How To Paint Brake Calipers & Rotors Without Removing Them - Best Way To Painting Calipers On Car 

Love it, just be careful with holding cars up with cinderblocks. Two cases in the last year here in North Carolina of cinderblocks crumbling and pinning someone under a car. Both survived but with serious injuries

I 100% and a fan of your channel. Your painting skills are superb. With that said painting your brake rotors and the calibers... Never, ever paint a brake contact surface. Yes brake pads will burn off the paint from the rotor but in doing so it contaminates the brake pad and we'll lead to glazing. Blazing is basically slick spots where all of the porous components in the brake pad have now been filled in with a substance. This reduces your ability to brake and increases the distance it takes you to stop in any situation. I like my car to look good... It doesn't have to look half as good as much as it has to stop though. It don't even have to roll but it damn sure has to stop. That is the most important part of any car. So I'm going to recommend that people don't do this. If you want to paint the center hub of your rotor mask off. If you want to paint the brake caliper, take it off and remove the pads hang it inside the tire well. Just do not paint your damn braking surfaces 🤦. This has been a PSA that could save your life.

Been watching this man for many many years! That’s how I started painting at home and I’m painting all of my buddies cars! Thank you !

I like how you took the time to protect the surrounding area from the over spray, pro job excellent work!

That looks good 👍

Swear you responsible for so many ppl getting they cars/trucks together. I use the red scotch bright 3” ball that attach to drill. $8-10 at O’Reillys

Now the brake system looks very clean those small details really pop out when admiring the rims.

Great job as always. I've learned so much from and enjoy watching ALL of your videos. Much love from Rocky Mount, NC. Keep up the GREAT work and post more if u get the chance!!! 👍🏾

Thanks for the tip about the oven cleaner. Old dogs do learn new tricks. Keep em coming. Love them and Thanks for sharing

& Just sharing a old school trick Sometimes using tinfoil to cover up suspension parts is ez too By the way you inspired me to use Big Flakes on this n that like I did my Eldorado taillights after putting thinned down black on them and then rainbow flake in clear over them I was surprised how many people didn’t know about metalflake they liked it It got noticed 🤔

Thank you as always for allowing your skill flow to our minds through your craft.

Austin tx here, always learn so much from you. painted my 24s for the first time from watching your videos. always breakin necks with them... keep doing what you do. much love n respect ✊🏽 finna do my calipers next now 😂

Nice job man looks killer amazing how doing a tiny detail like that makes the car look so much nicer and finished off …cool car to 👍

Great work and video 👍🏻as always!!! Hey in your next cut and buff video can you go over how often you change the the sand paper and how you take care of your buffing pads or if you buy all new ones every time? I think that would be good content for your videos thanks so much for all your videos I’ve learned so much!!!

Love this red , so beautiful .

Getting started ...follow this project all the way through

Hey ,Thanks Sprayway ,I picked up some more knowledge again today from you your amazing my freind. 👍

Amazing work and great teacher

That was out standing sprayway looks really nice thanks for the video

Finally, Walmart bags are good for something other than the small trashcan liners. LOL. Great job brotherman.

Heavy duty Aluminum foil works great for this kind of stuff.

nice to watch someone who knows what their doing.....

Looks good. Just something simple that makes a big difference.

Awesome finish and exactly how I've been doing them for last 20 years 👍🏻not sure if you've noticed or changed them now but at end of video both front wheels are on the wrong side as rotation arrow on tyre wall pointing the wrong way. Loving the 22's they look fantastic 👍🏻👍🏻

Looks awesome, I want to paint mine red, yellow is under consideration, and I'm gonna buy black Rims it's gonna be lit!

This video is just in time, I’m about to do this on my 04 grand marquis

Always excited to learn something new from you, two project cars I have, don’t know which to work in first

Sprayway the truth

Anytime I get a new video notification I know it’s gone be a hit from the goat

That Beemer coupe looks great👍 You did everything the same way I did mine, for exception of I didn't use a spray gun. I used aluminum foil to mask off the calipers, it molds right to it🤣🤣 Great job bro!! 👏👏👏

thanks for this

Man that BMW looks good. One day I'm gonna do mines.

Saying hey from up in Seattle 👍 Love & Appreciate your videos & you got such a knack for detail ! That’s a nice red

Love your how to videos brother. Thanks

cheaper than brembo brakes with the same look awesome 👌 job

Took me 4 days but dammmmmmm .....🍻😎you make it look so easy 😂😂😂

Looks good man!!! I need to hit mine again...it's been about 4 years

just grabbed a set of junkyard blazer brakes & came to see the master at work...

