Loose Shift Linkage Joint - EG Hatch (D Series Adapter Review!!!)

Подписаться 2 тыс.

Просмотров 12 тыс.

50% 1

(PLEASE WATCH THE WHOLE THING BEFORE PURCHASING!!!!!)
Alright guys on todays video I FINALLY fix my loose shift linkage..... sort of. lol
Instead of buying an entire shift linkage and stabilizing shaft from eBay for $150-$200, I decided to go another route for about half that price. The EG Hatch has really been in need of this repair because for the entire time I've owned it......it's been like this. Well not anymore!!
-GoodSpeed
PRECISION WORKS SHIFT LINKAGE JOINT ADAPTER V2:
www.carrottoptuning.com/produ...
Amazon Affiliate LINKS!!!
Dust Boot for Honda Civic CRX D-Series Shift Link Bolt:
amzn.to/3Pbi0pN

Опубликовано:

26 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@jhmed9

2:42

@Shreddylife

It doesn't look like you tightened down the allen bolts broski.. That would explain why there is still so much play. You should check out the Detent Spring Kit from speedfactory and the Shifter Spring they make. Its a really nice upgrade for the D series transmissions. It makes the shifter feel solid af compared to stock

@schafer240 Год назад

The second gear is the syncro, you need to rebuild it

@peachfuzzgrip

Ive bought same link kit hoping this would work, had to make all my own bushings and build both pivit joints at the trans end. Shifted hard from beginning but soon as winter hit it became harder and harder to get into 1st and 2nd. Keep in mind no gears grind just cant get them in. Im convinced creating your own setup using this adaptor is not ideal and like seen if this video alignment is off right away as the block connection isnt offset like the oem round knuckle. Dont waste your time and buya new OEM complete linkage or a used one that isn't whooped/loose.

@styleispower9385

Bro you’re supposed to tighten the allen bolts so it clamps down on the transmissions side of the shifter lol

@whiterice42 Год назад

50-50 honda mtf and synchromesh for that 2nd gear grind.

@BigGmantis Год назад

Looks like the 2 bushing they gave you goes on the other part of that knuckle.

@jimhiscott2918 Год назад

I have seen this kit before. Extremely nice piece. If you evert decide to install new syncros its super easy. Lots of very helpful videos on youtube. You do really solid work my guy👍Not to many know the actual namecof what they referctonas a bitch pin. Its acually a "roll pin" 😉