pneumatic support and cutters I live... in Brazil and I'm starting now in cnc

@celsoribeiro7413 2 года назад

Boa tarde, ótimo trabalho, essa sua cnc qual fabricante? Sou do Brasileiro!

@georgeyetka7689 2 года назад

Matt when is toolstoday going to start some beginner cnc courses?

@ToolsToday 2 года назад

We try to make videos for all ranges, we have some beginner videos on our website video page here, www.toolstoday.com/t-tool-videos

@joem2209 2 года назад

How long did you let the epoxy set before skimming it off?

@ToolsToday 2 года назад

I let it sit overnight, so about 12 hours

@rameshrk7531 2 года назад

Which toolpath are you actually using for vbit... Because your machine running forward and backward same pass....

@CoffeeAdventureTraveler Год назад

Matt we are newbie, without a vacuum table to hold the cutting board blank, how do you suggest to hold the board to the T-Track spoiler board? What clamps?

@remolabarca56 2 года назад

Sarebbe interessante sapere come programmi i percorsi utensile sul computer.

@josejimenezgarcia5824 2 года назад

I can't find the link to the router jig

@woodcrafthomeideas1109 2 года назад

Hello

@JowfeStudio 2 года назад

HI THERE, HAVE YOU TUTORIAL VIDEO ABOUT DESIGN AND SEND LETTERS TO CNC MACHINE PLEASE?

@TimberWood.Customs Год назад

What feeds and speeds and depth of cut are you using

@ToolsToday Год назад

All speed and feed information is available in the description of the video as well as in the plans for this project.

@triumf5676 2 года назад

what kind of glue are you using to make the cutting board

@xmstr4553 Год назад

Can you share your rpm and feed rate on these tool please?

@ToolsToday Год назад

All are listed in the video description.

@xmstr4553 Год назад

@@ToolsToday sorry i did not notice. Thank you so much😊

@boredymcboredface8624 2 года назад

Is epoxy food safe ?

@J1I9M7M4Y 2 года назад

Really beautiful work. Would it be possible to make a text inlay like the one you did, but with brass that you cut out on the router?

@ToolsToday 2 года назад

Absolutely!

@ToolsToday 2 года назад

Look here, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TMG3mnlUimk.html

@juliavallo5720 2 года назад

What software do you use with the Stepcraft CNC?

@mesquitamk1681 2 года назад

friend, what is the name of this pneumatic clamp frensa. How do I install it on my cnc? You have video installing

@philipgabor9013 2 года назад

What is that white spacer on your spindle?

@twistedworxengraving7920 2 года назад

I have been looking for a machine just like this one!! What model is it? And what attachments were added?

@ToolsToday 2 года назад

It's the Stepcraft M.1000 with the ATC and Vacuum table options as well as the vertical clamping jig. Here's the links to them.

@ToolsToday 2 года назад

Stepcraft M.1000 www.toolstoday.com/stepcraft-m-1000-cnc-system.html Stepcraft M.1000 90° Vertical Clamping Fixture no. 11989 www.toolstoday.com/v-15266-11989.html

@twistedworxengraving7920 2 года назад

Thank you for the info! I appreciate it!!

@woodcrafthomeideas1109 2 года назад

Hello

@woodcrafthomeideas1109 2 года назад

Hello

@MrLucaR80 2 года назад

the knife used at the end to cut the cucumber doesn't work so fine. you should sharpen the blade :-D

@nioldo3394 2 года назад

Is something like this also possible with a stepcraft HF 500 spindle? With the same tools?

@ToolsToday 2 года назад

Hi Nioldo, yes you can make this with the HF 500 spindle.

@robertsmithUH60driver Год назад

What router table did you use?

@ToolsToday Год назад

I used the JessEm Ultimate Excel II Router table - www.toolstoday.com/jessem-ultimate-excel-ii-package.html

@Bcam4 2 года назад

Can you tell me all the options you have on your m1000. I want to purchase one and I am not sure what options I should get example precision ball screws, stepper motors with semi-closed loop system, vacuum bed, etc. I will be only using the cnc for wood products. Thanks!

@ToolsToday 2 года назад

Hey Brian, it's all going to depend on what you're wanting to make. Please email ttsupport@toolstoday.com and we will get in touch to chat about what will be best for you.

@hayabusa3558 2 года назад

What is letter font do you use for this ? Thanks

@laplanteb67 2 года назад

Also interested in the font

@andydreier9772 2 года назад

what design software are you using for the fonts?

@gayahidup603 2 года назад

what brand of cnc are you using?

@alex23670 2 года назад

стоило ли оно такой трудозатраты? да и на вид полный шлак, можно было более простыми методами сделать куда интереснее.

@samireramos1845 2 года назад

Como é nome dessa máquina

@user-hz6fw4wm4f 2 года назад

Сколько стоит такой станок друг? И как такой купить?

@Pro_Deep 2 года назад

I want to buy that cnc machine.

@woodcrafthomeideas1109 2 года назад

Hello

@woodcrafthomeideas1109 2 года назад

Hello

@Pro_Deep 2 года назад

@@woodcrafthomeideas1109 hello?

@eitantal726 2 месяца назад

The trouble with cutting boards that are too pretty: No one wants to use them

@kimsmet-woodworksbangalore7343 2 года назад

Good tips thanks. But plans available for a cutting board 🤣🤣🤣.

@xselcer 2 года назад

May I ask how thick that cutting board was? I have the same machine and am thinking about purchasing a couple of the bits you showed but I don't get a lot of height clearance when I have the table in the top configuration. I don't feel I would have room to use that long upcut bit in that configuration.

@ToolsToday 2 года назад

It was 1.5" thick

@bk3132 2 года назад

What feeds and speeds and pass depth did you use on the profile cut? And was it the mm1000 DI spindle?

@TheAlogoc 2 года назад

When you cnc handles out... Do you need to write a program for that or you can just do it in the machine operation system? I am new to cnc... 🙂

@ToolsToday 2 года назад

I set up a toolpath for it. I suppose you could do it without one, but it's easier and more accurate to just set up a toolpath for it

@TheAlogoc 2 года назад

@@ToolsToday suscribed

@ToolsToday 2 года назад

Thanks for subscribing!

@yousufagha6907 2 года назад

What is the price of this machine

@yousufagha6907 2 года назад

Price?

@alysaleh8987 2 года назад

Question please... The link to the cnc machine page comes back to 404 and its not showing when searching the website. is it moved and/or no longer available ?

@ToolsToday 2 года назад

The link is for USA customers only, sorry.

@reinhardmantik2749 2 года назад

👍👍🙏🙏

@woodcrafthomeideas1109 2 года назад

Hello

@MrNetAble Год назад

only unresponsible tradesmen can use epoxy on food board.

@abdultairu 2 года назад

My only advice for you is to stay out of the kitchen, you are an excellent woodworker, but from the way that cucmber turned out after cutting, you are better off in a wood workshop. Jokes!!!

@Nate-lw4hv Год назад