No video :(

How To Make MOGAMI GOLD Audio Cables and SAVE THOUSANDS

Подписаться 1,7 тыс.

Просмотров 10 тыс.

50% 1

Mogami XLR cable video is out now! → • DIY Mogami Gold XLR Ca...
Cable Making/Soldering Gear: kit.co/semyonm...
My first sample pack The DRUMS Vol. 1 is out now! → www.soundsbyse...
Make you own Mogami gold TRS cables! For the longest time, I bought cables at the store like most. Then when I upgraded to Mogami cables, I could not believe how expensive they are. Well I quickly learned that I could easily make them myself at home by buying Bulk Mogami cable and all the parts/connectors, and putting it all together at home. This method is 4 times cheaper and in this video I'll show you how you can wire your music studio for a very low cost with high quality audio cables!
0:00 Intro
1:15 Why Mogami?
5:34 Tools
6:28 Making The Cable
29:12 Outro
► 📧 Contact
contact@semyon.ca
► 🧍Socials
Instagram: / semyonmusic
TikTok: www.tiktok.com...
► 🎹 Gear
All Gear: kit.co/semyonm...
Music Gear: kit.co/semyonm...
Studio Essentials: kit.co/semyonm...
Lighting: kit.co/semyonm...
Video Gear: kit.co/semyonm...
Hard Drives: kit.co/semyonm...
Cable Making/Soldering Gear: kit.co/semyonm...
►🥁 Sample Packs
www.soundsbyse...
My first sample pack The DRUMS Vol. 1 is out now!
►🎙️ Work With Me (Production/Mixing/Mastering Services)
www.producedby...
*Disclosure: if you use the links above to buy the gear I use and recommend, some of the links are affiliate links which give me a small percentage, which helps support the channel!
#musicproducer #musicstudio #music #producer #homestudio #homemusicstudio #musicgear #analog #audio #audiocables #tutorial #mogami #mogamigold #musicproduction #musicproductionlife #musicproducerstudio #mixing #mastering #mixingmusic #soldering #solderingtips #audiocable #TRScable #savemoney

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@Semyon_Music 8 месяцев назад

For those who asked, the XLR version of this video is out now! → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nL063d-J__o.html

@soapboxearth2 Месяц назад

Before you twist the copper ground strands together , separate them in two bunches. Twist them together once so that you have a twisted section next to the rubber and two groups of strands. Then tin them where they're twisted. Then you can cut one bunch off and have a smaller lead to solder.

@Semyon_Music Месяц назад

Thanks for the tip!

@Stelios.Posantzis 3 месяца назад

0:15 People complain about the price of good patch cables but, in actual fact, it is the connectors at the two ends that make up for most of the cost (for usual lengths found in home audio or even in studio systems).

@Semyon_Music 3 месяца назад

Very true!

@XTheCreator Год назад

Can you please make another how to make video but this time an with xlr cables. This video was awesome and clear!

@Semyon_Music Год назад

That’s a great idea! If I get enough comments to make an XLR video, then for sure!

@Semyon_Music 8 месяцев назад

Just released the XLR cable video! → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nL063d-J__o.html

@PurpleMusicProductions 4 месяца назад

This was extremely helpful. I am ordering my kit today.

@Semyon_Music 4 месяца назад

Glad the video was helpful!

@TheDaizM Год назад

this was helpful. thank you

@Semyon_Music Год назад

Thanks!

@peterst-uh5me 3 месяца назад

Very well explained step by step Semyon! Any chance you show how to make a RCA mogami cable? Thanks a lot. Best, Peter

@Semyon_Music 3 месяца назад

Maybe in the future! RCA is not a type of cable I typically use. I only use XLR, TRS and TS cables at the moment

@jordanruiz 6 месяцев назад

Great video and solid tutorial. To me, it still seems like a good amount of work to get the cables for half price or so. I do think it would be worth it to build your own, if not for the lifetime warranty when you pay retail. That kind of justifies the price premium to me; knowing it's the last instance of this cable I'll ever buy. But if looking to save some money in the short term, this is a great option.

@Semyon_Music 6 месяцев назад

Definitely easier to buy premade if it’s 1-2 cables but you need need 15-20 cables, the cost adds up! The difference could be $2,000 vs $400 and 1 day of soldering

@PurpleMusicProductions 4 месяца назад

@@Semyon_Music I agree. If you are building a studio, then retail is not feasible.

@Semyon_Music 4 месяца назад

@@PurpleMusicProductions 100%

@AdamsOlympia 2 месяца назад

It *might* be hard to justify over buying World's Best Cables that use Mogami cable and the same ends for 10-15 dollars more or whatever they go for. I don't yet own any quality cables, but planning to upgrade soon. I'd have to buy all the soldering equipment and cable cutters, so WBC would probably be more cost effective for me -- though I don't yet know if there are any tradeoffs/caveats with WBC.

