No video :(

How to Paint Interior Trim Pieces

Подписаться 389 тыс.

Просмотров 2 млн

50% 1

In this video, I demonstrate how I paint my interior trim pieces to my car. I go through the entire procedure, from beginning to end.
Check out How to Removed my Door Panel and all of its components ▶︎ • Removing Components on...
PRODUCTS USED 🛠
3M 400 Grit Wet-or-Dry Sandpaper ▶︎ amzn.to/2cBe9kW
3” Random Orbital Polisher ▶︎ amzn.to/3kbvML3
3M Hookit 3” 320 Grit Sandpaper ▶︎ amzn.to/2depKbT
3M 3 Inch Interface Pad ▶︎ amzn.to/2dpvcoU
Grease and Wax Remover ▶︎ amzn.to/2cBdMXg
Duplicolor Grey Filler Primer ▶︎ amzn.to/2d75hRr...
Sand-able Primer ▶︎ amzn.to/2drVsBJ
Duplicolor Enamel Red Paint ▶︎ amzn.to/2cBcLhT
Duplicolor Enamel Clear Coat ▶︎ amzn.to/2d76Hva
3M Trizact Hookit 3” 3000 Grit Foam Disc ▶︎ amzn.to/2drVr0P
Meguiars 3” Microfiber Cutting Disc ▶︎ amzn.to/2dpwJuX
Meguiars M105 Ultra Cut Compound ▶︎ amzn.to/2cV7jK3
Meguairs 3” Microfiber Finishing Disc ▶︎ amzn.to/2dpwd0d
Meguiars M205 Ultra Finishing Polish ▶︎ amzn.to/2cZvzXh
Meguairs M21 Mirror Glaze Sealant ▶︎ amzn.to/2dpv9sY
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms...
milanmastracci RU-vid Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
How to Install Aftermarket Headlights & Grill ▶︎ • How to Install Afterma...
PlastiDipping Wheels 4 Different Ways ▶︎ • DIY: PlastiDipping Whe...
______________________________________________________________

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 922

@ronaldboutan2511 8 лет назад

Your videos are exellent. You stay on the subject and you dont waste time.

@milanmastracci 8 лет назад

+Ronald Boutan Thanks Ronald :)

@TupacAurelius 8 лет назад

+milanmastracci Is that your real voice? You sound like a 14 year old lmao

@TupacAurelius 8 лет назад

Just kidding

@milanmastracci 8 лет назад

LOL Listen to me at the beginning of the video.. I sound WAYYY younger than 14 lol Don't ask me why ahah

@samdish7036 8 лет назад

+milanmastracci why ? Just kidding buddy, but hey.. It's kinda complicated, how much do u figure you'd charge to do it all ?

@psdaengr911 8 лет назад

If 600 grit or equivalent scotchbrite is used, primer isn't needed to "fill grooves", just for paint adhesion. If the painti is scuffed instead of aggressively sanded, it can be repainted without priming using the same type of pain, just as you would co!orcsand an exterior finish beween coats. In this case, care must bde taken to limit overspraying the edges of the parts, as buildup may cause a tight fit and lead to chipping. If sanded down to bare plastic, you have two other options. Duplicolor has spray paint specifically designed for painting plastic. Several companies make vinyl paints aka dyes to match a wide variety of interior auto finishes.

@littledaniels1083 6 лет назад

My love did this to his Charger, and it look so Amazing! Red is definitely a fun attractive color.

@vaggelissideris10 3 года назад

Why to do all this job for a phone charger?

@jfresh2054 7 лет назад

a week later, you finally can move on to the next trim piece

@Lunababy9986 7 лет назад

Thank you for this! I really want to re-do the interior details of my car and this was incredibly helpful.

@jonathanchung7209 8 лет назад

One of the best DIY's I've seen on youtube. Information rich, clear, thorough and well presented. Great job. I look forward to seeing more videos of this quality.

@milanmastracci 8 лет назад

+Jonathan Chung Thanks Jonathan for the nice works :)

@mitshylebrun2205 7 месяцев назад

@@milanmastracciis it best to get the paint with the gloss mix already or get the color and gloss separately

@TheRocketbob22 5 лет назад

Great job Milano. I did this on my dash and a few select pieces in yellow over gray in 2005, it is 14 years old. Still looks better than good. I may redo it because better products are avaiable today than 12 years ago. A quality paint, good color coordination, makes your vehicle uniquely yours, and I am 50 years older than you.

