No video :(

DIY Mogami Gold XLR Cable for only $20 (vs $90 at the store)

Подписаться 1,7 тыс.

Просмотров 4,6 тыс.

50% 1

Video on how to make Mogami Gold TRS Cable → • How To Make MOGAMI GOL...
🥁 My first sample pack The DRUMS Vol. 1 is out now! → www.soundsbyse...
Make you own Mogami gold XLR cables! For the longest time, I bought cables at the store like most. Then when I upgraded to Mogami cables, I could not believe how expensive they are. Well I quickly learned that I could easily make them myself at home by buying Bulk Mogami cable and all the parts/connectors, and putting it all together at home. This method is 4 times cheaper and in this video I'll show you how you can wire your music studio for a very low cost with high quality audio cables!
0:00 Why Make Cables
4:32 Making an XLR Cable: Part 1
20:14 Making an XLR Cable: Part 2
26:08 Making an XLR Cable: Part 3
37:44 Testing the Cable
39:02 Final Thoughts
Cable Making/Soldering Gear: kit.co/semyonm...
► 📧 Contact
contact@semyon.ca
► 🧍Socials
Instagram: / semyonmusic
TikTok: www.tiktok.com...
► 🎹 Gear
All Gear: kit.co/semyonm...
Music Gear: kit.co/semyonm...
Studio Essentials: kit.co/semyonm...
Lighting: kit.co/semyonm...
Video Gear: kit.co/semyonm...
Hard Drives: kit.co/semyonm...
Cable Making/Soldering Gear: kit.co/semyonm...
►🥁 Sample Packs
www.soundsbyse...
My first sample pack The DRUMS Vol. 1 is out now!
►🎙️ Work With Me (Production/Mixing/Mastering Services)
www.producedby...
*Disclosure: if you use the links above to buy the gear I use and recommend, some of the links are affiliate links which give me a small percentage, which helps support the channel!
#musicproducer #musicstudio #music #producer #homestudio #homemusicstudio #musicgear #analog #audio #audiocables #tutorial #mogami #mogamigold #musicproduction #musicproductionlife #musicproducerstudio #mixing #mastering #mixingmusic #soldering #solderingtips #audiocable #TRScable #savemoney #XLRcable #mogamigold

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@Semyon_Music 7 месяцев назад

I also made a video how to make Mogami Gold TRS cables! > ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XovJn0zMRuI.html

@Lyc3600 Месяц назад

Honestly, you'll be better off with leaded solder. Something like Kester 44. Soldering does NOT produce lead fumes. Leaded solder is far more forgiving, and, in my experience, longer lasting -- lead free tends to be brittle, and requires higher temps to solder well. Also, no need for the quad cable. Mogami W2549 or W2552 works great, and is designed for this application. Try a pair of cheap hemostats (or medical needle holders) to hold your wire while soldering.

@Semyon_Music Месяц назад

All awesome tips, thanks! What temp does the kester 44 need?

@dianadk3550 8 месяцев назад

Thanks so very much for this amazing video!

@Semyon_Music 8 месяцев назад

Thanks for watching!

@TennaOfficial 8 месяцев назад

Such a great solution! Thank you for this 😊

@Semyon_Music 8 месяцев назад

Any time!

@XTheCreator 8 месяцев назад

THANK YOU SO MUCH!

@Semyon_Music 8 месяцев назад

🔥🔥

@granoj1 5 месяцев назад

why the use of quad cable?

@Semyon_Music 5 месяцев назад

It doesn’t a better job of rejecting RFI interference on longer cable runs compared to pair cables

@mississippijohnfahey7175 5 месяцев назад

Any other differences in your experience? I've heard there can be impedance issues with the quad?

@Semyon_Music 4 месяца назад

@mississippijohnfahey7175 haven’t had any issues personally

@bookerbosq7850 2 месяца назад

@@mississippijohnfahey7175only on really long runs

@Boz1211111 3 месяца назад

oof soldering not optimal at all, i solder for work so this was bit painful to watch hah, your tip is wrong, wires too long, iron def too long on contacts because of poor tip choice and not wetting the tip more prior to soldering

@Semyon_Music 3 месяца назад

Didn’t claim I was a professional soldering expert! Just a music producer showing others what I know about making cables at home. The cables have held up so far!

@Boz1211111 3 месяца назад

@@Semyon_Music no problem, i havent implied you labeled your work wrong just thought to give my view!

@Semyon_Music 3 месяца назад

All good! What kind of tip would you recommend for cable soldering?

@Boz1211111 3 месяца назад

@@Semyon_Music as i wrote, tip choice is bad, in fact cone tip which comes default with almost everything is one of least useful tip shapes and i never use it. for most things including cables i prefer C or cf series tip, which is super easy to keep clean and has large flat contact area, holds a lot of solder exactly where you need it. Second thing when you want to solder(heat) a joint tip has to have some solder on it to make proper contact, and using even more when joint is tough and will wick solder away to prevent iron tip from loosing proper contact. You used cone tip (B series) which never has solder where you need so what happened in the video is quite expected. also, i prefer to have least amount of stipped wire in the connectors, because some connectors have to be made that way or cable wont fix in locking mechanism

@Boz1211111 3 месяца назад

doing it properly will avoid excessive time terminal is heated and prevent it from melting plastic its mounted in