@roo1538 Год назад

nice video

@Semyon_Music Год назад

Thanks!

@Projamusic 6 месяцев назад

What is maximum length for trs to xlr cable for no signal change? Thanks

@Semyon_Music 6 месяцев назад

You could easily go up to 30 feet or longer with no signal loss with these cables

@Eric-pz6mo 8 месяцев назад

Hi, i got the cable you mentioned. The cable has writing on it that says "NEGLEX 2534 MICROPHONE CABLE", is this going to cause any problems using it at line levels instead of mic levels? Can i use it in a guitar rig?

@Semyon_Music 8 месяцев назад

Should be completely fine for line level. If you plan on using it as a guitar cable, mogami makes other makes suitable for specifically

@Eric-pz6mo 8 месяцев назад

@@Semyon_Music awesome, thank you!

@Semyon_Music 8 месяцев назад

@Eric-pz6mo have fun with the cable making adventures!

@finkployd6110 10 месяцев назад

I'm curious as to why you're using four core cable instead of dual core cable.

@Semyon_Music 9 месяцев назад

It’s prevents unwanted radio interference from getting into the audio path during longer cable runs

@Nig6tWalker 4 месяца назад

great video but post the the website to order the cable and the connectors

@Semyon_Music 4 месяца назад

Thanks! And there are links in the description!

@Nig6tWalker 4 месяца назад

@@Semyon_Music mi bad i just found the link,thank you

@andrewbradt984 Год назад

Where are you buying the wires and connectors from? Are you buying them in bulk? I have some TRS snakes that are a little short for my new setup and thinking of doing this, but, the materials are more expensive than I expected. For the gold TRS connectors, I'm not finding anywhere to buy them in bulk and they start at ~$9.50 CAD each.

@andrewbradt984 Год назад

Also, I'm looking to make a variety of cables within 4.5ft-6ft in length. Have you made cables around this length before? I'm wondering if going for the W2534 Neglex Quad is a little overkill for my use case.

@Semyon_Music Год назад

In Canada, Studio Economik is a great place. Ask for Nicolas and he can give you a good deal for bulk orders

@danacrooker1282 8 месяцев назад

Where can I get Mogami Gold cable (unterminated)?

@Semyon_Music 8 месяцев назад

There’s a link in the description of the video!

@TeleTonemonkey 3 месяца назад

What’s DYI?

@Semyon_Music 3 месяца назад

DIY = Do It Yourself

@TeleTonemonkey 3 месяца назад

@@Semyon_Music Cool, in the UK we call that DIY. 🤷🏻‍♂️ Nice vid anyway. Thanks.

@Semyon_Music 3 месяца назад

@TeleTonemonkey it’s DIY here as well! Just a typo in the thumbnail!

@mirarzaamplification902 Год назад

I use mogami cable at work and it sounds like my sound level drop down compared to whirlwind. The mogami has lower level out compared to whirlwind so I need to crank up gain when using it. I don't know if thats the reason it is a silent cable.

@Semyon_Music Год назад

Check if the cable is the correct type! That could be the issue

@michaelrobinson9643 5 месяцев назад

is the length the same? Alternatively, it can be a thicker conductor in the whirlwind and less intrinsic loss.

@Semyon_Music 5 месяцев назад

What is the length of the cable you’re using and what type of mogami cable is it?

@mirarzaamplification902 5 месяцев назад

I make about 5ft length cable. I haven't check the cable of whirlwind but the mogami is little bit less flexible and has thick size copper too. I have the balanced and mono cables. I tried to use balance cable for instrument cables but still the same issue.

@Semyon_Music 5 месяцев назад

@@mirarzaamplification902 check if you have a ground loop issue potentially or not the right impedance set for the instrument

@Khaab00 10 месяцев назад

Please do a tutorial for an xlr cable.

@Semyon_Music 10 месяцев назад

Video coming soon!

@Semyon_Music 8 месяцев назад

Just released a video for XLR cables! → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nL063d-J__o.html

@billtharp3374 6 месяцев назад

Great and helpful video. Your life could be made easier by 1 or 2 “Helping Hands” they sell for $5 each at Harbor Freight - nothing fancy just to hold wires. Thanks, buddy!

@Semyon_Music 6 месяцев назад

Thanks! I tried some helping hands before but they were flimsy. Send me the link for the ones you use

@Stelios.Posantzis 3 месяца назад

0:36 I don't believe you. If you had made it yourself, it would have a sleeve with "myself" written on it.

@Semyon_Music 3 месяца назад

Haha 😂 Gotta get those custom sleeves