@MickeyMaguire 8 лет назад

Wow! A young man who is articulate and thorough! Well, well done young sir, WELL DONE!

@michaelmaclane5004 5 лет назад

Fuck off, boomer. NO ONE cares what your worthless generation of self absorbed half wit's thinks about them, or anything else, for that matter. Your praise means absolutely nothing, your criticism even less. Wanna know where you rank in all of that? Probably not, lol.

@Ilovejoeyd95 9 лет назад

i didn't watch this video for the learning of how to do this, i saw this and thought oh boy lets see how bad of a job this guy does and i was proven wrong, you did a amazing job.

@milanmastracci 9 лет назад

cody N Thanks man!! :D

@Automator75 8 лет назад

+milanmastracci Good job indeed!

@TheYz250fmf 8 лет назад

I literally did the same thing and he seriously did do an amazing job...

@Jeetkat 8 лет назад

+TheYz250fmf same and i just came from b is for build so my hopes were not high for the youtube auto community and i was proven wrong

@hectre13 7 лет назад

same haha!

@samdish7036 8 лет назад

Am glad this comment section has a mature non profane audience. And car lovers too lol

@TheHyena-ru8bz 7 лет назад

One of the most thorough and excellent RU-vidrs to exist!

@AIHurrell 8 лет назад

This is the first video I've seen by you and I must say it is quite impressive. Good production, and you get straight to the point without any unnecessary waffle. I've subscribed and will have a look through what else you have already - thanks for the upload :)

@milanmastracci 8 лет назад

+Cookeh Thanks buddy!! :) And thanks for the sub!!

@codeyhanna767 8 лет назад

Thanks mine were silver and now black. black tahoe with black trim and leather. Looks great. Thanks to youtube and vids like yours I've done a ton of mechanical work

@realLuisGiordano 5 лет назад

Thanks for the video. It was of great help when I painted the black plastic door handles in my car to match the body color. It was a long process, but the quality of the job was on par, or even better, than factory painting

@andymartinez1288 7 лет назад

Dude. I watched this for no reason at all. But you do great tutorials and the fact that you put all the links just made me subscribe to you. Keep going!

@Light_Worker 6 лет назад

I really like the way your red trim looks with black, it's not too much it's just right. Beautiful job young man. I am proud of you !

@nathansegurakennedy8607 8 лет назад

Bro I love your positive energy..Do what you love, love what you do. Peace

@travisanthony9093 7 лет назад

Painting's no fun if you dnt get high during the process

@ItsYaBoiThomas 5 лет назад

⚀⚂⚄🚗

@Lonestar.Nick30 5 лет назад

BROOO I WAS LITERALLY DOING THAT BEFORE I HOPPED ON THE VIDEO LMAOOO

@WayToManyAssassins 5 лет назад

I'm high anyway

@eksine 4 года назад

2K clearcoat will be permanently stuck inside your lungs, permanent lung damage. also it contains chemicals if you breathe too much in you literally will drop to the floor DEAD. is that the kind of high you wanted? high to the sky cause you're dead

@andrewlawson3798 4 года назад

High to the sky sounds like my type of high fo sho! 😎🤜🏼

@sbrochew4699 5 лет назад

This video shows the right way to do things. Not cutting corners, LAYERS! Time well spent and the end result is what everyone looks for but a lot of people do not go that extra "bit" to get there. Great job, great video. Would love to know what your cost of materials is. Tools make a world of difference and the orbital makes the job MUCH easier but, I am more curious what the line up of chemicals cost. Obviously I can do the work to figure it out, didn't know if you may know off hand though.

@nobrakes500 7 лет назад

To the point, crisp...great that you don't go on rambling like others out there. Keep up the good work!

@StonnieDennis 8 лет назад

Excellent work!

