No video :(

How to make Hoop Stove

Подписаться 60 тыс.

Просмотров 474 тыс.

50% 1

This is how to video of Hoop Stove. Making is troublesome job and difficult, but has the best usability in the field. If you want to make a good stove, there is a need to spend time and effort. You can reduce primer time. There is no need to carry extra fuel for primer.
開発を進めてきたHoop Stove(輪っかストーブ)が完成したので作り方を公開します。製作はとても面倒で大変です。良いストーブを得ようと思ったら、手間と労力を惜しんではいけません（笑）　そのかわり現場で優れたユーザビリティを発揮し、予熱の無駄な時間と燃料を削減することができます。
BGM information
Artist : L-side Music : 風雷神
Artist : R-side Music : Lateral Walker
www.hurtrecord....

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 176

@SakoTGrimes 10 лет назад

I made a similar one. But I used a razor blade to cut the cans, which did not fit together as well as I would like, and dull pins to make the jet holes. The work and precision this guy puts into this rather simple stove is an example of why Japanese cars grew to be vastly superior to American cars. Japanese make some fantastic stuff.

@tetkoba 10 лет назад

Thanks comment. This stove is very complicated design. Improved version is Capillary Hoop Stove. Pls watch CHS video too.

@awatt 6 лет назад

Can't believe it's six years since I made one of these. It works flawlessly and has got a lot of use in all sorts of weather conditions. Came back because it needs a few repairs. I used very thin ali for the leg supports and they need replacing due to cracking. Considering I used it in a daily basis at work for about eight months it's held up quite well

@garikezov1265 Год назад

Похоже на талантливого стоматолога. Без работы никогда не останется😊👍!!!

@SpencerWil 12 лет назад

The new holes really made the difference. I am now getting very close to the results that you do. Thank you for the video and the advice.

@iFrndlyfire 10 лет назад

as an engineering student, and an avid outdoors-man i find this as something i will enjoy making!

@bikerdave19148 12 лет назад

I have to say, it's a real pleasure to see someone who likes figuring things out physically, and worries so much about craftsmanship. VERY well done. I've made basic can alcohol stoves with just pinholes and they work pretty well but this is very VERY nice. I like your petal stove as well but this looks less complicated and likely works better too.

@rid. 5 лет назад

This video is from 2012🤦‍♂️and I haven't seen it . Verry good thanks a lot . Time to try it 🤝🗜🔧🧰

@Isheian 11 лет назад

あなたはこれらの現金の負荷を作る売るべき！どのようにしてくれてありがとう！〜アメリカのファン

@KGB240 12 лет назад

This is an amazing stove. I appreciate the fine detail on this video to the fullest extent. Thank you very much for taking the time to show each step and for sharing your creativity.

@SpencerWil 12 лет назад

I am using carbon felt. I'll have to get a .8mm bit. I hope that fixes it because I really like this design and the performance you are getting is amazing. Thank you for the help and your contributions to the alcohol stove community.

@srrrr11 12 лет назад

I have that same circle cutter you use. It makes DIY stove making so much easier.

@pauldude000 11 лет назад

I have built innumerable Pepsi-can type stoves of various styles and descriptions and can say this..... VERY nice job. Good innovation, clean techniques, and efficient metalworking skills. Nice stove build dude.

@kennyhernandez1905 7 лет назад

Very, very nice work. Can't buy anything that well made & beautiful. I appreciate any thing made by hand.

@bluejeans8001 12 лет назад

Excellent "How to" video. I may give this one a try and see if I want to trade in my canister stove for this one. Thanks for making such innovative stoves and sharing them with us.

@upanishad9995 9 лет назад

天才的！　見ているだけでホレボレします。

@tetkoba 9 лет назад

Upanishad999 コメントをありがとうございます。燃焼方式としては既存のウィックジェットの域を出ていないんですけどね。ここから新しい方式であるCHSへとつながっていきます。

@egn83b 11 лет назад

Wow what a craftsmen. I think this is amazing. This is amazing to take complete garbage and turn it into a complete retail able piece of work.

@KyCuJe 11 лет назад

The only one I don't have is the one he used to cut the top opening with, but I have a hardware store a couple blocks away that likely has one. Pretty easy to get these. If you fix anything around your house at all, you have at least half of them.

@Burps___ 12 лет назад

So precise. Not a missed step. Well done.

@geraldhenrickson7472 9 лет назад

Amazing design, good color flame. You make the construction look so easy! Thanks for the video!

