How to Paint a Golf Club

Подписаться 17 тыс.

Просмотров 214 тыс.

50% 1

Paint your golf club using inexpensive automotive paint. Watch this simple tutorial video to learn how to paint your golf clubs using automotive paint and achieve a professional finish.
Learn how to give your golf clubs a fresh new look with this step-by-step guide on how to paint them using automotive paint. From prepping the club to applying the paint, this video will walk you through the process and provide tips for achieving a professional finish. Whether you're looking to personalize your clubs or simply want to update their appearance, this tutorial is a must-watch for any golfer looking to add some flair to their game
#golf #restoration #howto #diy
Do this at home!
*Brad Meehan's Product Page:
www.amazon.com/shop/bradmeehan
*How to Polish Golf Clubs: • How to Polish Golf Clubs
*How to Electroplate Golf Clubs:
• Electroplate Golf Club...
*Restorations and Tutorials:
• Golf Club Restorations...
***************EQUIPMENT***************
*********************************************
www.amazon.com/shop/bradmeehan
*********************************************
*********************************************
As an Amazon Associate I earn from qualifying purchases.

Опубликовано:

21 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 193

@BradMeehan Год назад

Try this at home! All equipment used in the video is here: www.amazon.com/shop/bradmeehan

@auddave100 Год назад

Hey Brad, great channel. Is there a corrosion inhibitor product you would recommend for reconditioned golf clubs. Especially likes of vokey wedges?

@BradMeehan Год назад

@Dave Mclean CRC makes a spray that I believe is just called "corrosion inhibitor". It's in a green can. I watched a lot of videos on rust prevention and this one came on top.

@allboutthemojo 5 месяцев назад

@BradMeehan can the shaft be painted as well?

@Friedasboss2001 Год назад

I think it would be to see you team up with John and Ashley from stacked golf a go hunt down a set and restore them together.

@thattrillYT 8 месяцев назад

Ew. No

@TheWiryWoodchuck 2 месяца назад

you mean staged golf ? where they pre plant clubs at garage sales and pretend they found them

@lucandria9090 Год назад

Dear Bard, every of your video are amazing. This one is astonishing! You really are a master in club restoration. Most appreciated is how educative your video are. No blabla (like most if not all video about golf and equipment), process and results only. Definitely a master!

@BradMeehan Год назад

Thank you, Luc. I hope that people see that the steps are easy to do at home as well!

@Master...deBater Год назад

@@BradMeehan Lol...now that's funny...since a Bard is literally a master of "blabla"! Just as you sir are a master of your craft!

@Gordon59 8 месяцев назад

That's amazing work that club is too die for.. Looks very SPANK!!!

@allboutthemojo 5 месяцев назад

@BradMeehan hello, I'm interested in doing this but I don't understand the products and the mix as well as where you are applying them in sections 1 :45 onwards in the video. The rustoleum and the red and white paint?

@16-bit-trip5 Год назад

Just the video I needed to see, thanks Brad! I recently snagged a Cleveland Launcher 460 from the thrift and I plan to repaint it along with a Titleist 975D that I was also restoring. I had tried painting the 975D but made some mistakes and needed to redo the whole process. This video will ensure I do better job once it warms up and I can paint them!

@BradMeehan Год назад

Don't be afraid to sand the hell out of it. You'll recover as you can see in this video.

@injuredtabletennisplayer1474 11 месяцев назад

Beautiful attention to detail.

@robertcornelius8056 3 месяца назад

Looks amazing

@williammcgeown710 Год назад

Amazing, got a not so expensive but still good driver that I'd like to refurbish, given me the inspiration, thank you.

@wadepatton2433 Год назад

Mas excellente! And also, with inspiration from here, I did the gold paint infill on a Wright & Ditson (St. Andrews) wood recently, my first ever. It looks amazing. I just happened to have some gold paint and a tiny brush in my shop "inventory". The most tedious part was cleaning the crud off the paint that was put on there--100 years ago. I used a watchmakers set of tweezers. I've gone fully bonkers apparently and am now rebuilding original hickory clubs for the pursuit of "old timey" golf.

@BradMeehan Год назад

That's great. It's such a rewarding hobby. Coincidentally, I just bought my first set of watchmakers tweezers and screwdrivers to mess with some vintage watches.

@donaldrippetoe5246 5 месяцев назад

I really enjoy the channel content! Learn something new or see a detail I previously missed with each video! It’s a great training resource! Thank you for sharing your knowledge and inspiring me!

