Тёмный

How To Make Your Own INLINE TROUT SPINNERS (easy!) 

Fish Hawk
Подписаться 132 тыс.
Просмотров 81 тыс.
50% 1

Want to know how you can make your OWN inline Trout spinner? In this video I show you step by step how you can make your own inline Trout spinners. I show you each of the parts that you need to make an inline Trout spinner. After I go over all of the parts I show you how I make an inline Trout spinner. These inline spinners are great for ALL species of fish. They are easy to make and are more cost effective than buying inline spinners at the store. You can also take pride in catching fish on a lure that you made! You can make these spinners however you want. You can customize every part of the spinner. The combinations are endless!
BUY Fish Hawk merch!
teespring.com/stores/fish-hawk-2
THANK YOU for watching!
SUBSCRIBE for weekly fishing videos!
it's NEVER the last cast
Buy your parts here: www.jannsnetcraft.com/
Lure making guide: www.jannsnetcraft.com/content/...
Send mail: PO BOX 29, Bunker Hill, WV 25413
-Camera amzn.to/2xw9MSo
-Camera Accessory Starter Kit amzn.to/2wKFP2t
-Camera Chest Mount amzn.to/2wOEmmM
-Camera Head Mount amzn.to/2jW6ymK
-Camera Charger with Battery amzn.to/2xwFsaj
-Camera Tri-Pod amzn.to/2ykzTJz
-Camera Storage amzn.to/2wOq9Gy
-Camera Micro SD Card amzn.to/2jUhkKd
-Camera Microphone amzn.to/2iriJV9
-------------------------------------------------------------------------------------
-My Computer amzn.to/2wOpXqV
-Computer Lap Desk amzn.to/2wOrXiR
-Computer Case amzn.to/2fJrw3J
-Editing Headphones amzn.to/2yxRoHt
-Video Editing Software amzn.to/2xxfL9L
-Best Portable Power amzn.to/2hcG1Oa
The above links are Amazon Associate links
MUSIC: Ice Flow by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Спорт

Опубликовано:

 

1 мар 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 153   
@FishHawk
@FishHawk 6 лет назад
Who else is ready for some Trout fishing!?!
@rapidoutdoors4830
@rapidoutdoors4830 6 лет назад
Fish Hawk me I haven’t went all year
@propredatorfishing5447
@propredatorfishing5447 6 лет назад
Fish Hawk yeah!!!!
@luiscontreras5206
@luiscontreras5206 6 лет назад
Fish Hawk hey can you let us know how strong is that wire that you use it for spinner does it have like a test pound something cuz I'm trying to make a spinner for saltwater fishing and what will be a wire good enough that will allow me to know what is the strength of the wire itself
@JM-bb8xi
@JM-bb8xi 5 лет назад
It's that time of year again!
@scycosnake3964
@scycosnake3964 5 лет назад
Exactly why my dad started, he wanted to feel good he made something that could catch fish, just his own design, he didnt even intend on a business
@norabder1008
@norabder1008 3 года назад
Exactly what I needed!!! Thank you for taking your time to make this video. The split ring idea is great!!! I bought a kit on Amazon and I am getting ready to make some lures!!!
@RobKoch
@RobKoch 5 лет назад
Very helpful and enjoyble! Thank you very much! there is only one thing that i love more then fishing that is a crafting some useful things!
@southerntiersteelie3571
@southerntiersteelie3571 3 года назад
Hemmed and hawed on doing something like this. Thanks Fish Hawk. You made it look easy.
@evanbowen4221
@evanbowen4221 6 лет назад
Very helpful thanks for the video tips
@deepsouthNZ
@deepsouthNZ 5 лет назад
great job mate you made it look real easy.
@theschmerbs435
@theschmerbs435 6 лет назад
Man I can’t wait to go fishing 🎣 ..this video is what’s it’s all about great job sir..
@FishHawk
@FishHawk 6 лет назад
Thanks man! Good luck out there!
@westparkguy1104
@westparkguy1104 4 года назад
dang that outro slaps!! awesome video!
@enthusiasticfisherman1229
@enthusiasticfisherman1229 6 лет назад
BEST FISHING RU-vidR EVER!
