No video :(

How to Modify a CNC602A Fuel Injector Tester and Cleaner for Reverse Flush

Подписаться 87 тыс.

Просмотров 9 тыс.

50% 1

The CNC602A does not come capable of performing a reverse flush but with a simple modification, it can be done. In this video, I'll show how to modify the fuel rail fittings so that the injectors can be placed upside down for a reverse flush. Then by using the #2 setting, (general spray test) where the injectors are held open for 15 seconds, the tester can perform a reverse flush.
Check out the Amazon links below for products and tools that were used in the video and you can do all your Amazon shopping through one of those links and the channel will receive a small commission, thank you for your support.
Amazon Affiliate
IRWIN Step Drill Bit, 1/8-Inch to 1/2-Inch Step, 1/4-Inch Shank amzn.to/2Z2xFPG
DEWALT 20V MAX XR Impact Driver Kit, Brushless, 3-Speed, 1/4-Inch amzn.to/2YWAPVg
6-Inch Quick Release Bit Holder - Works With All 1/4-Inch Drive Bits amzn.to/3dJBBcc
Fuel Injector Cleaner and Tester with Ultrasonic Cleaning Bath amzn.to/2X8cKsb
Mophorn CNC602A Injector Cleaner & Tester with Ultrasonic Cleaning Bath amzn.to/3dIfov7
eBay Affiliate
Ultrasonic Fuel Injector cleaning solution ebay.to/37AS68F
Donate to Help Support Channel www.paypal.com...
Facebook / martinbuilt-2351766611...

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@reaperasylum 3 года назад

I use the autool ct200 it has the kits and backflush option. Works great, good video bud.

@brentsmith5647 Год назад

Brilliant video thank u ❤️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@martinbuilt Год назад

Thank you for the thumbs up I'm glad you liked it and found it helpful.😊👍

@guillermos8643 Год назад

Muy buen trabajo.Saludos

@mstar501 3 года назад

Excellent Martin 👌

@martinbuilt 3 года назад

Thank you 😉

@LZDEN 4 года назад

first class Martin.

@martinbuilt 4 года назад

Thank you!

@DjDubStak 4 года назад

Dude that's a cool idea. Was anything wrong with that one injector?

@markhaith4720 3 года назад

Thanks Martin, any plans for video on preparing and testing decaped injector? There are some interesting views on this but would trust your more methodical approach to the process and getting it right

@everjulio149 4 года назад

buen video gracias desde venezuela

@Matts-cars Год назад

Hey, do you have any experience with the side-feed injector attachment for these machines? Any idea what size side-feed injectors it can accommodate?

@NoWr2Run 4 года назад

Sir Martin, Did you take out the baskets ( filters ) for this test, it looked like it ? Do you rebuild injectors for your self or just clean them ? I was wondering ( gets me in trouble sometimes ) if adding food coloring on the spray pattern test ( or if it would even work ) so you could see the spray pattern better ? Being kind of a clear color is kind of hard to see that well. I'm not sure if I asked you before but Do you have a special cleaner you use for cleaning injectors or what are you using in this machine ? GREAT VIDS. & THAT MACHINE IS PRETTY COOL I MUST SAY BUT ALSO YOU ALWAYS MAKE STUFF BETTER TOO, THANKS SIR MARTIN FOR THE EDUCATIONAL VIDS.

@martinbuilt 4 года назад

Thank you, no I didn't remove the filter baskets for this video, and I have been rebuilding injectors for years for myself. I just enjoy experimenting with them. I use Doctor Injector Test-Rite Calibration Fliud and Blue Goo for the ultrasonic bath.

@felixcalles8437 Год назад

Hello Martin. I order ct160 and ct150 and started leaking before installing injectors. I owned a shop and I am trying something that can work every day. How is your machine holding up? Do you have any idea which machine I should buy? I will appreciate your response. Thanks

@markhaith4720 3 года назад

Very interesting so thanks for your videos Martin. Is injector wiring plugged in normal way around or in reverse (do they operate in reverse polarity for reverse flush?). I'm assuming they plug in as normal as I didn't notice any changes made for this.

@martinbuilt 3 года назад

Your very welcome Mark, yes plugged the injectors in normally.

@alfredocomparte2702 3 года назад

Hi Martin, amazing video. I do have a question, what does reverse flushing the injectors do to them? How does it help them improve? Blessings Martin!

@griffon3275 3 года назад

Made a homemade DIY flow bench and invested all the money I saved into a 30L ultrasonic cleaner but major downside of my homebuilt I cannot do proper leak test at high PSI or backflush as the ability to seal the injector rail and injectors firmly isn't present on my set up. I can do comparative flow test and inspect spray pattern but backflush is manual 1 at a time and messy and a major pita

@martinbuilt 3 года назад

Very nice thank you for sharing 👍

@Kolonol1 4 года назад

Where do you get your bolt organizer in the background? I want one that big...all i can find is little junk though

@martinbuilt 4 года назад

you noticed that huh...I am working on the video on how to build that. Glad you like it.

@Kolonol1 4 года назад

@@martinbuilt I can't wait to see that...it's perfect for what I do...on top of cars I am very big into model trains....lots of TINY parts

@tedgreen4626 4 года назад

You seem to like the CNC602A pretty well. I tried one but it rarely pressurized, leaked and generally didn't work; ebay seller is accepting its return. It is possible that I "ruined" it by first filling it with Lucas Fuel Injection Cleaner which is quite thick. I have since learned to use "Calibration Fluid" which I just ordered. Trying to decide between buying another CNC602A or perhaps a Tektino 8-cylinder tester (which claims to do reverse flush). With so many ebay sellers selling the CNC602A, I wonder if some are known rejects. Can you tell us where you bought yours?

@martinbuilt 4 года назад

I would have preferred an 8 cylinder tester. I did get this one from eBay from this seller Fuel Injector Cleaner and Tester ebay.to/3hvCSWZ It's been working well except the ultrasonic bath burned up. It does not come with a timer so don't leave unattended like I did, went inside and for got about for 3 hours. I think it is important to use the correct fluid. Make sure anything you use is NOT flammable.

@gregj.gotham4402 2 года назад

Martinbuilt: Does the tester use gasoline as a fluid during testing! If not what fluid is used ? Another super video.

@martinbuilt 2 года назад

Don't use anything that is flammable. Thank you. Ultrasonic Cleaner Solution amzn.to/2Ve6u0H Blue Goo Ultrasonic Cleaner amzn.to/3eZNKLv TEST-RITE calibration fluid ebay.to/3hsyQip

@richardbonini4121 2 года назад

Hi Martin, I see you've had that machine for a year now... how would you rate it today? Also any thoughts on the CNC-603C? Thanks!

@benminor8458 2 года назад

Is there an adaptor to do side feed injectors? Ben Minor Marine Service, Parsons KS. Thanks

@martinbuilt 2 года назад

Yeah, unfortunately, there are no adapters for a side feed injector.

@dgarner0831 3 года назад

Do you know which machine i could use for my yamaha waverunner injector cleaning? I think they are Bosch

@martinbuilt 3 года назад

this machine should do the job.

@jodylambert5648 3 года назад

Have you every replaced pump on your machine if so what you use

@martinbuilt 3 года назад

no I have not, it's still going strong.

@boatdoc56 2 года назад

I am needing one like this do you recommend the cnc602a

@martinbuilt 2 года назад

Yes, I like this machine. After adding the reverse flush to the machine it does everything I need it to do. I do wish it had a built-in fuel filter. I will be adding that someday. I don't think any other brand has a filter either.