How to Modify your Shifter Linkage Part 4 - Honda Civic EG - Draft Project

Подписаться 13 тыс.

Просмотров 17 тыс.

50% 1

In this part 4 series, I will show you the reinstallation of the whole assembly back to the car.
If you haven't watch the previous series, click the link below!
Shifter Linkage Modification Series:
Part 1: • How to Modify your Shi...
Part 2: • How to Modify your Shi...
Part 3: • How to Modify your Shi...
Don't forget to subscribe to my channel!
/ @draftproject
Facebook page: / andredraftproject
/ andredraftproject
More videos? Check here!
Modifying Shifter Linkage: • Shifter Linkage Modifi...
Engine Oil Change: • How to Change your Eng...
Painting Bumper: • Painting Bumper Part 1...
Changing Cabin Filter: • How to Change your Cab...
Changing Crankshaft Oil Seal: • How to Change your Cra...
Rebuilding Clutch Master: • How to Rebuild a Clutc...
Bleeding Clutch: • How to Bleed your Clut...
Changing Dome Lights to LED: • How to Change your Dom...
Painting Drum Brakes: • How to Paint your Drum...
Changing Steering Wheel: • How to Change your Ste...
Painting Brake Calipers: • How to paint Brake Cal...
Music Credit: LAKEY INSPIRED
Track Name: "Go For It"
Music By: LAKEY INSPIRED @ / lakeyinspired
Original upload HERE - / . .
Official "LAKEY INSPIRED" RU-vid Channel HERE - ru-vid.com/show-UCOmy...
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
Intro music: Cutting Edge - Shutokou Battle 01 (Tokyo Xtreme Racer 3)
Thank you for watching and God Bless!
#andredraftproject #reinstallation #modresults

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@syrthdr09sybr34 2 года назад

Very nice! Proper diy project using basic materials and tools.

@DraftProject 2 года назад

Thank you very much!!

@nicholashays1246 4 года назад

Great series I'll be doing this over the next few days. Looking forward to seeing the boot/bushing replaced in the shifter assembly as well 👌

@DraftProject 4 года назад

Thank you very much! Hope you can share it with your friends too. :)

@UntiI117 4 года назад

Really surprised this is the only vid for this. I replace my shifter bushing and it didn't help at all, then I notice that its loose up towards the trans. I was thinking about doing something like this but wasn't exactly sure. This is awesome!

@DraftProject 4 года назад

Thank you very much! I'm really glad to hear that bro. I hope that this video helps you fix your problem. 😀

@r7-muhammadzulfikardefiant126 3 года назад

Super glad to find this channel! I have an EG too and it’s got this very same problem. Please keep making this type of content! Definitely subscribed!

@DraftProject 3 года назад

Thank you very much sir!!! I really appreciated it. Take care! 😀

@BoostedPastime 4 года назад

Subscribed for professional grade content. Outstanding!

@DraftProject 4 года назад

Thank you very much! 😀

@tayvonrose2528 2 года назад

Amazing high quality content. Will be doing this to my ej8 👍🏾👍🏾

@DraftProject 2 года назад

Thank you very much! Good luck with it.

@vieros_pnst6348 Год назад

That was clean👌🏻💖

@DraftProject Год назад

Thank you so much!

@davidmdiez 4 года назад

This is my problem. Thank you. It’s looks better too

@DraftProject 4 года назад

Thank you!

@guamracing7440 4 года назад

I agree , this is an awesome series. Planning to do this mod very soon. Thanks for sharing! salamat!

@DraftProject 4 года назад

Maraming Salamat din po!

@balloney2175 3 года назад

Walang anuman, raw. (Nothing to it, per Draft Project)

@BoostedPastime 4 года назад

This video is gold!

@DraftProject 4 года назад

Thank you very much!!! :D

@BoostedPastime 4 года назад

@@DraftProject thank you cant wait to see more!

@DraftProject 4 года назад

@@BoostedPastime Theres more videos to come soon! Thank you very much. :)

@kennmax4638 6 месяцев назад

Gonna be doing this on my ek

@DraftProject 6 месяцев назад

Thanks man! Good luck!

@FatLiquids 4 года назад

Great video but are you sur about the 3/16 hose ? The In diameter seem to be 5mmfor the bolt and after i realise my bolt was 8mmx70mm i look at the chart and 5/16 as to be the close to 8mm can you clarify that with me please ?

@DraftProject 4 года назад

Hi biggy, when I bought the hose, it says on the receipt as 3/16 hose. I also brought a sample bolt which is the 8mmx70mm and it fits nicely. I measured the inside diameter and it is 5mm. It is possible that there might some variations when it comes to the size of the hose. I would suggest you to buy with a sample bolt to test the fitment, so that you can be sure that you won't buy the wrong hose.