@BradMeehan 5 месяцев назад

Glad you like them!

@nightsurvivor3673 Год назад

I have a pretty similar driver: 2000 Callaway Big Bertha Hawkeye VFT Prototype (rule-conforming). Looks just as stunning as that one. Hits amazingly well, too.

@dome204 Год назад

Man awesome job looks brand new!!

@804titan Год назад

awesome job... will be trying

@TheCar-diologist Месяц назад

Great work

@markbowes3970 Год назад

Brad that is remarkable finish. Amazing finish!

@BradMeehan Год назад

Thanks, Mark!

@marypar4 Год назад

Love this...going to try it

@TeeShotsOnly Год назад

You just answered all my questions about this!! Thank you!!!

@BradMeehan Год назад

Thanks, Simon! Please share!

@SpencyP92 9 месяцев назад

Spray max 2k clear is the best thing ever man. Painted multiple cars with it. Strongest clear I've ever worked with

@tonycrews2758 Год назад

Wow Brad perfect job as usual, been waiting for a driver restoration, 👌👌👌👌👌

@BradMeehan Год назад

Thanks, Tony. That clear coat is so good. 🔥

@UnfilteredGolfer Год назад

Love the content,not trying to knock you down.you and a few others actually got me started in this hobby...but my exact same experience with a tm r11s i painted black is that the spray max 2k clear needs to cure under a infrared light...or it never fully cures and makes the finish softish and very easy to chip or ding...also a light water sanding around the taped edges before clear coat ,eliminates that paint lift when pulling the tape off..just my findings. i will experiment with powder coats..

@BradMeehan Год назад

This is a good tip. I'd like to hear more about your experiments with the powder coating. I want to learn that.

@bygeorge4340 22 дня назад

Yoo, that is sick ! I have a 906f2 5 wood I just bought on the cheap that I want to restore .. Love your work and the step by step instruction 👌 👌

@CGF1214 11 месяцев назад

Brad, your work is amazing, I would really like to see you complete a whole set

@BradMeehan 11 месяцев назад

Thanks. I've done full sets but I honestly get so bored after about the 4th one. I need variety!

@nickwatson6723 Год назад

Your videos have inspired me to tinker around with my old clubs before ditching them for something new! Just took the white paint off the crown of my TaylorMade R11 hybrid and looking to paint it black

@BradMeehan Год назад

Let me know how it goes. Thin coats is key!

@tmo4330 8 месяцев назад

How did it work?

@garymorris1856 11 месяцев назад

Nicely done, it turned out beautifully.

@BradMeehan 11 месяцев назад

Thank you, Gary.

@garymorris1856 11 месяцев назад

@@BradMeehan Welcome, sir.

@Buffaloco Год назад

Amazing!!!

@davidchipman7612 7 месяцев назад

Excellent work

@BradMeehan 7 месяцев назад

Many thanks

@danmartin3714 Год назад

Very Cool!

@chipnputtdotcom Месяц назад

Great video! Thanks!

@matthewchase6744 8 месяцев назад

Great job

@noblenotes27 Год назад

Very professional job

@BradMeehan Год назад

Thanks, Larry!

@werquantum Год назад

Magical!

@marybetheby5184 Год назад

I just did this to my mini driver that got dented when my bag fell off the cart in the parking lot.I even filled and primed a tiny dent and it looks perfect!All about prep and taping meticulously..

@BradMeehan Год назад

That's awesome. And it feels good to say you did it yourself.

@jeffparnell5916 Год назад

Unbelievable! This is amazing. I'm doing a set of muirfield 20th anniversary blades... Wow

@BradMeehan Год назад

You can do it!

@GarethDavies-tt3eg Год назад

Hey Brad, What would you use to remove scratches from the face of a driver/wood? Is this different to removing them from irons?

@user-ck3bb5iy6k 8 месяцев назад

amazing!

@mglennon5535 11 месяцев назад

Kickin!

@Mowers11 8 месяцев назад

Well done good craftsmanship very nice paint job and I am a professional painter. How would you go about restoring the Chevron mark for the center of the club?

@joepalmer3241 6 месяцев назад

I'm very impressed. The tape line around the face is impossible to me. I remember from restoring persimmons back in the day. You definitely added value to the club. The best part is the shine you got with that freaking rattle can paint. I'm going to buy that clearcoat and try it on my Taylor 200s.

