How to mask a car ready for paint, hints and tips to mask efficiently

Подписаться 700

50% 1

In this video we run through some tips and tricks used by professional body repairers and painters in order to make the paint stage as efficient and clean as possible. We want to empower and enable YOU to be able to carry out repairs and restoration work yourself at home without having to pay bodyshop prices so please subscribe to our channel for more great HOW TO videos and entertaining custom builds.
Mask
amzn.to/4a9xHXD
Plastic sheeting (self adhesive rolls)
amzn.to/3IWJuwy
Sheeting cutters
amzn.to/4awt2Pn
Masking Tape
amzn.to/499iXGZ
Tack Cloths
amzn.to/3x52tlV
Solvent Panel Wipe
amzn.to/3ITsZS0
Fade out blender (in gun type)
amzn.to/4ab1XBx
Foam edge
amzn.to/4cGyWj3
#painting #howto #bodywork #filler #diy #dent #car #repair #fix #bodywork #paint #masking #spraybooth #spraypaint #spraygun #efficient #tips #tipsandtricks #hints #custom #ford #fordfocus #carrepair #autobody #bondo #bodyshop #custompaint #maskingtape #backmasking

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@mreightytwenty8709 5 месяцев назад

Very good mate ...from Kiwi

@custombodyrepair 5 месяцев назад

Thank you mate, very much appreciated 👍

@Snip59 5 месяцев назад

That is so good to help us DIY cheers from Phil in Sydney

@custombodyrepair 5 месяцев назад

No problem Phil, we will continue to put out helpful videos as often as we can around all things body related mate 👍we have a new project here with lots of fibreglass work to do soon so there should be some great stuff on that too

@Snip59 5 месяцев назад

@@custombodyrepair look forward in how to blend the clear in so much cheers 👌

@Snip59 5 месяцев назад

@@custombodyrepairHi guys another question,i have just sprayed a House Door with Base Coat,then cleared it with 2K but did get some runs in the end only in 3 areas of the door.Can i just wet & Dry those areas with 1500 then just polish that area or will i have to sand the Hole the House Door.

@custombodyrepair 5 месяцев назад

@@Snip59 just the areas will be fine Phil no need to do the whole door

@Snip59 5 месяцев назад

@@custombodyrepairOk so 1500 wet & Dry yes then polish with a soft compound.

@meguinness1116 5 месяцев назад

Great video thanks, so between the 2 doors on the passenger side you didn't apply any masking? Ta

@custombodyrepair 5 месяцев назад

No problem at all mate, thank you. On this occasion I didn’t mask between the two doors as I wanted the clear to reach the tucked edge on the rear door but usually if for whatever reason I don’t want that to happen I either use foam tape in there or a flip edge similar to the drivers side 👍

@meguinness1116 5 месяцев назад

@@custombodyrepair but for example if the gap door lip need to be painted do you apply mask at the back to avoid over spraying going through? I been practicing and learning on my E39 BMW, done all the rust and dents repairs and getting close to the actual painting...that is actually all the full car ...but I don't want to touch the doors jambs as they no need to be resprayed.... and yes I'm worried about the masking part of it 🤣

@custombodyrepair 5 месяцев назад

@@meguinness1116 what you can do if you’d rather not get anything in there is back mask off the edge of the door and as you close the front door it will pick up the tape and stick to it so it should close out the gap and ensure minimal gets in there, that’s how I do it if I want to make sure it’s totally covered, if you are unsure of what I mean let me know and I’ll shoot a quick video for you during the week to show you how to get around it mate 👍

@meguinness1116 5 месяцев назад

@@custombodyrepair I believe I understand what you are saying 😁👍 thanks

@custombodyrepair 5 месяцев назад

@@meguinness1116 no problem at all buddy, happy to help 👍

@meguinness1116 4 месяца назад

Me again 😊, if the door handles are same colour of the body can I leave them and spray them at the same time of the body or is best to remove them and spray them separately? Ta

@custombodyrepair 4 месяца назад

You can leave them in of course but it’s best not to because you aren’t able to prep under them which in the long run could lead to those edges lifting and delaminating bud 👍

@meguinness1116 4 месяца назад

After how long finished spraying do u remove the masking? Ta

@custombodyrepair 4 месяца назад

Sooner rather than later is best mate, I just usually wait until the clear coat is touch dry and then I know I can remove without causing and damage or impressions in the finish 👍 most the clears we use that within about 45 mins or so

@meguinness1116 4 месяца назад

@@custombodyrepair Thank you, what brand of clear you use ? Standard or fast hardener ?

@custombodyrepair 4 месяца назад

@@meguinness1116 so we use a few and we pretty much always use fast or extra fast hardener, the clears we use are final systems ultimate, spectral 565-00, they are the main 2 but we do sometimes use others when needed for different finishes such as Matt or satin etc multi mix has also been very good for us in the past

@meguinness1116 4 месяца назад

@@custombodyrepair I through that fast hardener is better to use if only spraying a single panel, and standard hardener if spraying the whole car

@custombodyrepair 4 месяца назад

@@meguinness1116 it depends a lot on environment also if it’s colder use a faster hardener as it’ll slow down flash off times anyway, we can paint a full car with fast due to experience but if you aren’t spraying every day then perhaps go for a slower hardener if doing a full repaint bud 👍