@dutro76 12 лет назад

発想の先進性、丁寧な加工法、分かりやすい解説ビデオ、など多くの面でも素晴らしい！　小径缶のほうが、早く缶全体の温度上昇が出来る。立ち上がりも早くなるのかな？ｂｙ　JSB

@SURA19810411 11 лет назад

素晴らしい出来上がり！この動画を参考に手作りしたいと思います！撮影&投稿ありがとうございます。

@effyleven 11 лет назад

What a superb little stove... and what a SUPERBLY MADE video, too! Congratulations to tetkoba... (also, many thanks)

@leonlynes152 11 лет назад

Attention To Details... craftsmanship... artistically done... I will Buy that one!....

@yonigpoit 9 лет назад

Dude! I love the precision and engineering on this stove...The music is great on your video and how do I get your amazing tools!!!!???? Great video and stove!!!! Thanks for sharing!!! I'm going to make this but I will have a dull butter knife and a rock for tools :-) All kidding aside, I'm not sure how to get a hold of "Carbon felt" here in the US, so I'll try fiberglass insulation to see if that works. Hopefully it will wick the alcohol as efficiently as your carbon felt does. I'll let you know!

@chunkyfecalbreakfast 11 лет назад

You are a very skilled craftsman

@KOSmichny 12 лет назад

зачем так всё усложнять? всё должно быть просто и практично как АК-47))) Видео классное конечно же.. Успехов)

@ScoutsNOA 11 лет назад

What craftsmanship.......

@llm7676 12 лет назад

this is pretty awesome, ive always just made the typical coke can...but this takes it to a whole new level of ingenuity. I'm too lazy to make yours lol kudos my friend!

@2dividedby3equals666 12 лет назад

Thanks for the amazing video. As you said it is time consuming but it is worth the effort. The tutorial was very well explained, it will be very usefull. I'm looking for the next vid, take care!!

@mariadelmargilgonzalez255 5 лет назад

Very nice...I have got too a DIY alcohol stove .....saludos de BILLIG CAMPER desde Alemania.

@boowonder888 11 лет назад

This was great engineering with simple materials, well except some of your cool tools, I guess. I saw your other vid where it burns, great! Im gonna try making on for myself. First I need to buy a few Pepsis..... Excellent!

@haggerdcreek 10 лет назад

amazing craftsmanship ...truly a thing of beauty !!

@charles910 11 лет назад

Beautiful stove. But too much work and parts not found around the house.

@spanielgita 12 лет назад

brilliant, professional how-to! Very well done mate!

@RonRay 12 лет назад

Once again, genius design!

@Anbuccoy 12 лет назад

You are the master. i would like to buy one since i do not have the craftsmanship to make one

@aephix73 12 лет назад

You can get carbon felt at Home Depot. It's called Flame Protector by Oatey. About $16 for a 9"x12" piece.

@ANTONIOSALGADOCAMPINGCASTOR 11 лет назад

Tetkoba: ¡you are a master of the stove¡¡¡

@321RCHeli 11 лет назад

A stable base, fast self starting, center flame, efficient and a TORNADO. What more could you possibly want?

@Warpedguitar28 12 лет назад

idk if you were talking about the very bottom of the can but if so it was cut with a compass cutter

@johnarizona3820 12 лет назад

Brilliant demonstration bro! TY for posting. God Bless

@Syncubus 12 лет назад

Fantastic craftsmanship! Thank you.

@misterkindsir 11 лет назад

So much accuracy! Excellent work! You should sell these to make a nice profit! Very good quality. MrKindSir

@NavyPLN 12 лет назад

Все красиво, но только после первого похода будет помято и быстро развалится, такое делают на один раз, а не так долго и красиво ) горелка из алюминиевой банки не практична ) А так хорошо ))

@aparecidomiranda1191 2 года назад

Parabéns ótimo vídeo

@Kevins-Philippine-Retirement 8 лет назад

Great quality work, as usual for you. Thank you

@clockguy2 12 лет назад

Very nice work, but you really need to look up the "fancy feast stove". It costs about $0.39 US and took me about 10 minutes to make.

@aaAlexVieira 10 лет назад

WOW ! REALY PROFESIONAL. AMAZING.

@tetkoba 10 лет назад

Thank you! This is very hard to make. I believe CHS-U(capillary version) is much easier.

@dalriada842 12 лет назад

Elegant design!

@iMatt65 12 лет назад

Keep up the hard work and excellent designs!

@Kanoee64 12 лет назад

Awesome Craftsmanship !!!!

@Druetty 12 лет назад

Excellent, as always! Thanks

@Road.Tripping 12 лет назад

I've said it before but you are an artisan. Beautiful work and a great stove. One question: if it is hard to find a supply of carbon felt could fiberglass be used in its place? I have some narrow fiberglass may available Thanks again and I look forward to your next video! Kerri

@Knifeguyyy 12 лет назад

Your work is always so amazing. Thanks for sharing!-)

@Wikipunani 12 лет назад

OMFG but this complicated to make HELP US GAMERA! Is this unit actually a serious contender in a bushcraft scenario?