I wish I could show you what you just teaches me I have a benz I painted hub on rotors gray no more rust looking shit and my calipers that is green with back of pad gray as well took all apart .. I all so had lil spade stickers right size 3 on each .. THANK YOU ... really made my car look new again 🍻🍻🍻🍻🍻 Your the man .🍻🪶

Excellent work, they look absolutely amazing 🇬🇧👍 well done

That’s nice there bruh….. keep doing ya thang homie 🔥🔥🔥🔥like the whip too👌👌👌

BMW sitting nice perfect thats the way i want my TL sitting

That spray paint might glaze your pads out. Let it dry and use some laquer thinner to clean the brake pad contact on the rotor.

that's one clean BMW

Looks great 👍🏻 Legit work here no b.s straight to the point 💯

It’s hard to believe you have time to do something on your vehicle’s looks good bro

there's power sanders and power drill wire brush attachments abs sets for this

Cleaning her up, looks good man. Good video sir.

Wow! Those calipers look exceptionally beautiful! How are the coatings on them - and the rotors - holding up under the heating effects of braking after this time?

Tuned In

great job

🔥 🔥 🔥

Nice Job

Wow those wheels are so sick man. I love them

You did that bro look good than powder coat

Looks good. Great work

Now that is cooled

Bro,is there anything you can't do,In my Big Red voice from the five heartbeats lol,amazing as always keep up the good work 👏 👍 👌 💪 🙌

Man you showed me something with that oven cleaner

Good job, I ll stick wit the easier for me spray cans was always bout gettn that paint on the rotors thanks fa the video👍

I gotta I love your videos bro, there extremely educational without boring you to sleep. You did this video just in time because I've been considering painting my calipers on my kona which is white so the red should look great. The decals you used, do they last and where did you get them? Thanks again for the videos👍👍

Not even interested in the least to learn how to paint but keep finding myself watching your videos. LOL It's like they're addictive or something. Got a question though I have a 1970 Chevelle hardtop in the process of being restored looking to do a red base coat clear coat with white stripes what colors do you recommend the brighter the better meaning the best paint brand and name of that red and white paint. My RU-vid cover photo is the color I'm going for.

Great job

Dope video. I painted my rotor fins, center and calipers. Real clean look I just did the rotors off the car since I was changing everything anyway.

I hit the like button before I watched the video ,nice work!!!!!!!!!!

Always coming through with another great video 💯💯 #SparyWayCstoms

I had no idea you could paint rotors

Nice ride

I like the way u do these

Looks good

Finally 🔥🔥

Looking clean 👌strait pimping on them twenty two, s!👍

I wanna do this to my ride. But I've heard that I can't use regular paint and it must be high temp paint because the rotors and calipers get very hot. Please let me know if all is well after this man

Very nice

Hi, how do these look after braking on them?

OKC-Love your work bro 👍🏿👍🏿

Every time!!!

Nice work as always. However, it's a shame they spent all that money on nice wheels, but didn't get some cross drilled rotors to really set the whole package off. And, did anyone else notice that near the end of the video, that the left front tire is mounted so that it's rotating in the wrong direction. (Or that it should have been on the right front.) Just a detail I noticed... Great quality work though!

Thanks, looks great !!!!!!!

I been wanting to paint mine yellow for the longest !! Good looking on the vid OG.. what size air compressor do you have ?

that thing is mean!!!

Another one ☝️

Bruh I gotta get in the game FRFR

Looks great nice video!

Good vid bro

Good job bro

So if I use spray paint cans I don’t have to mask off my car because it just got a new paint job

I didn't know u could paint rotors I figured that would affect braking ability?

Beautiful car brother

Whenever I touch up my calipers I need to do the same with my rotors

Thumbs up SprayWay!

Isn't the paint on the rotors just going to wear off when you step on the brakes?

Huge fan and i say this with all the respect in the world, you NEVER EVER paint brake rotors contact surface, your gonna get some one killed!

A1 work

So getting paint on the rotor surface doesn't cause any issues with stopping?

question if you paint the disc when you stop the brake the pain not scratched?

Wow! That was great but much easier than removing that caliper wow! Your the man! By the way, mine is a Toyota Rush 2020,a suv, ive been planning to paint its calipers i subscribed here on your channel, Thanks!

Now that sit that car off 🥶

Grinding

The driver's front wheel is mounted on the wrong side.