@BradMeehan 6 месяцев назад

The 2K clear coat is really the secret to it all. Once it cures, it's super durable. I've been using LimeLine fine line vinyl tape for the tight curves and it works great. Check out my latest video where I paint the club like a lowrider and you'll see some pretty nice curves I got from that tape.

@awilson8940 Год назад

Hi Brad. Love your videos. I just did this with an old MacGregor Driver. Could help but think during the process if I should be lightly sanding (like a very light wet sand) between coats of paint for better application of the next coat??? I didnt sand, but I did the tack cloth between coats, and seems to have worked out just fine.... but would like to know what you think....

@BradMeehan Год назад

I have a video of MacGregor 3 wood. Between coats, I scuff with steel wool, and it comes out great.

@BaltimoreJak 11 месяцев назад

Strong work, but how does it hit? Curious to see if face refinishing effected performance.

@Superutubeking Год назад

Thanks Fantastic

@jfull1914 8 месяцев назад

Your commitment to hand sanding is admirable. I don’t have that kind of patience 😅

@BradMeehan 8 месяцев назад

Most of my huge screw ups were due to me overdoing it with power tools, so i had to back off. I get too carried away with zero ability to control it. Plus, it's very therapeutic for me to shut off the phone, listen to some vinyl records, and zone out for a bit while sanding.

@donaldrippetoe5246 8 месяцев назад

Your channel is awesome! I learn something with every video! Thank you! Did you buff out the club or just sand it this time?

@BradMeehan 8 месяцев назад

Just sanding, but I used a green scour pad to soften the sanding lines a bit on the bottom.

@Friedasboss2001 Год назад

Great video! Just found an old Ping answer putter. How would you go about restoring it.

@BradMeehan Год назад

Thank you. Check out my Ping 1A video. That should work for you.

@stevetilk4926 Год назад

Stunning results. Can I bring my car to you? My bumper has a scuff so I think you’re just the right guy to fix it.

@inhapark6685 9 месяцев назад

솜씨가 좋습니다. 2액형 우레탄 페인트를 사용하여 멋진 복원 작업을 하셨네요.

@kirbymarsh 9 месяцев назад

any ideas where a guy could find the decals for the top of the driver head? i have scoured the internet with no luck!! your vids are great btw!!

@joshwilliams446 11 месяцев назад

Cant sanding the face of a club change change the way it performs? I'm genuinely curious because u make this look easy and do an amazing job

@rlake349 Год назад

Good work. My only advice would be to use a low tack tape on the bottom like frog tape, this way it won’t lift fill-in work. Well done!

@simopeltonen6457 Год назад

🤗 Thanks a lot

@gregboggs4721 10 месяцев назад

When sanding the face and metal bottom you can use WD 40 as a lubricant, works really well.

@BradMeehan 10 месяцев назад

Thank you. Yes! That worked great on the shaft restoration video i did to help lubricate the steel wool, too. There are so many great uses for that stuff!

@nickjohnson8246 Год назад

Awesome work, Brad! Only question I have is if you consider sticking a logo or something on the new paint for alignment before applying the clearcoat.

@BradMeehan Год назад

Hi, Nick. Since the base coat had texture, you'd lay down a layer of clear, let it dry, apply the vinyl logo, then clear coat thicker layers on top of it. I don't have a vinyl cutter (like the Cricut, or similar) at home but that'd be a good choice for that application.

@nickjohnson8246 Год назад

@@BradMeehan Good info! I had some old Snake Eyes woods from Golfsmith that I played in high school I am about to reshaft. Fairly dinged up. I may try this method. Every so often I would look at them and get sentimental. Interestingly, they explain why I can't get my old Nike VR Pro Limited Edition 3/5 out of my bag. Same shape. They don't make em like they used to!

@DookieCyber 10 месяцев назад

Very nice video. You even spent the extra $$ on 2k clear. Nice

@BradMeehan 10 месяцев назад

It's good stuff! Thanks for watching!

@WatchWatchlist 8 месяцев назад

Can you do mine next? I have a old ping g10

@biggregg5 Год назад

I did something like this on a full set of woods that I used for a while then passed on to my daughter since the gapping between them was really better for her. I repainted in pink. The mistake I made, I think, is that I used your basic Krylon primer, paint, and clear coat, and while they turned out quite pretty to look at, they chip easily. Does the etching primer, automotive paint, and two part clear coat make it so it adheres better and dries much harder than what I used? Is that the reason you chose those products? Excellent outcome, btw. I do see you flirted with a problem that I did. I figured the more coats the better, but that created a problem when removing tape. I ended up redoing a couple, and used paint and clear coat more sparingly ip against the tape, and the transition was better.

