Тёмный

How to mix Plaster of Paris - Satyen Sharma 

Satyen Sharma
Подписаться 2,1 тыс.
Просмотров 493 тыс.
50% 1

Here I'm sharing not only the perfect ratio in which Water and Plaster of Paris should be mixed but also which component should go first.
Before knowing how to make Plaster of Paris mix it is important to know mixing materials behavior first. Otherwise no matter how precise one is can't get the desired result.
It seems very simple mixing water with Plaster of Paris, but the twist is which everyone ignores that what should be mixed in what. Either A into B or B into A.
Because that will change the output of composition.
Here I'm sharing side by side what happens when one compound is put into other and vice versa.
What are the pros and cons of the same? Based on which one can decide what desired result one is looking for.
This tutorial is the best guide for making perfect
Plaster of Paris Solution.
Moreover, attached are some other links showcasing how this mixture can be used to create artworks such as a chocolate bottle.
• Valentine Day Gift
/ @satyensharma960
FACEBOOK PAGE:
/ creativeants2016
WEBSITE:
creativeants.co...
I hope this tutorial gives a better understanding of the components and guidance how to use it.
Thanks.

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 190   
@nutangupta63
@nutangupta63 6 лет назад
gyan dene se gyan badhta hai sahi jankari ke liye dhanyavad
@jessejohnson159
@jessejohnson159 3 года назад
I have actually done this both ways, depending on the volume needed. Small volume needed and mixed on a flat surface I do the powder first and slowly add water sometimes even using an eye dropper. Larger volumes in a bowl, adding powder to a preselected amount of water, letting it soak and absorbed till it's ready to mix and use. However, looking at the amount of volume of water in your cups, it did not look like it was filled to the same level as the powder in one cup. Optical illusion?
@jonsnow4894
@jonsnow4894 3 года назад
Thank you for saving me,i really need this
@candipill
@candipill 4 года назад
I think your tutorials are of the clearest and most demystifying of all the tutorials I have watched on this. I hope you wouldnt mind me asking you for some advice. I bought some flexible silicone moulds that I want to cast POP in for thin clay decorative embellishments. I want to know if you have ever Cold glue/white glue with your mixture to make it more sturdy? There are other tutorials that recommend 2 parts POP, 1 part water and half part glue? Would you recommend this? I tried to do it with crack filler but the casting came out too crumbly and my castings all fella part when I tried to unmould them. I think the glue would make it flex a little more so that I can gelt it our of the mould but I am wondering if I should make the ratio 2 parts POP, 1/2 part water and 1/2 part cold glue?
@satyensharma960
@satyensharma960 4 года назад
Thanks for the appreciation. I work on polymath and keep exploring different materials. You may check my link and recent artworks. instagram.com/sharmasatyen Further to your query you can use white glue positively as it prevents in cracking and more durable when POP dries. For mixing I suggest go with 3/4 water and 1/2 white glue mixed first. It will bring consistency in the solution and then later mix with POP. Other wise you may end up in half mix and half lumps. Hope it helps..:)
@candipill
@candipill 4 года назад
@@satyensharma960 thank you very much!
@hellenkamau3755
@hellenkamau3755 2 года назад
Thanks for the question Candipill Tincan. I was about to ask the same. I need to make some cases for selling, so I need them sturdy enough to be worth buying. Thanks for the answer Satyen. You have captured it well. Just like I needed it. Would the same work for white cement? What would the right ratios be like? Thanks again. This is very helpful. God bless you.
@taniagreenia4762
@taniagreenia4762 4 года назад
For my projects, I think the second option is more suitable. Thanks for showing the difference.
@AngelaM-s4o
@AngelaM-s4o 11 месяцев назад
Waste of time!!!
@hellenkamau3755
@hellenkamau3755 2 года назад
This is a very informative video. I've been looking this directions and those that you've given in the comment section. Your followers have some great insights too. Now, what would be the right consistency/method for decorative vases/pots. Secondly, what are the right ratios using white cement, white glue and water for vases. I would like to make them sturdy for selling. Thanks in advance.
@craiglaunder1494
@craiglaunder1494 10 месяцев назад
We’re having trouble with our plaster of Paris going mouldy after letting it dry why is this happening please
@dariaanimalutele_ei3422
@dariaanimalutele_ei3422 Год назад
Never thought of this , thank you , so first the water 😊🙏
@oddity4650
@oddity4650 3 года назад
Amazing explanation of comparing the differences.