@scuba6797
@scuba6797 4 года назад
This looks fun!
@aarontalks8440
@aarontalks8440 5 лет назад
This is a super cool video! The face when you slide the bead on made me laugh though. The hand on chin exaggerated movement just cracked me up! Great demo!!
@FishHawk
@FishHawk 5 лет назад
LOL that's hilarious 😂 thanks man! I appreciate it!
@urbanwolf6419
@urbanwolf6419 6 лет назад
Thanks for this. I will be ordering the parts with the links provided, something me and my 8 year old grandson can do together on a rainy day.
@FishHawk
@FishHawk 6 лет назад
That's great! Start them young. Thanks for watching!
@Dream-lx8nx
@Dream-lx8nx 4 года назад
Wow thanks! it really helped!
@gregdimeolo9558
@gregdimeolo9558 3 года назад
Great video .very helpful
@Rogerio51
@Rogerio51 6 лет назад
Looks like fun!
@fincityfishing5490
@fincityfishing5490 3 года назад
The split ring makes sense i also feel like it has a bit more play to move and I like that
@calebfiero6586
@calebfiero6586 3 года назад
Well made!!
@drifteroutdoors
@drifteroutdoors 5 лет назад
Great video, just what I was trying to figure out.
@FishHawk
@FishHawk 5 лет назад
Thank you!
@pescandotesoros
@pescandotesoros 3 года назад
easy job bro thanks for the video.
@Wantedspark10
@Wantedspark10 4 года назад
Thank you so much. This was so helpful. Me and my friend are gonna start making our own and selling them
@FishHawk
@FishHawk 4 года назад
Awesome! Glad it helped. Good luck!
@mikeseals4500
@mikeseals4500 6 лет назад
Been fly fishing most of my life but now with your video I am eager to start spinner fishing instead....great video "thanks"...
@FishHawk
@FishHawk 6 лет назад
Nice! I've only been spinner fishing but I'm thinking about getting into fly fishing. Thanks for watching!
@JM-bb8xi
@JM-bb8xi 5 лет назад
Happy to see the WVU hat. I'm a SW PA native near the WV border, moved to the Pacific northwest and got into kokanee fishing. Don't trust the locals here when it comes to DIY projects (west coasters am I right?). Gave this a shot and I have the best spinners on the water here. Good ol boys get it done!
@ronuhlenhopp9368
@ronuhlenhopp9368 3 года назад
I recently began building inline spinners for stream trout fishing. I highly recommend the Twistech wire bender! It will save your fingers, is time efficient, and produces professional inline spinners every time. I found this wire bender difficult to find in stock. I compared the TwisTech to many other wire benders with the TwisTech the clear winner. Before I bought the professional wire bender, I became very proficient building the inline spinners with an assortment of cutters, wire bending pliers, serrated and non-serrated pliers, and wire bending dental pliers. This experience has led me to appreciate the TwisTech, for one can build spinners in about a minute with consistent, professional results with no stress on your fingers. I de-barb all of my hooks and have learned that open-eye Siwash single hooks are the very best for cathch and release fishing. I pinch the barbs flat, enjoy quick releases leaving the fish in the water, with no danger of removing the protective slime, squeezing the fishes organs, gill hooking, tongue hooking, or foul hooking the trout. I also have learned that there is no difference in hooking and landing the trout consistently. I have learned that it is also quite important to avoid too large hooks depending on the size and species of trout in the stream or river. I've enjoyed your videos and look forward to more. Ron, NE Iowa.
@FishHawk
@FishHawk 3 года назад
Thanks for the comment Ron. I actually own a TwisTech wire bender and I agree with you. They are amazing tools!
@aferg1986
@aferg1986 2 года назад
I see the WV hat! My family is in Webster county! Great video!
@papawjohnnywoodcarvingandfishi
great video
@JM-bb8xi
@JM-bb8xi 5 лет назад
I've been trying flies and such for 2-3 years now. Rapala makes an ok set of pliers but I got mine from harbor freight for a lot less.
@hdayan1945
@hdayan1945 2 года назад
Good job.