@milanmastracci 8 лет назад

+Stonnie Dennis Thanks :)

@nstorm390 3 года назад

This is a very good and well edited video you've made. Very clear and concise!! Excellent work. I feel confident in doing this now. 🙏🙏🙏

@joeylongo1843 8 лет назад

not much a car guy, but that interior looks sick! I respect that the red is not over done. Great video

@milanmastracci 8 лет назад

+Joey Longo Thanks Joey :)

@chrisrigsby8935 Год назад

Best video I've seen for painting interior plastics! Should make a video next on how to do the textured plastics on the interior, that would be really handy!

@wardind506 8 лет назад

Make sure you have your battery disconnected before you unplug the airbag connector, and leave it unhooked until it's plugged back in. Otherwise you get a code on your airbag system and it's a bitch to get reset and can normally only be done at the dealer

@jacobstoddard6207 7 лет назад

Ben Ward it would be just ur negative terminal right?

@wardind506 7 лет назад

Yeah that's the best way to do it

@Palvader 5 лет назад

Great job man, I could mistake this for a ChrisFix video!

@isrealdiaz5381 8 лет назад

the most helpful video uve came across so far ready to paint the interior on my z4

@milanmastracci 8 лет назад

+Isreal Diaz Glad you found it useful :)

@johnbaner3423 7 лет назад

i missed the part where you demonstrate that Airbag honestly the $1000 Airbag instructions are what we need to see you demonstrate

@MiguelRPD 7 лет назад

Will my Camry go faster if I follow this videos instructions ?

@shredforceone 7 лет назад

Miguel Angel Medina Rise sorry, this only works with Hondas

@esmegutierrez8374 7 лет назад

A7XinAfterlife unless he paints it black than it's an instant 15 hp

@blackghost1231 7 лет назад

Absolutely, each piece you paint you gain 5+ Horse Power.

@ssingh6197 7 лет назад

Clear coat adds an extra 50 HP but be careful, you may blow out your engine.

@SmO4E 7 лет назад

hahahaha you made my day

@DUDEBAACKE 9 лет назад

Hey bro you think you can do a full review/update of your car, you seriously have one of the nicest accords!

@milanmastracci 9 лет назад

DUDEBAACKE Yeah sure thing!! :)

@milanmastracci 9 лет назад

DUDEBAACKE ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7yE8JSD_pFc.html

@kevinm1728 6 лет назад

Looks great. Gives it a splash a color, but you didn't over do it. Well done.

@ML6103 4 года назад

So satisfying when you take it all back with the sanding and cleaning. Almost didn’t want you to prime it

@TheOnlyToblin 8 лет назад

What do you recommend for painting interior panels that have a surface texture to them?

@sebastianrangel8885 2 года назад

Vinyl spray paint

@CarAudioInc 8 лет назад

It's so funny how when you think "oh I'll just paint it"... $300 later.

@spoderman2886 7 лет назад

+Abaddon Guecubu lmao and u put up with it

@alexanderdinges2739 7 лет назад

thornygravy

@alexanderdinges2739 7 лет назад

thornygravy

@alexanderdinges2739 7 лет назад

thornygravy

@jfresh2054 7 лет назад

thornygravy more like 20 bucks

@briguy3940 3 года назад

It looks really professional and from the factory. If I were to attempt this, removing the trim first would be a no go. I'd tape everything up really good, and spray inside the vehicle. Before anyone says how dumb that is, I never said it was a good idea, it's just how I would do it. 🤪

@masonpugh3637 2 года назад

Out of 30 videos this one is the best great job buddy

@diegomartinez4451 7 лет назад

Hey just a tip, don't put the clean pieces in the same spot you sanded them, because they can have dust and ruin the paint later. So, sand them, clean them, and then put them on another diferent surface.

@clascickles 7 лет назад

I have no plans on doing this. It came up in recommendations i got interested but after all that, theres no way i would ever do this lol. But great vid, im lost as to why put all the clear coat on just to sand it off but hey whatever floats your boat bro.

@milanmastracci 7 лет назад

It is to make the panels 100% shiny and remove the orange peel that was created when spraying the panels.

@jfresh2054 7 лет назад

Phly if you know anything about detailing, you would have known that. do you know what orange peel is? sanding levels out the peel, then to restore the shine, you buff it out

@clascickles 7 лет назад

Josh H i know nothing of that and he already answerex my question. thanks for your input.... 😐

@aaadeejay 6 лет назад

By far the best video I've seen on this topic, excellent job and thank you for this.