@BradMeehan Год назад

Good catch. Less is more around the edges I've found, or pulling that tape is tricky.

@redhed9776 Год назад

well done...that driver is still usable, especially with new ones running $500+

@BradMeehan Год назад

Definitely. This ERC 2 is the club that was deemed 'non-conforming' because people were hitting it TOO FAR because of the club face was too hot: www.chicagotribune.com/news/ct-xpm-2000-12-19-0012190186-story.html

@grahamsmith7407 11 месяцев назад

Hi Brad, Amazing videos, do you restore clubs for others for a charge?

@BradMeehan 11 месяцев назад

I just do this for fun to show people how to do it at home.

@grahamsmith7407 11 месяцев назад

@@BradMeehan ok great thanks!

@adamg4006 Год назад

Hey brad. Would like to contact you in regards to your process in buffing and polishing irons. Just bought my whole set up and would like to receive some guidance.

@BradMeehan Год назад

Shoot me a note here: Brad@BradMeehan.com

@trxe420 Год назад

Does this work with carbon as well, or is there anything to be aware of? I have an old TM M2 that I kind of want to mess with, maybe change up the color scheme completely

@BradMeehan 11 месяцев назад

You can paint that too. But the primer I used was specific to metal etching, so you may just need a different primer that's compatible with the carbon fiber.

@tbearsdaddy Год назад

Have you tried to refinish or refurbish any of the black or gun metal irons?

@BradMeehan Год назад

I haven't found a material that can stand up to the wear and not scrape off. I've tried black nickel, Cerakote, gun metal bluing, but they all seem to scuff pretty quickly.

@swingping 3 месяца назад

Does the 2k clear cure to a harder finish...the regular rustoleum clear stays kinda soft even after a couple days...I scratch it off with my thumb nail cleaning off acrylic paint fill

@BradMeehan 3 месяца назад

It's like a rock when it cures. It's really good stuff.

@jrkevin168 Год назад

OMG‼️from Taiwan

@bigpardner 3 месяца назад

If there are no decals available wonder if you can draw the symbol on some tape, carefully cut it out and use as a stencil?

@BradMeehan 3 месяца назад

Yessir. Even easier, ask around if any of your friends or wives has a Cricut. They're really popular for crafts. I used one in my latest video to cut vinyl and do that exact thing. There's a link in the description to my equipment page if you want to see what it looks like.

@f_kyt 9 месяцев назад

A lot of work but it looks great

@stevetilk4926 11 месяцев назад

Your video has inspired me to refinish my Cleveland 3 hybrid. One question, you went to the pains to strip much of the paint of the club but yet quite a bit remained on the top. Why not remove it all to have a clean slate?

@BradMeehan 11 месяцев назад

Mostly laziness. My reasoning was that it already had a strong bond to the metal, so if I scuffed and smoothed it I could achieve a good finish and still have good adherence. I do the same with the irons; that is, i leave any remaining nickel on the club because that's just less nickel I have to lay back onto tit.

@stevetilk4926 11 месяцев назад

@@BradMeehan thanks. I’m going to tackle my hybrid next week. Your step by step process on the driver made it look pretty easy.

@stevetilk4926 11 месяцев назад

Brad, thanks for doing this video. I refurbished my 3 hybrid and it came out really nice. I may tackle my old Cobra 3 wood next. You demystified the entire process which made it so easy and rewarding. I hope other guys are equally inspired.

@stevetilk4926 5 месяцев назад

Hey Brad, my hybrid came out really well but despite using a head cover after every shot, I’m seeing ding in the finish. I think I used the wrong clear coat. So I’m going to refinish it along with another club during Christmas. Do i need to resand the club or can I just strip it and respray?

@stevetilk4926 5 месяцев назад

Brad, I decided to tackle two other clubs and to redo my hybrid this weekend. I followed your directions to a tee and the results are fantastic! Many thanks for sharing how we can do this in our own garages. I can’t wait to show off my “new” clubs to the boys at my course. Happy New Year!

@billcox199 Год назад

Nice job ,the materials are expensive though for one club.

@WatchWatchlist 8 месяцев назад

Yeah I was just thinking that. Might be too much for my budget to attempt.

