How to - New rear shocks and upper mounting brackets for Opel Astra J

Подписаться 2,1 тыс.

Просмотров 16 тыс.

50% 1

Hello everybody!
In this video, I'm changing new rear shock absorbers and upper mounting brackets to my 2012 Opel Astra J. Quite easy job. For me, the hardest part was in the end, because I couldn't get my car's rear higher. I didn't change rear springs, those weren't broken and looked pretty good... I'm sure that I have to do that in the future, those will break in some point.
Link to my rear brake job video: • Opel Astra/Vauxhall J ...
Link to my front brake job video: • Opel/Vauxhall Astra J ...
Link to my front suspension job video: • 2012 Opel Astra J FRON...
Parts and tools I used:
Bilstein B4 OE Replacement shock absorbers
Febi Bilstein upper mounting brackets
Wheel stoppers
Car jacks
Jack stands
Breaker bar
Rostlöser
Socket ratchets
Impact driver
15mm, 17mm, 18mm, 21mm sockets
Angle measuring tool
Brake cleaner
Disclaimer:
This video is for entertainment purposes only. I'm not a professional car mechanic. My methods of doing things might not be the only way or the right way to do things. Do your own research for the specs and right kind of parts for your car. Always use appropriate protective safety wear and glasses!
#opel #vauxhall #astra #suspension #shock

Хобби

Опубликовано:

2 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@kristi7626 2 года назад

Thanks a lot man 👍🏼

@joserallylove365 2 года назад

¡¡Thank you very much!!

@gregsmith1641 Год назад

Made me laugh when you got excited because the coil springs were cleaning haha

@AndreasKettern 13 дней назад

Top

@funkymonkey1968 2 года назад

Spot on!! Just what i was looking for. How did the car ride afterwards?

@kaukolaDIY 2 года назад

I really didn't notice any difference, maybe, just maybe it feels a little bit harder on the road, and i mean in a good way. Those were Bilstein original replacements, so i wasn't expecting much of a difference. I didn't do any wheel alignment, but it drives straight and after sommer, i can't see any unevenness in my tires.

@paulkazjack Год назад

Good video. Did they actually need replacing or was it just for the video?

@kaukolaDIY Год назад

Nothing was broken. All was original, but about 10 years old. I had this "yearly" (after every two years) inspection coming, i just wanted to be sure. And I also wanted to learn, how to do it.

@paulkazjack Год назад

@@kaukolaDIY Thanks mate.

@ghp0518 Год назад

is it really necessary to change the bolts also?

@kaukolaDIY Год назад

Some bolts are torque-to-yield bolts. I'm not a pro, and i don't know science behind that, but i think bolts, which needs to be very tight, should be changed always. It's recommended, that at least this big lower shock absorber bolt should be changed. Two smaller bolts are not so important to change. I almost every time order a new, original bolts, that's not so big investment.

@sallyfox3445 3 года назад

Do you have to lower the car before torque wrench ( tighten).. Thanks

@kaukolaDIY 3 года назад

Yes, it's recommended, that car should be standing on the wheels, when torque the lower schock absorber bolt to the spec. If i could drive rear wheels to the car ramps or something, i would have much more space under the car. 150Nm + 65 degrees is very tight.

@sallyfox3445 3 года назад

@@kaukolaDIY Thanks, never knew that. Great channel and well explained. Well done. 👌

@sallyfox3445 3 года назад

@@kaukolaDIY If you get around to doing the wheel bearing for the Astra J, please share.... Thanks

@stephenrickards5460 2 года назад

Can you do one on changing anti roll bar bushes

@kaukolaDIY 2 года назад

@@stephenrickards5460 i'll try to make a video of every service, that i have to do to this car. Unfortunately i can't do all by my self. I don't have all the tools, and some things won't be so nice to do outside.

@spacegirder4871 Год назад

You should show the view of the body of the car so that we know it's the right one we're looking for.

@kaukolaDIY Год назад

Sorry about that.. in my other video, you can see little bit more of my car... it starts around 1:30 of the video. Link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mR4ZgDJRaio.html

@jiribalog1156 Год назад

why ? cnoking? or wh at

@kaukolaDIY Год назад

This car's rear suspension was fine, nothing was broken. All the components were originals, and I wanted to change them. Basically just to learn how to do it. I had a knocking sound problem with front suspension.

@ghp0518 Год назад

@@kaukolaDIY Can a bad upper mounting bracket cause noise?. I have some noise coming on the back right side when going over bumps, looked at the bracket it seems to be in place, wonder if I should take it down and replace it. PS: My shocks were changed about half a year ago but not the brackets

@kaukolaDIY Год назад

@@ghp0518 i think it's possible, i had problems only with front bracket.

@AndreasKettern 13 дней назад

Top