@balloney2175 3 года назад

Hey man, it's me again. I followed your advice to change my clutch fluid with a fresh one, but still I get a weak push of the pedal. I used the car on way to work early in the morning and driving was fine. When I was on my way home, I had trouble moving to second to third and vice-versa. Then I cannot move to third gear, so I flash my alarm cuz I was driving second gear at 15-20 mile/hour (it was a raining a bit, sigh!). When I reached home I have to turn off the engine so I can put it on reverse. I was to make a reverse few feet then the engine turned off while in reverse mode. I was three feet before getting inside the garage. Then horrible thing happened. When I try to start the engine while the gear is still in reverse mode, the engine would turn off. The following day I was thinking of elevating the front wheels so I can check if I will be able to release the gear from reverse mode. It worked. Now what I did next is to bleed the fluid but failed to make the pedal the was it used to be. When I turn on the engine, I cannot move the engine to any shift (mine is 5 speed). But I can shift the gear when the engine is off, I already consumed a big bottle of Dot 3 fluid. But failed to make the gear shift when engine is running. This is my third time changing Dot 3 fluid. Please advise. Thanks in advance!

@DraftProject 3 года назад

On the way home, did you lose some of the brake fluid on the master reservoir? It seems like the clutch master or the slave cylinder cannot hold the pressure when you depressed the clutch pedal. Resulting it to shift harder and sometimes the engine die when it lose the pressure. Have you tried checking the master cylinder if it is leaking? If not, just go underneath the steering column and check the clutch master where the rod connects to the pedal. There you will see if it has leaks or not. Second to check is the slave cylinder which is located on the front of the transmission, behind the radiator.

@stateofgabe4014 Год назад

Easy subscribe

@DraftProject Год назад

Thanks a lot!!

@FaderSkate 4 года назад

I don’t have rubber boot what is it really called so I can buy it

@DraftProject 4 года назад

It is called Shift Linkage Dust Boot. I suggest you to try to search for the part no. code so that it will be easier for you to buy it in the dealership.

@remonpopos1741 3 года назад

Please send me the video to change the Oil Cell Gearstick for Daihatsu Shared 90 Cylinder 3

@DraftProject 3 года назад

Hi sir sorry for the late response. Unfortunately I don't have a video for that. I am sorry sir. Try searching in the internet like forums. Take care and God bless.

@sethbowman Год назад

Can someone please tell me what the name of the boot is at 1:35 ? Been trying to figure it out all day so I can order the part for my car

@DraftProject Год назад

Try searching for this: 24316-P20-000 Honda D-series Shift Linkage Pin Dust Boot

@sethbowman Год назад

@@DraftProject thank you!

@charlessuba4945 3 года назад

0:56 ung boot sir yun ba ung pra di mahulog ang shifter?

@DraftProject 3 года назад

Hello sir! Sorry po sa late response. Hindi po sir. Dust seal po yan. Yan po ay para hindi madumihan yung bola ng shifter kung saan meron siyang sariling bushing. Plastic bushing po yung naghohold sa shifter. Bale sir merong dust boot sa itaas, sa gitna naman po ay ball seat (plastic bushing na naghohold sa shifter), at yung dust seal na nasa ibaba o yung nakikita niyo po na punit sa aking kotse.

@charlessuba4945 3 года назад

Whats the size of the fuel hose?ung gnawa mung rubber bushing? Diy kudin sana ek ko

@DraftProject 3 года назад

Hi sir! Ito po sir ang size ng mga fuel hose. Goodluck po sir hehe. God bless po! Bigger hose size: 3/8 Inner diameter: 9mm Outer diameter: 17mm Smaller hose size: 3/16 Inner diameter: 5mm Outer diameter: 13mm

@charlessuba4945 3 года назад

Ibang hose nagamit ko kanina,mas maliit ung butas kaya tinanggal ko ung dalawang metal bushing,sana tumagal haha. Mukhang matibay naman ang problem ko ngaun is sa mismong shifter upod na ung goma sa ilalim prang nahulog na,san kaya ako mkakabili nun ska anu ung tawag don.?

@DraftProject 3 года назад

@@charlessuba4945 Bale sir yung dust seal ng shifter po ata yung nakikita niyo po. Kung ganun po, palit narin po kayo ng ball seat (yung plastic bushing na naghohold sa shifter linkage) para hindi mapuwersa pababa yung dust seal. Sa Honda po mismosir mabibili yan. Hindi lang po ako sigurado sa mga auto supply. Sumubok din ako maghanap dati pero sa Honda rin po ang bagsak ko sir.

@charlessuba4945 3 года назад

@@DraftProject ayun ball seat pla ang need ko kasi gumagsak na ung shifter pero cgro mas mgannda kung dlawa na dpat bilhin ko isang dust seal at ball seat cge slamt. Ng mdami.

@DraftProject 3 года назад

@@charlessuba4945 Walang anuman po sir at maraming salamat rin po sa panonood. Ingat po and God bless!