@kuchinita
@kuchinita 4 года назад
I'm definitely following the first option for my diy pots. Thanks for a smooth and non complicated tutorial!
@pusaersd5317
@pusaersd5317 4 года назад
What is the best option for pot making?
@123thebasics
@123thebasics 4 года назад
Thanks so much 👏👏 l like pouring the water in first method.. I'm so happy I came across your viedo. I'll be working with plaster of Paris on Halloween projects this year..the plastdr has been sitting in my garage fot 2yrs waiting on a project. Thanks again 😛
@adhrikathejus1533
@adhrikathejus1533 3 года назад
best vidio i have ever seen about plaster of paris
@artandcraftbypadmag6832
@artandcraftbypadmag6832 3 года назад
I was always making mistakes now I know why.. thanks for the video 👍👍👍💕
@tanyaknipe7174
@tanyaknipe7174 3 года назад
Thank you for your advice much appreciated.
@humairagul7720
@humairagul7720 2 года назад
I try to use plaster of pairas.. but it becomes like a stone after 10 to 15 seconds... i am not able to use it.. it dries quickly.. even in 10 seconds
@johnjohn-ne8fw
@johnjohn-ne8fw 4 года назад
I can't lie. I do see a difference. Thanks
@lolomahoward6894
@lolomahoward6894 3 года назад
Hello, is there a food safe or close to food safe acrylic sealer that I can use for plaster of paris?
@poojakprasad7156
@poojakprasad7156 4 года назад
Wow!! Can definitely see the difference... Can I pour this mixture into a cone and use as lining for a drawing??
@satyensharma960
@satyensharma960 4 года назад
You asking for relief art ! ..you can but I suggest to go for marble powder that is more durable..hope it helps.
@debasmitaroy6954
@debasmitaroy6954 Год назад
Thank you so much for the process Sir.
@ramonadavis3411
@ramonadavis3411 4 года назад
Thank you! I did not know this. To me it is interesting, that just by how you do the water can get two textures.
@xxwashy
@xxwashy 2 года назад
Thank you!! Really helpful
@_mylastname
@_mylastname 3 года назад
Great lil test. Definetly a difference, will be putting this to use. Thanks!
@rafiudauda8744
@rafiudauda8744 3 года назад
I like it is vary nice to know all this how to use the plaster of Paris🤔
@nidhulek
@nidhulek 2 года назад
my mixture dries up quickly.. any reason why this is happening ? I did make the mistake of stirring it too soon :(
@somigera8378
@somigera8378 5 месяцев назад
Very nicely explained 👍🏻👍🏻
@adithyana3163
@adithyana3163 2 года назад
Thank you for the video this video is a lot for mee
@nishhhhhhhhhhhh
@nishhhhhhhhhhhh 2 года назад
Thank you, I'm using first method for my diy!
@roopalisakhlecha
@roopalisakhlecha 7 месяцев назад
Hi, shouldn't we add white glue to this mixture? For the plaster to get fixed on the surface
@aimanabbas981
@aimanabbas981 Год назад
Very helpful. But ky glue and plaster mixture always cracks how to fix it.
@Jackeline-gi3gp
@Jackeline-gi3gp Год назад
Great review! Thank you!!!
@patriciaweaver7735
@patriciaweaver7735 5 лет назад
hello thanks for the help what I meant to say was my POP got stiff while mixing using both methods it did not stay liquid and lovely like yours did after 2 minutes it was too stiff to pour that is why I asked did my POP go bad. and I used cold water for both methods thanks again
@satyensharma960
@satyensharma960 5 лет назад
Yes ! shelf life of POP is 3 - 6 months..that might be the case I think.
@bkumar3670
@bkumar3670 2 года назад
@@satyensharma960 first of all thank you for this simple informative vdo.... cleared my doubts on where i was going wrong after wasting 5kgs of POP lol. Always, now i know what to look out for when buying POP. This little date of expiry info wasn't mentioned where ever i searched. Glad i came across your page. You have one more subscriber now!
@satyensharma960
@satyensharma960 2 года назад
@@bkumar3670 glad it helped.. follow for my artworks at instagram.com/sharmasatyen
@jaymehamilton4580
@jaymehamilton4580 4 года назад
GREAT VIDEO, I'm new to plaster of parris, this is fantastic info. ty
@destinydeavila524
@destinydeavila524 6 лет назад
Great video! Thank you!