@enzo665 2 года назад

This saved me over $700, thank you 🙏🏾

@ryanperez5417 9 лет назад

Thanks for the reply. Can you do a diy on how to perfectly wrap the interior handle please? It would be appreciated!

@markcullen2870 3 года назад

Hey man Ik this is 5 years later but did you ever figure out how to take the door panels off lol

@christianrodriguez7478 8 лет назад

Nice video straight to the point. I've being planning doing this to my '11 Lancer.

@Couchpotato550 8 лет назад

I've got a 1987 Fifth Avenue and am looking to paint the "wood" trim I think this video is really helpful

@johnargue2977 8 лет назад

Spray ,dry, spray,dry,Spray ,dry, spray,dry,Spray ,dry, spray,dry,Spray ,dry, spray,dry. After 52 coats of a dozen cans. Go the extra 10 % and wet sand. :)

@mattarnold198 4 года назад

Mr Meguiar say: "Wax on, wax off" - never forget this important lesson!

@pasitalredy90 8 лет назад

do a video on how to build a rocket please

@retiredlivingthedream 3 года назад

Great video, thank you! My favorite part . . . demonstrates disclaimer regarding breathing apparatus to protect from lawsuits, then zooms camera in to get head out of the shot and paints without wearing breathing apparatus. :-)

@ericlugo1597 Месяц назад

How are you doing, brother? I appreciate the work you did on your panels. I just purchased a new truck for My Wife and I intend to do some of the interior the same way in red even though I had a busy idea of how to do things you sealed the deal for me thanks again.

@tegular1 8 лет назад

Great video. You forgot to put your respirator mask.

@jmhernandez6503 6 лет назад

Tom Dolic Safety first!

@josephro6367 9 лет назад

Great video dude! You shot it very well and good job on the pj!

@cameronhill8279 7 лет назад

I was a bit surprised by how well you explained this stuff. You earned my sub.

@milanmastracci 7 лет назад

Thanks Cameron :)

@adnaanpardawala 6 лет назад

Wow. Red looks excellent. Never thought this could be done. Will definitely try it in future.

@mlivesay88 7 лет назад

says to wear a mask... DOESN'T WEAR THE MASK.

@christophermcdonough3466 5 лет назад

Wahahahahaha

@subadanus6310 5 лет назад

"do as i say not as i do"

@davepelfrey3958 5 лет назад

Maybe wanted to catch a small buzz. Just sayn! LOL

@toddyboy563 4 года назад

Coronavirus in a nutshell

@markcullen2870 3 года назад

This aged well

@wipi-dn2jf 8 лет назад

that's actually not the way to spray paint, you are suppose to spray in one go from edge to edge, not part by part and stop in the middle of the panel, it will look uneven.

@joelscb 8 лет назад

@derrickperry1657 8 лет назад

thank you lol was thinking the same thing

@bryanhodgin1329 6 лет назад

And he was too close to the object he was spray painting

@bris9984 6 лет назад

Your mom is uneven

@DarthCorvus 6 лет назад

I agree. I mean I'm not trying to give the man hell. He still managed to produce an excellent looking piece in the end, but I was cringing watching his spray pattern. All the same to each their own lol. Great looking piece.

@Santino520 3 года назад

Great work! Thank you! At first I thought this was Chester Bennington.

@randrose3177 6 лет назад

Great vid, let me just make a couple of suggestions. If your plastic trim piece is flat it is ok to sand however if you have a textured piece like out of a fox body mustang don't sand it; you will ruin the texture. Also, when you de-grease your piece prepping for paint preparation consider wearing gloves to protect your hands and the piece from the oils in your hand that you are prepping.

@user-xy2jh1zs9j 6 лет назад

"Without spending a dime at a shop"

@nomadMik 4 года назад

In US English, 'shop' means a workshop like an automotive place, not shops for shopping, as in standard English. So while you won't have to pay anyone to do the work in a 'shop', you will need to spend a couple of hundred dollars at a 'store'.

@nomadMik 4 года назад

@hermes trismegistus It apparently wasn't obvious to 2T, which is fair enough… it's startling what a media bubble the US is in. I've lived here for over 20 years, and I'm still find things most people don't realise are unique to the US.