@tylerorito9113
@tylerorito9113 6 лет назад
Awesome video can't wait for more trout videos you should also do a budget trout fishing video and you should try to make your own power bait keep it up almost 2000k
@FishHawk
@FishHawk 6 лет назад
Good ideas! Thanks for watching!
@pacificblui3711
@pacificblui3711 4 года назад
Thanks this was a help
@chrisbajema8002
@chrisbajema8002 6 лет назад
Thanks for the info going online cause this loss in lures is hurtin the pockets. Taking pride sounds good
@FishHawk
@FishHawk 6 лет назад
For sure!
@Jredding352
@Jredding352 6 лет назад
That’s nice good job!
@FishHawk
@FishHawk 6 лет назад
Thanks bud!
@pikeevans8559
@pikeevans8559 5 лет назад
Great video. A couple of minor pointers....If you use your regular needle nose pliers and hold the loop you made so that the tag end you bend around the shaft is parallel to....and against the pliers, that will keep your loop nice and round and I find it makes it easier to get a nice tight wrap as well. Then as you add the split ring on you can also add the treble hook at the same time and save a step. Hope I explained that Ok. Good luck with the trout fishing.
@FishHawk
@FishHawk 5 лет назад
Thank you! :)
@scottoleary9374
@scottoleary9374 6 лет назад
Very helpful and entertaining
@FishHawk
@FishHawk 6 лет назад
Happy to hear it! Thanks for watching!
@rasmusmadsen7973
@rasmusmadsen7973 3 года назад
i made a working spinning lure from a paperclip, a soviner from london eye (you know theese things that are made from pressing a penny) and some pearls and some wire. Now that is an actual diy spinning lure
@FishHawk
@FishHawk 3 года назад
that's cool!
@rasmusmadsen7973
@rasmusmadsen7973 3 года назад
Thanks you😃 yours too
@MegaNafo
@MegaNafo 6 лет назад
nice job
@darthnixster5970
@darthnixster5970 Год назад
Planning a trip in April. Maybe we’ll see you on the Cherry or Cranberry
@WaynJul
@WaynJul 6 лет назад
Turned out really nice. I like making lures to.
@FishHawk
@FishHawk 6 лет назад
Thanks! It's a lot of fun! What kind do you make?
@WaynJul
@WaynJul 6 лет назад
Some top water balsa wood lures, I like experimenting with different spinners on different lures. Aloso experimenting with a combo spinner/jerk bait combo. Also DIY gold spoon.
@FishHawk
@FishHawk 6 лет назад
Sounds awesome! The balsa wood lures would be a lot of fun. Might have to try them out sometime.
@Knotrockets
@Knotrockets 6 лет назад
Hey fishhawk fishgrub spinners has a kit on eBay pretty sweet.
@FishHawk
@FishHawk 6 лет назад
Awesome! Might have to check it out!
@josephspano3126
@josephspano3126 4 года назад
just ordered materials to start making my own trout lures....thanks for the info!.....and i see your from wv.!
@stevek2645
@stevek2645 4 года назад
LGM !!!!
@joshuavanscoyk9404
@joshuavanscoyk9404 4 года назад
Thanks man can’t wait to build mine for this upcoming fall season. Could you please make a guide or something to show what parts make what size spinner. Like 1/32oz, 1/16, 1/8 etc.
@FishHawk
@FishHawk 4 года назад
Check out this link... www.jannsnetcraft.com/content/make_fishing_lures.htm
@rockytalkndawoods3057
@rockytalkndawoods3057 4 года назад
If you live in a city with a "Fisherman's Marine and outdoor" you can pick up supplies for lures. And you can custom pic your colors and sizes in the store. Good video!
@rockytalkndawoods3057
@rockytalkndawoods3057 4 года назад
For me it's hard to picture sizes and fractional ounces on the interweb so seeing them in person really helps.
@rynodynomyte2755
@rynodynomyte2755 6 лет назад
Awesome buddy!
@FishHawk
@FishHawk 6 лет назад
Thanks buddy!
@rynodynomyte2755
@rynodynomyte2755 6 лет назад
Your welcome!