@sahajjeewanbydrlata
@sahajjeewanbydrlata 3 года назад
Nice to see new friend 🙏
@Mary-Ann_B_Mabaet
@Mary-Ann_B_Mabaet 4 месяца назад
Thanks! I was wondering why the plaster looked so watery! How in the world am I supposed to use it in this state?! Lol
@ThaMaskRapper
@ThaMaskRapper 3 года назад
But why is it like milk it's supposed to be dry
@renedupre7971
@renedupre7971 2 года назад
Thank you!
@johnbubu8310
@johnbubu8310 3 года назад
Thank you for this video!
@jamesthe27th94
@jamesthe27th94 2 года назад
Can a plaster of Paris pot be dry in only 10 hours in hot climate?
@peacefulscrimp5183
@peacefulscrimp5183 5 месяцев назад
Great video 👍
@arpitascreativity
@arpitascreativity 6 лет назад
Thanks for sharing such a nice information
@alexr6527
@alexr6527 6 месяцев назад
your welcome
@patriciaweaver7735
@patriciaweaver7735 5 лет назад
thanks again and happy new year you have helped a lot
@NekoleJ.
@NekoleJ. 2 месяца назад
But the little cups don't giv us a exact measurement of how much? Like is it 2 measuring cups or ? Does the little cups equal a cup using a measuring cup? Nobody on here really giv the measurements. Why i don't.
@janakiyeluripati6368
@janakiyeluripati6368 5 лет назад
Very nice video. By the way which one to use if I want to make molds. Also, can I make molds using kids toys like peppa pig. What should I do to get peppa pig mold. Please help I want to make it for my daughter and then let her paint it. Please help
@satyensharma960
@satyensharma960 5 лет назад
Glad you liked it .. I suggest to go with option 2 as it is dense and viscous. Less chances for air to trap. For molds check online easy to use for all purposes. Sharing a link here, hope it helps: www.amazon.in/JoyGlobal-Silicone-Chocolate-Sugarcraft-Decorating/dp/B07FP14FBL?tag=googinhydr18418-21&gclid=CjwKCAiAodTfBRBEEiwAa1haupGydjYN4xe3-ajRMMmFkGo-CmieeJYurHyAecXbJLS3s59iNgL5IhoC6soQAvD_BwE
@monikakumari4573
@monikakumari4573 2 года назад
God bless you
@stephaniephilbrick1811
@stephaniephilbrick1811 Год назад
Does anyone know what the temperature of the water should be?
@Anonymous-hx5vw
@Anonymous-hx5vw 7 месяцев назад
Normal tap water is fine. Cold or normal cold
@proudindian5020
@proudindian5020 3 года назад
Thanx for the tip
@ckinc89
@ckinc89 4 года назад
Vry mch TQ for th show,. ITS' A vry gud info👍
@creativemonali4026
@creativemonali4026 3 года назад
Thanks for sharing 👌
@anikazoutlet4110
@anikazoutlet4110 4 года назад
If u don't move it then there's lumps
@Amlish1
@Amlish1 4 года назад
Can this mixture be used to repair cracks on my cemented roof?
@satyensharma960
@satyensharma960 4 года назад
I'm afraid not.
@christophertadeo6120
@christophertadeo6120 Год назад
1200 degrees heat absorption.. well that decides it... 😳👍
@attitudechand5579
@attitudechand5579 3 года назад
Thanks ❤️
@lindaschaefer7917
@lindaschaefer7917 4 года назад
Nicely done, thank you.
@misatoshi07mohammed20
@misatoshi07mohammed20 4 года назад
Awesome video brother
@sakirhossain2032
@sakirhossain2032 3 года назад
Agar hath ma lage toh koi problem hai kia??
@pravashdas3817
@pravashdas3817 6 лет назад
nice video and great tips
@janethutcheson3678
@janethutcheson3678 2 года назад
I do like option 1.
@rainbowofkids
@rainbowofkids 2 года назад
How can you make this image tried this both ways
@tobyward6628
@tobyward6628 4 года назад
Cool, a very useful video.
@syedanoor9394
@syedanoor9394 3 года назад
Hi....I want to take my daughter's foot print ......can I take on plastic of Paris??
@satyensharma960
@satyensharma960 3 года назад
You can..do add fevicol to the mixture to avoid cracks.. when it gets dry and then later add a paint coat to seal it.
@joechiodi5529
@joechiodi5529 2 года назад
Can you use this for the clone a Willy thing?
@SevenDaysToNoon
@SevenDaysToNoon 3 года назад
Good job swapping the bowls at the end for clarity! 😂😂😂
@mina7572
@mina7572 3 года назад
Color coded.