@chewynoodles409 5 лет назад

This guy hit puberty like 30 seconds in

@MrLahey27 8 лет назад

This is my son in the pic but I must say you are absolutely 'gorgeous'! You could and should model my friend.

@archNagel 9 лет назад

This is awesome. I painted my car's center console but it got scratches really easily. You did a great job with the clear coat and polishing. I will be redoing my center console with your method. Thanks a lot for the video. I subscribed!

@milanmastracci 9 лет назад

Angel Rivera Glad to hear!! Take your time and don't rush it, thats all I can say :)

@bridger911 8 лет назад

Without having to spend a dime? Except on supplies 😂

@Neobaneo 6 лет назад

right? The polisher alone is 100$

@badabingbobaloo7245 8 лет назад

put your resporator on practice what you preach

@bobdoleeatspoop 8 лет назад

Just bought a 2010 accord coupe LX-s as my "first" (first car was inherited) car and it's been only 2 days and I can't stop driving it I love it and I really want to do this with my trim but mines the sport blue that Honda uses

@JesusGonzalez-mj5fn 3 года назад

It’s funny that I was looking for a general instructional paint video and it turns out that this is the same exact car I have, better for me 👌🏼

@milanmastracci 3 года назад

That's awesome! Couldn't have been a better suited video lol

@bucketcentral8311 8 лет назад

why are you using 2 primers? 1 is enough :P and you really didnt need that many coats of primer, its not a sandblasted car so 2 layers of primer would be enough. and also sand down the primer with a really fine wet sandpaper before spraying your collor :) and also dont do those small back and forth motions, do complete crossings over the whole peace, better results that way

@jasonwade3933 8 лет назад

All he had to do was wet sand , the lacquer that he put on, he did not have to go all the way back to the silver, he had an existing red match all ready , all he had to do was Sand back some of the locker with wet paper and then go right over with the better lacquer that he, wanted totally made a meal of it , and not everybody has the money to be paid for more primer more red paint and so forth! Or he could have triad tried to buff it up with the compound in the first place he might of got the result That he Wanted ?

@imthatguyhere 7 лет назад

Jason Wade I think the redoing of red was more to show how to do it, not to refinish it.

@xanderc4732 8 лет назад

should change description to "how to paint your honda interior"

@neilbrislawn1963 8 лет назад

just a friendly suggestion when your painting dont just spray a half of it. you need to do long sweeping sprays and that will prevent any imperfections aswell as sanding by hand is a huge part. using a grinder even with the pad can still cause flat spots. Looks awesome though! nice vid

@EliasHernandez-ov2jz 10 месяцев назад

Bro, you just helped me with everything I was looking for. Thank you, I am subscribed.

@DiamondFlossin1 8 лет назад

can I just pay u to do mine? 😕

@milanmastracci 8 лет назад

+Manny Ya Bish If you want :) Send me an email at milanmastracci@gmail.com

@DiamondFlossin1 8 лет назад

+milanmastracci done!

@DiamondFlossin1 8 лет назад

+i2Hot4Tv he would've if I sent the parts

@Cyrus_95 8 лет назад

+milanmastracci Still have the same email? Might shoot you an email and get an estimate on mine if you still are doing trim pieces for people

@milanmastracci 8 лет назад

Hit me up Cyrus!!

@hermonbasil9263 8 лет назад

don't u think its actually easier to get your interior wrapped in any choice of your color rather than go through this awful thing?? not a hater ..love the mods you doing to your car ..but ...wrapping is easier yeah ?

@codeyhanna767 8 лет назад

Also painted the trim on steering wheel by tapping everything up. Couldn't get the trim off steering wheel. Worked out great.

@mickholgate3347 8 лет назад

Great vid and results using pressure packs, the only thing you forgot was plastic primer/adhesion promoter.

@matthewwarwick5416 6 лет назад

very clear and structured, no BS. Gives me the confidence to try mine. I want to put pin stripe or decal on mine as well. Any suggestions on technique, I'm thinking decal then clear coat. Even better if you could suggest a product to print my own image, I've been looking for a printable clear transfer type product, but still yet to find anything.