@phillwhiting9999 9 лет назад

you should sell them mini stoves on ebay, some neat stuff dude gunna make one

@SpencerWil 12 лет назад

I built my stove very carefully to your specs (although I did the holes closer to .6mm diameter) but I am getting a boil time of over 8 minutes. Should I change the number of holes or the diameter? Or change something with the carbon felt?

@silvermediastudio 12 лет назад

You should be able to ship from Japan for about $15 USD. I have had products under 2 pounds shipped from HK to USA for that amount and no problems with customs.

@dontmesswithnature 11 лет назад

very well done

@m8teseven 12 лет назад

Amazing work , it"s a pleasure to see such fine art and creativity. Question , can i use expoxy resin instead of JB Weld ?

@vieldcs 11 лет назад

learned a lot from this video

@khalidyousuf7938 4 года назад

Please show us some ideas on windscreens please. Thanks in advance

@user-qn6hq5re2u 8 лет назад

tetkoba's you are amazing dude !!!!!!

@anubitsa7799 11 лет назад

wow..it's masterpiece., you are MacGyver.

@loonytik25 12 лет назад

When you cut the pipe ends do you angle them in the same direction as the holes in the top piece?

@evabuchberger5787 11 лет назад

another question... it is more or less impossible to get carbon felt in germany... [ I would love to be proved otherwise] would mineral wool like stone wool work in the pipes, too?

@gumonthepants 11 лет назад

I see sheets of it also on amazon.com as well as his hand drills and circle cutters.

@RiotShooter75 12 лет назад

Do you think this design could be adjusted to work with a normal size can (12 fl oz)? If so, what modifications would you recommend?

@wanderfoottv5484 11 лет назад

it would be great if you could make one for me...=) i love what you did!...=) very well done!!

@cesarcardenas1457 12 лет назад

its cheaper to buy the stove than buying all the tools needed to make the stove!

@papercut9000 11 лет назад

take a look a that stove, oh what a stove... well take a look a that stove oh stove, stove stove

@BirdOfParadise777 12 лет назад

By the way... what did you do with the "wicks" that were sticking out of the tubes when you put it together? Did you push them down into the tubes? Thanks:)

@davidm4160 11 лет назад

Nice video, thanks for sharing, how about showing it off in action?

@jumpoffa5011 9 лет назад

Brilliant job!

@MahmoudMosleh 11 лет назад

very accurate and nice thanx

@evabuchberger5787 11 лет назад

is there a way to combine the carbon felt hoop technique with a pressurized jet alcohol stove system? like the penny stove.... and would it be in anyway useful? and working?

@Resonant2Frequency 12 лет назад

Hi Tetkoba, since you are very good at building such small light and efficient stoves, would you have any suggestions on making a efficient wood gas/gassifier stove? I built a stainless steel one of a top lit updraft type/tlud, but quite heavy, and goes out far to easily(there is some blue flame though). Be great to have a lightweight(ish) one that is as pretty as your stoves! any ideas?

@jitukelkar 10 лет назад

neat project well executed!!!

@JPintheNC 11 лет назад

I meant, what is the total lifetime of these stoves before they no longer work properly.

@hyperguy75 11 лет назад

Great video!

@poikilo1120 11 лет назад

tetkoba I am trying to buy the materials needed. Just to confirm a bit. Is Carbon Felt those activated carbon felt used for filtration? If possible, please provide a link of it.

@Fu3R4 12 лет назад

What are the tools your'e using? The mini drill and scribes you used to cut the cans? Product names perhaps as I'd like to get some.

@sunnyarky 11 лет назад

Great!!! Nice job!

@MrTomas3000 12 лет назад

They are in angle but I don't have carbon felt I only have steel wool is that the problem maybe

@ssijon 11 лет назад

Can you use Copper tubing instead of Aluminum? I have copper, but no aluminum...

@BirdOfParadise777 12 лет назад

OMG! You are a ginius! Thank you! Thank you! :) Is that the only way to remove the coating? How long will it burn with the amount of fuel it will hold?

@05generic 11 лет назад

Do you have any designs that do not require the specialized tools to make?

@BirdOfParadise777 12 лет назад

You use "mini cans"... in the US, what would be the equivilant size can for me to use? Or, what is the measurements of the can you use? Thank you:)

@Mirarelief 11 лет назад

Ain't Nobody Got Time For That!

@ploetzlich30 12 лет назад

hello tetkoba. can you please tell me, which of your stoves is the best for bakeing heatwise and burningtime?

@learnonedooneteachone3822 Год назад

I watch all your videos. I love the can cutting jig. I appreciate you and your work.

@heruthfull 11 лет назад

Tetkoba-San...i can't found carbon felt,,,can i change it with steel wool wick? And can i use steel wool wick in "trangia remodeled-coil jet stove" ? thanks