@allainereyes8927
@allainereyes8927 3 года назад
Can I use the baby powder bottle?
@oilpntr
@oilpntr 4 года назад
Great instructions
@cuteluv2020
@cuteluv2020 3 года назад
should we take cold water or normal tap water?
@satyensharma960
@satyensharma960 3 года назад
Normal water
@reactiveinsight.
@reactiveinsight. 5 лет назад
but i want to make a big structure out of it so how to give the POP more strength and make more stable
@satyensharma960
@satyensharma960 5 лет назад
From big structure I assume you talking about Sculpture something..well you need to add reinforcement inside and wrap with some chicken mesh..that will hold the paste to your desired form and shape.
@reactiveinsight.
@reactiveinsight. 5 лет назад
@@satyensharma960 thanks satyen
@michaelanderson5232
@michaelanderson5232 4 года назад
Chicken wire
@michaelanderson5232
@michaelanderson5232 4 года назад
Or use paper mache (on chicken wire)
@dwarikasuman740
@dwarikasuman740 4 года назад
If i am mixing 1 kg Pop then how much water should I use
@slayer0960
@slayer0960 4 года назад
Hi i just bought some pop but as i am mixing it it is going lumpy and setting very quickly so i have barely 2 minutes from adding the pop with water before its setting in my bowl before i can pour it please help
@satyensharma960
@satyensharma960 4 года назад
Add cold water and use a table spoon of white vinegar to delay curing time..it also depends on the POP quality if it is old or maybe water is hard or soft by mineral content..use distilled water and clean container to mix.
@ammarabatool3253
@ammarabatool3253 4 года назад
I wana ask what is drywall or drywall material . Is it plaster of pairs or something else. Cz i hv seen drywall art on youtube.
@satyensharma960
@satyensharma960 4 года назад
It's dry wall compound for drywall art.
@abhilashamishra1229
@abhilashamishra1229 6 лет назад
Very nice vedio thanks for help my pop developed lumps but not after i saw this vedio thanks again😁😁
@arpitakumari9322
@arpitakumari9322 6 лет назад
k
@satyensharma960
@satyensharma960 6 лет назад
I'm Glad.. it worked for you:)
@ravikantkumartoni7948
@ravikantkumartoni7948 4 года назад
Good video
@patriciaweaver7735
@patriciaweaver7735 5 лет назад
Hello my POP set up so fast using the water first and water last version I used both and is i did not ever get to use it could my pop have gone bad please help
@satyensharma960
@satyensharma960 5 лет назад
Hi..it depends on the climate how dry or humid air is..use cold water .. POP is a game of max twenty fifteen minutes..by then it's start drying and taking shape..else try using different composition material available in market ranging 5 - 30 min drying period .. Hope it helps.
@kalasshalabyartikohli9168
@kalasshalabyartikohli9168 4 года назад
Informative
@bhaawinbhaawin1018
@bhaawinbhaawin1018 Год назад
Hi…plaster of paris jual kat mana ye?
@anchornaturals
@anchornaturals 2 года назад
Wowww what a wonderful tutorial 🙌👍Thank you so much 🙏🏻🙏🏻
@nan2790
@nan2790 2 года назад
Water powder ratio, this we have learned in our dentistry degree
@karimullashashaik8684
@karimullashashaik8684 5 лет назад
Make video on gypsum mixing thanks
@mqshqriq
@mqshqriq 3 года назад
plaster of paris is what you get when you mix gypsum with water
@vanigarstreetoldcsc764
@vanigarstreetoldcsc764 4 года назад
How to mix pop in clay form please make video on these
@vivinnair5634
@vivinnair5634 2 года назад
Where will I get pop??
@iamshidvlog1112
@iamshidvlog1112 4 года назад
Its hard for me to do plaster of paris bcos if i mix it, in 1minutes it bcome hard already if add water to it, it will not hard anymore
@Gopimenon123
@Gopimenon123 2 года назад
Sir, Can bowls made of pp be painted with something to make it look like ceramic
@satyensharma960
@satyensharma960 2 года назад
In appearance to some extent Yes, just coat the final paint coating with varnish.
@Gopimenon123
@Gopimenon123 2 года назад
@@satyensharma960 thanks a lot
@flerpbird1955
@flerpbird1955 2 года назад
@@satyensharma960 how well does the plaster retain detail while casting for creating molds?
@deanmroberts4335
@deanmroberts4335 5 лет назад
Thank you
@chromoplate
@chromoplate 2 года назад
Nice
@mina7572
@mina7572 2 года назад
Are they the same as eachother after they dry?
