Тёмный

How to polish a steer wheel on a semi - Evan's detailing and polishing in depth 

Evan Steger
Подписаться 39 тыс.
Просмотров 102 тыс.
50% 1

How to polish a steer wheel on a semi - Evan's detailing and polishing in depth
Evan of Evan's detailing and polishing in Chilton, Wisconsin goes in depth on one of his more popular how to videos. My technique and pattern has changed a little over the years. If you watched the old video from 10 years ago and liked it then you will love this video. Yes it is a lot of talking but this video dives in depth on exactly how and why I do what I do. Watch all the way to the end and see in real time how I polish a steer wheel in 3 minutes and 30 seconds. Full cut and color in 3 and a half minutes.
All of the products used in this video are available on goshineon.com/shop
All of these products use in this video are available at www.amazon.com/shop/metalpoli... or by the individual links.
Makita ga7021 amzn.to/2RPDBoo
6,000 rpm
Dewalt D28499X amzn.to/2JZqw9j
6,000 rpm
Makita 9927c amzn.to/2TaKL8n
3500 rpm variable speed
Dewalt dwp849x amzn.to/2qIZ7j9
3500 rpm variable speed
Green electric pressure washer. amzn.to/2JAeJz9

White cotton towel options
12 x 14 (100 pack) amzn.to/2SHAm3r
12x 12 (24 pack) amzn.to/2C5evLU


Makita 5" da or random orbit
hook and loop amzn.to/2SxCY3r
15 mm orbital amzn.to/2VWSM2l
Porter Cable. amzn.to/31saU5d

Extension cords
100' 10 gauge amzn.to/2Sqclko
50' 10 gauge tri tap amzn.to/2t6PHPJ
100' 12 ga amzn.to/2GgOFJJ
50' 12 ga amzn.to/2TA5nXs
20 ton jack. amzn.to/3343V4i
20 ton air jack. amzn.to/2qSNTvJ
20 ton stubby jack for low axles. amzn.to/2PzRc5e
20 ton stubby air jack for low axles. amzn.to/2JA9ShK
Under new law I have to proclaim these links are associate links and I get paid for the sales of these products.

Хобби

Опубликовано:

 