@jwilsnach 16 дней назад

How well did the paint hold up

@BradMeehan 16 дней назад

It held up great until I lit it on fire for an experiment. I'm making a driver with flames and skulls and wanted to see what the burned clear coat would look like over it. (Spoiler: it looks like burned clear coat)

@patrickcollisson8819 7 месяцев назад

How would you leave a matte or flat finish on the club?

@BradMeehan 7 месяцев назад

That's my next video. You use the bead blaster with glass beads. You can use the cheap handheld blaster in the equipment links if you don't have a cabinet. I use it in my videos and it's like 20 dollars or so.

@bowler0328 11 месяцев назад

Hi, what do you apply on the paper towel to wipe after applying paint?

@BradMeehan 11 месяцев назад

Wait. Did you mean on the top or bottom? Top is a tack cloth to pick up lint. Bottom, I use acetone to clean up the paint fill in the lettering.

@bowler0328 11 месяцев назад

@@BradMeehan thanks

@rrjsc 8 месяцев назад

Impressive, one could make a side hustle by going to the thrift store, grabbing used clubs and restoring them like this

@BradMeehan 8 месяцев назад

You can make a ton of money doing this. Even just a quick polish would 10x your return easy.

@JWxUK 8 месяцев назад

Is auto paint tough enough to deal with the golf bag life?

@BradMeehan 8 месяцев назад

The 2K clear is the key. It gets really hard after it cures. Don't confuse it with hardware store "2X clear".

@Ghost-Of-Kyiv- Год назад

2k max hold up ok?

@jrseitz21 10 месяцев назад

Did you do any other sanding on the club face? Or just straight up 120 and done?

@BradMeehan 10 месяцев назад

120 and done. If it looks too aggressive, then you can go up another grit to 400 to tame it, but I'd still start with 120. You're just trying to make uniform looking lines rather than remove metal, so there's no need to overdo it.

@jrseitz21 10 месяцев назад

@BradMeehan cool thanks. I'm experimenting with a little restoration on some cheap clubs just for fun. Worse case I'm out some time and 20 bucks 🤷‍♂️. I didn't wanna break or wrecks something good.

@BradMeehan 10 месяцев назад

@jrseitz21 This is the best approach - i practice on a junker, ruin it, try again, ruin it, try again, perfection. Also, that 2K clear coat has about a 2 day lifespan after you mix the two parts.

@jrseitz21 10 месяцев назад

@BradMeehan I've heard as much. I do other hobbies and models and have read about that stuff. Never used it yet. But thanks for the heads up.

@patrickcollisson8819 8 месяцев назад

Say I wanted to turn a set of 704 cbs black, and I visibly want the finish to last, what would be the proper way, and what would be the easiest way?

@BradMeehan 8 месяцев назад

This is the video I'm working on now!

@patrickcollisson8819 8 месяцев назад

The video I commented on, or a new one?

@BradMeehan 8 месяцев назад

@patrickcollisson8819 Sorry, I mean I'm filming it now.

@jeffwilson1532 Год назад

Where did the arrow go on top of the club head?

@BradMeehan Год назад

RIP the arrow

@paulgoy9325 11 месяцев назад

That’s a good job but why didn’t you tape up the v shape on the top of the club

@BradMeehan 11 месяцев назад

It wasn't worth saving

@G2niverse 9 месяцев назад

Looks great, would have removed the shaft though... Ferrule looks a little beat.

@BradMeehan 9 месяцев назад

It's a junker club, but you get the point. It's more of an exercise of showing how to use auto paint and 2K clear instead of just Rustoleum. Also, I MURDER ferrules. I'm the ferrule hit-man at this point.

@lls3289 4 дня назад

What did all these products cost? Just the paint and primers would be nearing $50 alone.

@alanduncan9204 Год назад

great job. only one thing is that club legal ? it might have a springy face.

@BradMeehan Год назад

It's not legal. It even says non-conforming on the heel. The history of this club is pretty cool. Arnold Palmer got involved to advocate for it for amateurs

@alangibson4499 Год назад

good video, i use the wifes nail polish works great and i dont have to buy it lol

@BradMeehan Год назад

And way more color options!

@dcgl1tch439 Год назад

How does the paint stand up against nics and hits?

@BradMeehan Год назад

The 2K clear is tough. It's automotive quality, but as someone mentioned below, you really need to let it properly cure.