@satyensharma960
@satyensharma960 2 года назад
Yes..eventually both will be dry..it is just to differentiate mixture you need uniform bubble free for your activity.
@karimullashashaik8684
@karimullashashaik8684 5 лет назад
Very Good info 👍
@artofeverything6735
@artofeverything6735 5 лет назад
Can i use calcium sulphate
@x3apex208
@x3apex208 4 года назад
What is plaster
@नेपालीगीतसाङित
How can we make plaster of peris more stronger any idea
@satyensharma960
@satyensharma960 2 года назад
Add fevicol to the mix
@bethp44
@bethp44 3 года назад
I've learned that a pound of p of P will half fill a 10 inch pie pan.
@pratimapatil7558
@pratimapatil7558 4 года назад
I made a planter by covering plastic container with pop just now and kept for drying after 1hour there are cracks on it please help what to do?
@satyensharma960
@satyensharma960 4 года назад
Use white cement for a planter purpose that's more durable. In this case it might be thickness issue which lead to uneven drying. The inner layer dries slow as compared to the outer one which is exposed to the air that dries quickly. If it's completely dry fill the cracks with dry wall compound and latex paint. For other projects to avoid cracks cover it to retain the moisture with a damp cloth let it dry slowly. Also use fevicol in the mixture. Hope it helps.
@pratimapatil7558
@pratimapatil7558 4 года назад
@@satyensharma960 thank you so much replying. For now I made thin paste of pop and applied on the cracks with paintbrush they are disappeared for now...let's see what happens after complete drying....next time will surely add fevicol to it..
@pusaersd5317
@pusaersd5317 4 года назад
Please let me know what is the best option to make diy pots? Pink or yellow one? Thanks!
@satyensharma960
@satyensharma960 4 года назад
Yellow one for consistency.
@pusaersd5317
@pusaersd5317 4 года назад
Thank you. Very helpful
@poonamraj8945
@poonamraj8945 5 лет назад
Can I use this mixture to fill tile gaps in bathroom?
@satyensharma960
@satyensharma960 5 лет назад
I'm afraid not.. It won't retain for long.
@varshadevnani2551
@varshadevnani2551 2 года назад
Thanks very nicely explained One query within how much time it will start hardening.
@satyensharma960
@satyensharma960 2 года назад
Cool…normally it fully dries in 1-2 hours.
@olufadekemiajani4226
@olufadekemiajani4226 6 лет назад
Thanks for the video. Can one use pop to make beads?
@satyensharma960
@satyensharma960 6 лет назад
Yes, when you see it becomes semi-solid clay type but you have to be a bit fast before it completely dries out. Also, do layer the beads with color or something, else they will abrade. Hope it helps :)... Do check my other videos how to use this paste to create beautiful display chocolate bottles.
@lavanyanair7147
@lavanyanair7147 6 лет назад
Thanks....after watching ur video the mix turned toooooo good
@satyensharma960
@satyensharma960 6 лет назад
Lavanya Nair I'm glad you liked it. Chk my FB page to see more creative stuff. facebook.com/CreativeAnts2016/
@faizaparveen295
@faizaparveen295 4 года назад
For my project, i think the first option is more suitable
@arpitascreativity
@arpitascreativity 6 лет назад
Thanks for such a nice video .....How to reduce air bubbles ??
@alexandryelisseyev777
@alexandryelisseyev777 5 лет назад
Arpita's Creation vibration table
@rubyflores9477
@rubyflores9477 5 лет назад
Arpita's Creation spray it with rubbing alcohol to remove bubbles
@sirishakalisetti8696
@sirishakalisetti8696 3 года назад
I was just wasted pop to make a pot After spoiling my full pop I came here to see how to mix pop 😒
@SarveshSingh-zk4lu
@SarveshSingh-zk4lu 5 лет назад
Achi janakari batai
Далее
How To mix Plaster of Paris - For longer working time.
16:27
Plaster of Paris Mixing Guide
10:00
Просмотров 201 тыс.
This mother's baby is too unreliable.
00:13
Просмотров 16 млн
Guide to using Plaster of Paris
5:41
Просмотров 11 тыс.
How to make a PLASTER PRESS MOLD and How to use it
5:39
Jesmonite: Testing alternatives
14:38
Просмотров 273 тыс.
How to make your resin crafts like a glass clear
7:26
Why I'm Ditching Plaster Of Paris For Good!
8:50
Просмотров 33 тыс.
This mother's baby is too unreliable.
00:13
Просмотров 16 млн