@sgtpavlov
@sgtpavlov 6 лет назад
Nice lure building,spinners are one of the lures I love to build too. With those closed loop wire forms,I typically use the closed end as the bottom,where you attach the split ring and hook. I like to attach a barrel swivel to the top,when closing the wire,for eliminating line twist. I like using single siwash hooks instead of trebles,as it's annoying to get out all 3 hook points from a fishes face,and a single hook doesn't damage the fish as much. With the inline blades like on panther martins,you don't need a clevis.
@FishHawk
@FishHawk 6 лет назад
sgtpavlov sounds great! Thanks for the info and tips! I am going to look into those siwash hooks.
@JoonMatthew
@JoonMatthew 2 года назад
Swivel is a lifesaver
@randyr6610
@randyr6610 5 лет назад
Hell thanks for showing me the split ring I was doing it the hard way.
@FishHawk
@FishHawk 5 лет назад
No prob! Thanks for watching!
@nicholassturms5308
@nicholassturms5308 4 года назад
Wv fishing is like no other fishing because theirs so many species of of different body's of water such as lakes resewars rivers ponds streams and you can catch so much fish all year round
@christopherharpster9330
@christopherharpster9330 4 года назад
I wonder if you could pick up parts for these at like Hobbie Lobby or other craft stores?
@richiekaylor5004
@richiekaylor5004 4 года назад
Since were in quarantine you should repost old videos like this bc im bored as hell but packages will still come
@rapidoutdoors4830
@rapidoutdoors4830 6 лет назад
Almost a 2000 subs
@27swampfox
@27swampfox 3 года назад
Hello what web site did u go to to purchase this stuff I’m very interested ty
@rapidoutdoors4830
@rapidoutdoors4830 6 лет назад
If you do more minnow trapping videos can you try cheese and garlic plz
@stephensever5630
@stephensever5630 Год назад
Any idea in cost per lure to make these? I’m going to make these either way just curious if I can justify it by cost savings lol
@redbeardthepink4809
@redbeardthepink4809 2 года назад
1000th like w00t!
@zilvinasjurevicius2227
@zilvinasjurevicius2227 3 года назад
hey,from where you buy those things?
@TurboK24z
@TurboK24z 2 года назад
Is it cheaper to make these with that kit or buying them at walmart? And if so buy how much?
@IncognitoRS
@IncognitoRS 2 года назад
Hey man, I've been wanting to know where to find that color of inline spinner BODY. I can't find them anywhere. Just wanting to make my own white rooster tails but I can't find that style really anywhere in stock.. Any suggestions?
@acexiong4749
@acexiong4749 Год назад
What website can I get the parts to create my own?
@Wantedspark10
@Wantedspark10 5 лет назад
im gonna start making my own lures and start selling them!!!!!!!
@trystenruiz3012
@trystenruiz3012 6 лет назад
Hey bud i make flies for bluegill and bass can also fo catfish
@FishHawk
@FishHawk 6 лет назад
That's awesome!
@joselopezgarcia528
@joselopezgarcia528 3 года назад
👍
@calebcook1791
@calebcook1791 6 лет назад
You should really get a mtb trout edition. I got one and I don't regret it.lol
@FishHawk
@FishHawk 6 лет назад
I might try it some day
@calebcook1791
@calebcook1791 6 лет назад
Really recommend
@NetSurfer-dn8ui
@NetSurfer-dn8ui 2 года назад
you should post a link with the individual parts
@franciscomunoz9294
@franciscomunoz9294 2 года назад
Donde puedo xomprar las piezas .gracias
@aniskhan6818
@aniskhan6818 2 года назад
Supeerrr
@stacyray6549
@stacyray6549 2 месяца назад
what’s the weight of the one you just made you thing?
@mystiquelove4793
@mystiquelove4793 6 лет назад
But is it cheaper then buying the non completes then the complete rostertails
@FishHawk
@FishHawk 6 лет назад
The initial cost is higher. I spent $31 on all the parts. But it will make about 20 spinners. That comes out to $1.55 per spinner. You could do it cheaper if you got some cheaper parts. I bought some nice Berkley Fusion hooks. That was the most expensive part.