@dcgl1tch439 Год назад

@@BradMeehan thanks! Do you have any other recommendations other than the 2k? It seems like its hard to find in my country

@BradMeehan Год назад

@@dcgl1tch439 Are you able to buy automotive clear coat from an auto paint supplier or auto parts store? If so, there is a something called a PreVal refillable sprayer you can use to spray the clear coat if you don't have a proper paint gun (I don't)

@mattcradduck197 Месяц назад

Is reaching bare metal throughout a requirement?

@BradMeehan Месяц назад

Nah. I just wanted to make sure the surface was etched for the primer to adhere. If it's already in decent shape, just thoroughly scuff it.

@mattcradduck197 Месяц назад

The two part clear coat is best?

@BradMeehan Месяц назад

@@mattcradduck197 the best.

@fitcwebb 10 месяцев назад

Was your only work on the face done with 120 grit sand paper? I want to try a whole driver head raw, unpainted, but not sure which grit would be best

@BradMeehan 10 месяцев назад

Yes, but you can 'tame' it after you sand it with a green scour pad you use to wash dishes to dull the lines. I like it a bit more subdued looking, but that's preference.

@Zim-wc2rs 11 месяцев назад

Please get ahold of Rick Shiels Golf and have him play some of your restored clubs!!!!!!

@BradMeehan 11 месяцев назад

That would be awesome!

@christopherbyrne18 Год назад

Nice job,.but seems like an awful ball ache for a club that's worth $4

@BradMeehan Год назад

*$6.

@robertaupton3221 5 месяцев назад

Wrong colour? Big paint edge too.

@BradMeehan 5 месяцев назад

You spelled color wrong.

@sotongh1 Год назад

nice job.. but too much work for an old driver.. I would just buy a new one..

@BradMeehan 11 месяцев назад

bruh.

@hugsnkissesnursery67 Год назад

the white v on crown is now missing and also there is no serial number anymore so people may say it’s a fake

@chuckwalla2967 Год назад

I don't think anyone would care on an old club like this.

@TheMedic2014 9 месяцев назад

I started Thinking I could do this myself then I realized not gonna happen.

@BradMeehan 9 месяцев назад

I'm a self-diagnosed moron. If I can do this, you can too. If you screw up, you can just sand it away and do it again.

@okolemahu 2 месяца назад

Looks great but lots of work.

@grungekap 8 месяцев назад

Let me just spray black paint over this white rug instead of just going outside

@BradMeehan 8 месяцев назад

Thanks, Rug Doctor. It's a puppy pad.

@markcoleman8568 9 месяцев назад

Great job on restoring however that driver was unhitable

@derekwhyle1884 11 месяцев назад

Why ? You could buy a decent used one for 5he price of the materials used

@BradMeehan 11 месяцев назад

Thanks! Spread the word - please share your favorite videos with friends!

@ptech88 9 месяцев назад

I think it’s easier to buy a new club.

@BradMeehan 9 месяцев назад

Maybe this is more your speed: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-p_R1UDsNOMk.html

@ptech88 9 месяцев назад

@@BradMeehan takes more skill than sanding a golf club

@jamesx2703 9 месяцев назад

I'd be too scared to use it! I bet the materials to repair this cost a small fortune. Great job though

@BradMeehan 9 месяцев назад

The auto paint was 8 dollars I believe, but the 2K clear coat paint was over 10 dollars. The rest is just sandpaper and tape. Maybe plan to do more than one club at a time so you can reuse the 2K clear coat. Once you puncture the can to mix it, it has about a 2 day shelf life.

@beng4647 7 месяцев назад

This is a waste of time. The paint doesn't last. He did a hell of a job though. 😁

@BradMeehan 7 месяцев назад

The 2K clear coat is the key. Once it cures, it's hard af.

@thedopeygolfer7364 9 месяцев назад

Nice job but a crummy club.

@BradMeehan 8 месяцев назад

Haha. *Illegal crummy club.

@eddiestorey9633 Год назад

Way way too course of paper ffs 🤦‍♂️

@BradMeehan Год назад

What grit do you recommend for etching titanium, not just scuffing old paint?

@ultrapail 10 месяцев назад

Looks good except around the hosel. Hell of a lot better than I could ever do!

@LeeSmith-dx7gg 9 месяцев назад

Excellent job however the edges could’ve been crisper. Blending the edges with wet/dry and remarking before clear application would fix it. Brilliant job though!

@BradMeehan 9 месяцев назад

Thanks. Quick question. Assuming I've cleared a club already with a lot of clear (on purpose). Can I wet sand down to the tape before peeling it? Would that help with the edges? I'm fearing pulling the tape on this one.