@mugen-r4084 6 лет назад

These types of videos make it look very simple knowing full well when you actually try it you will fuck it up! But good video straight to point no fannying about, clear instructions , detail info on products etc

@dailyshoey8982 8 лет назад

Next time I paint something that I want shiny and done Properly , I will be deff doing these steps , You took your time , you thought everything out . I used to just Prime and Paint and waited 1 day , turned out crappy , Thanks milanmastracci !

@milanmastracci 8 лет назад

+Just Cause Tube No problem man!! Glad you found the video helpful

@craigjohnston556 3 года назад

Turned out great, but i like how you set the cleaned piece down on the table you just sanded over.

@Worgverine 8 лет назад

Great vid, Painting a truck but all the info just as useful (except how to remove the parts lol)

@ThePatrickBateman69 8 лет назад

damn dude. the primer and filler sprayed and had such great coverage. that VHT paint has the worst spray tip pattern causing you to be hesitant when you applied the first coat. great video as always.

@shivamsingh-si1uq 6 лет назад

Looking......,

@TroubleMakerVlogs 4 года назад

Most informative video I've ever seen in my life , you my friend are a godsend ✌️👌

@milanmastracci 4 года назад

Glad to help! Thanks

@theonewheelednavy3854 5 лет назад

I would always recommend to put your spray cans in warm water for a couple minutes before using them especially when using plastidip. This makes the paint come out of the can way more evenly.

@infury496 7 лет назад

Mate if you keep going like that you will very far. Well done!

@gsprof9788 6 лет назад

Did a good job explaining, but several suggestions having restored car interiors for over 40 yrs. One wear gloves, you don't want to get the body oils or anything else from your fingers on your cleaned surface. Otherwise you can have fish eyes and adhesion/finish issues. Start with washing and drying with mild dishwashing soap. then clean with wax/grease remover or similiar product. You then clean with isoprophol alcohol and 3M scotchbright blue pad to prep clean/surface of any remaining crap. Last after cleaning you really should use an adhesion promoter for hard plastics, it chemically and at a molecular level preps the plastic to accept the paint for better adhesion. If doing a textured surface. Also if your just re-coating or part is molded in the same color and using the same color you can skip the primer coat or just lightly fog a primer coat on. Same with the color coat thin coat to cover primer and give correct color to part otherwise you'll loose the original grainy texture and it'll look painted

@vvalasek 2 года назад

Great video - I’m at the point where there are a few interior pieces I’m looking to refinish / nice work

@darcelps 8 лет назад

I just did this to my 07 si and it looks amazing!! Thanks!!

@milanmastracci 8 лет назад

+Dj No problem buddy!! :) Glad it turned out nice

@HowToKnowLife 9 лет назад

DUDE You are awesome! your videos are a really great help with simple DIY projects!

@milanmastracci 9 лет назад

Aaron Enerio Thanks man!! I appreciate all the support I can get :)

@vau5114 5 лет назад

Very detailed explanation. Unlike any other. Good job man

@stevenwood811 8 лет назад

Gotta say, your video hit every point. Excellent video, thanks.

@r_s1776 4 года назад

Your video is very helpful. Thanks.......I have to redo mine. I used rustoleum paint and the spray nozzle was terrible.

@envyduzit 8 лет назад

Awesome job man. You took your time to do it right. Props bud

@danielteniza161 6 лет назад

that's a professional work. congratulations

@hidconceptcom 6 лет назад

Very precise explanation. Not sure if I can do as good as you demonstrated though.

@r_s1776 4 года назад

If I'm going to wet sand by hand what grit sand paper should I use? 2000?

@JasonThornhillPC 3 года назад

Excellent description and quality job.

@eddyduncan2385 7 лет назад

Very thorough most guys just clean and spray

@jeffcarroll4219 7 лет назад

That car used in the double clutch video sounds good, man! Beautiful sound

@mjg878 7 лет назад

that looks so professional bro well done

@JonathanThompson1320 4 года назад

Really enjoyed the product shot and recap explanation at the end. Thank you!

@reviews2628 7 лет назад

Amazing video, very helpful. Can you also upload how you actually tool out parts of interior?

@myreviews4905 8 лет назад

Good job bud! I need to reupholster my whole door panel. It has vinyl and leather. Have you repainted the whole door panel instead of reupholstering it? Same with the headliner, it would be nice if you can do a video on removing the old material, sand, paint, etc.