@benmwv
@benmwv 6 лет назад
Think there will be much difference from not having the bundle of hair covering the hook? Maybe you could do a face off of your lures vs rooster tails once you get on the trout
@benmwv
@benmwv 6 лет назад
I dont think it would be hard to add that to your homemade lures tho. Just get a fly vice and a wrapping tool
@FishHawk
@FishHawk 6 лет назад
I thought about that. I tried buying dressed treble hooks that had the hair on them already. Then I thought about adding it on my own. I could try doing a face off to see if it makes a difference. I think it would be tough though.
@FishHawk
@FishHawk 6 лет назад
I might look into that. I do really like the added hair. I think it gives it a little something extra.
@michaelramsey4920
@michaelramsey4920 6 лет назад
So now make a couple more in different colors, and do a video testing them out.
@matthewnelson7129
@matthewnelson7129 5 лет назад
I never thought about making my own trout spinners. This is definitely a cheaper route than buying them in store. I do have a few questions: 1) Did you catch any trout on the lures that you made? 2) Do you feel it caught similar amount of trout as the store bought ones? 3) Have you, or anyone that you know, ever tried painting them with "lure paint"? I ask the third question because I live in Colorado and the fish generally hit Red colored spinners and Red colored bodies are not as easy to find in mass quantities online.
@FishHawk
@FishHawk 5 лет назад
Honestly, I haven't fished with them very much. I will start using them more often this coming winter/spring. I assume they will catch the same amount of fish. I don't think there will be any difference in performance. I have not tried painting them but I'm sure you could. I believe you can buy plain un-painted lure bodies.
@cingmancingiwak5510
@cingmancingiwak5510 4 года назад
🐟🤩🤩🤩🤩
@jerdew
@jerdew 6 лет назад
I've been out a few times the rainbows are small and the brookies smaller, guess they will grow. catching them on Orange Trout Magnet.
@FishHawk
@FishHawk 6 лет назад
Hope they grow! Or stock bigger ones! Trout Magnets are killer. Keep up the good work and thanks for watching!
@timothythompson2678
@timothythompson2678 5 лет назад
I saw in one of the comments below that you had a cost of $1.55 per spinner. That's like half of what a roostertail would normally cost. I'll bookmark that website. I lose a lot of roostertails. And midwest finesse jigs. There are molds available for those, but it's a higher initial cost. You have to get a melting pot and lead, plus hooks on top of the mold.
@FishHawk
@FishHawk 5 лет назад
Yeah man! Definitely more cost effective. Like you said, just that higher initial cost but in the long run it's much cheaper.
@WishinIwasFishin1
@WishinIwasFishin1 5 лет назад
@@FishHawk Nice video, I almost exclusively use rooster tails and always wanted to make my own. If the loops in the wire aren't straight, do they track funky? Or the blades stick?
@FishHawk
@FishHawk 5 лет назад
@@WishinIwasFishin1 if the loop for the hook isn't perfect it shouldn't impact the performance. As long as the main shaft stays straight.
@sawyer_3759
@sawyer_3759 4 года назад
I make these a lot. What can I use these to catch? I don’t fish trout. Anything else bite them?
@FishHawk
@FishHawk 4 года назад
for sure. today I caught crappie, bluegill and largemouth bass on an inline spinner :)
@sawyer_3759
@sawyer_3759 4 года назад
Fish Hawk nice! Thanks
@evanserafini1845
@evanserafini1845 3 года назад
What is the diameter of the wire
@haroonrashid7229
@haroonrashid7229 6 лет назад
This is just assembling of a spinner. Can't you make a spinner with household things?
@FishHawk
@FishHawk 6 лет назад
True. You can make one from household items. I may do that in a future video. Thanks for watching!
@rapidoutdoors4830
@rapidoutdoors4830 6 лет назад
What’s up everyone
@FishHawk
@FishHawk 6 лет назад
Hey Rapid Outdoors!
@ryankerby8058
@ryankerby8058 6 лет назад
Hi
@FishHawk
@FishHawk 6 лет назад
Hey Ryan!