12 фев 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 348   
@BOBANDERSON5150
@BOBANDERSON5150 4 года назад
Coming from a Truck Driver. By Far the Best DIY Polishing video on rig rims. You make it look too easy! Keep up the AWESOME VIDEOS!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thank you. Truly appreciate that. Means a lot.
@fueloutlaw6870
@fueloutlaw6870 4 года назад
This guy makes it so much easier to understand and such good Videos explains the whole process so much better than DC supershine.. Evan is by far better and the best!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad to help! I don't think I'm the best by any sense of the term. But I do truly appreciate it.
@tlspiker5341
@tlspiker5341 2 года назад
I understand so much more now about polishing metals. Have been around crome polishing in the past.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Thanks for watching.
@MNpicker
@MNpicker 4 года назад
Awesome vid man!! I'm gonna watch it again.. These videos are really helping me out!!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad to help.
@anotherdayanotherdollar.c4006
@anotherdayanotherdollar.c4006 3 года назад
Awesome. Your videos have taught me more than I thought I’d ever learn. Thank you!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Glad to hear it, it truly makes me happy to know that they are helpful. Thank you.
@davariomoon190
@davariomoon190 4 года назад
love the finish look. I'm glad ur updated alot of ur videos. keep up the good work.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
More updates coming soon. Thank you for watching. I will try to continue updating old videos.
@DavidPaulGatineau
@DavidPaulGatineau 2 года назад
Been binge watching your videos. Absolutely loving what you do.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Glad you like them and I appreciate you taking the time to watch them. Thanks for commenting too!
@nickkirkham1363
@nickkirkham1363 4 года назад
Nothing but the best as always! Keep up the great work buddy!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thanks for watching.
@krzysztofslomiany4090
@krzysztofslomiany4090 3 года назад
i like the nuggets at the end of the videos. good little idea and usually good info. keep up the good work.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Glad you like them! I will surely try. Thank you.
@pernellrockar2223
@pernellrockar2223 4 года назад
Great video Evan! Keep up the great work.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad you like it.
@TheBostonTrucker
@TheBostonTrucker 4 года назад
Absolutely awesome! Fantastic and informative video!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Appreciate that. Thanks for watching and supporting.
@uziel114able
@uziel114able 3 года назад
Amazing bro I’m just starting to polish semi truck wheels and I’m learning fast watching your videos helps a lot !!!!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Glad to hear it and glad to help. thanks for watching and supporting the channel.
@kaihaole80
@kaihaole80 4 года назад
Evan u da man! Straight up and honest... love da vids
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Appreciate that. Thanks for watching.
@sc-dx9bc
@sc-dx9bc 4 года назад
Thanks for doing these videos! I am going to attempt to buff a aluminum dump bed on a dump truck. This will be no small task but from watching your videos I have learned a lot.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Dump beds are definitely something I tell beginners to stay away from. Takes years to develop proper buff control and pressure to accomplish.
@drmikeyb1
@drmikeyb1 Год назад
I realize you've been doing this a long time but you make it look so easy and the outcome is amazing. Awesome job Evan.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you! It does get easier with time but there are always some challenges. I appreciate your support.
@davidlomas4015
@davidlomas4015 Год назад
Always enjoy your, videos, thank you for sharing!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you for watching! I appreciate you taking time to comment.
@Trucklifelu77
@Trucklifelu77 2 года назад
Absolutely love these videos
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
More to come!
@Shaw412
@Shaw412 3 года назад
You definitely make it look easy! I hope I'll get on the same level as you one day lol, a confidence booster watching this for sure 🤙🏻
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Im nothing special. Anyone can do what I do. I've had 20 years of daily practice.
@TuPapiZul
@TuPapiZul 4 года назад
Just polished my first wheel today! Hopefully one day I can be like you goat
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Practice all the time and you’ll kill it.
@russellatwell2000
@russellatwell2000 4 года назад
Great video,super fast and i like how you control the grinder.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thank you. Much appreciated. 20 years of work to get here.
@raybendle9522
@raybendle9522 4 года назад
Awesome work. Wish we lived closer you would be seeing our coach twice a year. Takes me hours with a mother’s power ball and drill and nowhere close looking like yours!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Appreciate that. You are welcome anytime.
@shawngraham2946
@shawngraham2946 4 года назад
Great job as usual!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thank you for watching. Much appreciated.
@mtccorp
@mtccorp Год назад
Hard work is always impressive Bruh!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thanks, appreciate it!
@Boyleheights13
@Boyleheights13 Год назад
IM GLAD I FOUND YOU I BOUGHT ALL MY GEAR YOU HAVE TO DO NY OWN 1ST TIME POLISH..THANK YOU BROTHER.ONCE AGAIN ILL KEEP YOU POSTED HOW I DO.🥴
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You're welcome! I'm happy you found the videos and are using them along with our products to polish.
@jacob2483
@jacob2483 2 года назад
Thanks Evan! I’m trying dress my truck up a little and love these videos!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You're welcome!
@jacob2483
@jacob2483 Год назад
@@EvanStegerMetalPolishing if I wasn’t so far I’d bring my truck over, but I still buy your products and they are great!
@fabrisiorivera6129
@fabrisiorivera6129 2 года назад
Another great video man
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Thank you. Truly appreciate that.
@darrendeal3103
@darrendeal3103 Год назад
Evan great videos maté explaining it in simple terms I do all my own polishing your tips make my job easier especially the sanding up to 600 grit 👌🏻thanks bud 👍🏻
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you. I am happy you have found this helpful. I appreciate you watching and taking time to comment.