@ryankerby8058
@ryankerby8058 6 лет назад
Are you going to do any fly fishing for trout this summer
@FishHawk
@FishHawk 6 лет назад
Probably. I don't really fly fish but I am going to try this summer.
@ryankerby8058
@ryankerby8058 6 лет назад
I tried fly fishing at the end of summer last year and caught a brown trout on the hairs ear fly
@AutodidactEngineer
@AutodidactEngineer 5 лет назад
you actually want to put a bead before you put the cleavas.
@FishHawk
@FishHawk 5 лет назад
I did lol
@user-sj6wd8xf8q
@user-sj6wd8xf8q 6 месяцев назад
민물 낚시 저는 바다낚시
@leovoldoftrest9987
@leovoldoftrest9987 7 месяцев назад
Where does Netcraft make their products? China?
@adventureswithfrodo2721
@adventureswithfrodo2721 5 лет назад
You lose need a bead near the first eye.
@FishHawk
@FishHawk 5 лет назад
lol why? no big spinner makers put a bead above the blade
@billsutherland2128
@billsutherland2128 3 года назад
Music, nope.
@fairlandfishing3237
@fairlandfishing3237 5 лет назад
U said Rapala wrong
@FishHawk
@FishHawk 5 лет назад
there's about 3 different pronunciations of it. No matter how I say it, someone will comment and say "you're saying it wrong". I can't win lol
@flaviotannus1513
@flaviotannus1513 5 лет назад
vai ser ruim de arame lá longe heim....
@l3athalsubzero649
@l3athalsubzero649 5 лет назад
Im pretty convinced spinners, dont catch fish. Scam, for fishers to waste money.
@FishHawk
@FishHawk 5 лет назад
Huh? lol I catch all my trout on spinners. Check out some of my other videos. Spinners are not a scam, they catch fish.
@l3athalsubzero649
@l3athalsubzero649 5 лет назад
@@FishHawkmaybe its just the rivers or areas i fish. But the fish here dont really bite them. I fished countless 10hours days all this summer. Using spinn bait. The amount of time i spent messing with those useless things, i could have caught so much more fish with baiting. But instead for all my hard work i caught 1 fish. Like i said maybe its just where im at and the fish dont really seem to touch spinners here. Or at least for me.
@FishHawk
@FishHawk 5 лет назад
@@l3athalsubzero649 I understand where you're comin from. What part of the world do you fish? Here in the eastern United States they work great. Some baits just don't work everywhere. You probably have baits/lures that don't work well in my area.
@l3athalsubzero649
@l3athalsubzero649 5 лет назад
@@FishHawk i live in utah, and fish mainly the rivers close to me, the weber river, and the ogden river which feeds into the weber. Most of my troat fishing is done on the ogden river as it 5mins away from my house. But i have about 100 spinners. Panther martins, roosters tails, rapalas you name it. Just for me they never get fish. Id catch a troat with a piece of hot dog before spinn bait, and have lol
@l3athalsubzero649
@l3athalsubzero649 5 лет назад
Maybe im doing it wrong idk, ive watch lots of video, wondering why i can never get fish with them, i seem to do everything everyone else is doing and using. But no fish
@klyonsden
@klyonsden 3 года назад
I didnt like this video because you were never close enough to your product for me to figure out what you were making. You lost me at clevis and never got me back. I was so disappointing because I wanted to see how to make them. Get right up against it next time!
Далее
Best father #shorts by Secret Vlog
00:18
Просмотров 17 млн
How to Make your own Trout Spinners for SHTF Survival
19:15
The Banned and Controversial Flies!
13:16
Просмотров 2,4 млн
Creating the Mepps Bronze Slammer
5:10
Просмотров 18 тыс.
How to make Inline Spinners For Trout (Very Easy)
6:04
I DESTROYED a bluefox spinner, then built it better
8:29
How to make your own spinners for Trout Fishing
6:39
How To Make Your Own IN-LINE SPINNERS For TROUT
10:33
Тренируй дриблинг😁🤣
0:11
Просмотров 450 тыс.
So satisfying! 🎯
0:26
Просмотров 6 млн
Ronaldo Vs Other Players ☠️
0:42
Просмотров 12 млн