@pilos6
@pilos6 2 года назад
Every Single Word That Comes out of his Mouth, is pure Excellence Tutorial......Super Chingon Amigo, You teach me so much with your vides. Thanks
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
I am truly thankful for your support. It means a lot. I am happy you find my videos helpful.
@muddjim55
@muddjim55 2 года назад
Awesome tutorial, thanks from Britsh Columbia, Canada 🇨🇦
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You’re welcome, thank you for watching.
@gustavomendoza6028
@gustavomendoza6028 2 года назад
Your video helped so much ..I did my dads truck today and saved him a lot of money .. unfortunately I had to sand but over all pretty easy work with great results
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Love hearing this. Thanks for watching. Keep shining.
@troykunshier2385
@troykunshier2385 4 года назад
Great job Evan, truly enjoy seeing your year's of experience. Like to see you do a Pete grill on the truck!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Coming soon! Thanks for watching.
@mommasaid7543
@mommasaid7543 2 года назад
A true professional!!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you.
@larrykirk1760
@larrykirk1760 2 года назад
Awesome work
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you. I appreciate you watching and commenting.
@Jreddygo
@Jreddygo Год назад
Dude I’m glad I ran into your channel., well I was watching berry trucking paint that purple truck and I found you through them. But thanks for your info and for being a hard charger..! Cheers from houston tx 😎👍🏽
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
That's a Beautiful truck. Thanks you for watching and supporting my channel
@ciaranbrennan16
@ciaranbrennan16 Год назад
Great video!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Glad you enjoyed it
@svenskavapes8558
@svenskavapes8558 8 месяцев назад
Great video, wondering of stratig this over here in Sweden. Thaks for a great video ❤
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 8 месяцев назад
Thank you for watching!
@tonebalone9203
@tonebalone9203 3 года назад
Great video
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Glad you enjoyed it
@erastusnjoki2404
@erastusnjoki2404 6 месяцев назад
Great video and free valuable content
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 6 месяцев назад
I appreciate that!
@johneisler4242
@johneisler4242 4 года назад
I have been wanting to learn metal polishing for a long time and the opportunity has recently fallen into place. I'm all fired up about meeting and learning everything I can from Evan. My truck will soon shine!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Soon as the shop slows down we will see you.
@johneisler4242
@johneisler4242 4 года назад
@@EvanStegerMetalPolishing Thank you.
@centralcal6604
@centralcal6604 2 года назад
great video can't wait to get to polishing my own wheels
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you. Hope this was helpful. Let us know!
@buffi944
@buffi944 3 года назад
great work
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Thank you. Much appreciated. Thanks for watching.
@ajlamboy971
@ajlamboy971 4 года назад
Perfect video
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thank you. Really glad you like it. Thank you for watching and taking the time to comment. Truly appreciate it.
@brianegan8050
@brianegan8050 3 месяца назад
Great job
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 месяца назад
Thank you
@richardpowell7013
@richardpowell7013 2 года назад
Evan you're ABSOLUTELY Amazing when it comes to polishing wheels! The steps you take to help subscribers is very thorough. I've watched several videos of yours and when started polishing wheels like you it's a walk in the park! Thanks for sharing this video and I'm viewing this from the 1st state of DELAWARE! Btw could I get one of those "GET YOUR SHINE ON" posters w the PETERBILT autographed?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
Sorry for the late response. I truly appreciate this comment and I am happy to hear the videos are helpful. Email melinda@goshineon.com and we can see if we can't get you something. Might not be the poster but we will see. Thanks for watching.
@LovinTruckin
@LovinTruckin Год назад
Great tips man . I bought some mothers and started hand polishing . Now I have to buy all kinds of stuff
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Good luck! You can do it.
@JeremyLindahl123
@JeremyLindahl123 3 года назад
You make it look way easier than it is. I'm taking the video and repeating the steps to try to get better. Having trouble around the hand holes. When you slow down around the holes are you just letting off the trigger? Thank you for all the time you put into helping others try to become successful polishers. We appreciate more than you will ever know.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
After 20 years of polishing everyday if I didn't make it look easy I'd be in trouble. LOL But yes I am feathering the trigger when I get around the hand holes. I am grateful to help out and give back to the polishing community. Thank you for watching the videos and for supporting the channel. Truly appreciate it.
@lastressabari5066
@lastressabari5066 4 месяца назад
the best video on RU-vid
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 месяца назад
Thank you.
@tywhitman7489
@tywhitman7489 Месяц назад
Great info thanks
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Месяц назад
You bet! Thanks for watching.
@diddybuilt8330
@diddybuilt8330 4 года назад
Another good one 👍🏾
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad you like it.
@AirdoutRacing
@AirdoutRacing 2 года назад
I think I've watched almost every video you have LOL. But think I've finally got it for polishing all the trim on my new enclosed race trailer. Going to get a 3500rpm ginder/polisher. Start with Orange and brown, then go to yellow and green. Maybe hand polish in-between. But if the shines not as good as i want, can add yellow and blown in the middle, then go to white and green. (Making sure I use a different yellow wheel LOL) I appreciate all the videos! Cant wait to get out and try it this weekend, will make a video on my results!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
Thanks Brotha, I appreciate you watching and commenting.
@carlosgarza6898
@carlosgarza6898 2 года назад
Awsome thanks for the video helps me alot!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you, happy you found this helpful. Check out my other videos for more information and helpful tips.
@dale9896
@dale9896 4 года назад
Great job thanks for that. Australia🇦🇺
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad you liked it.
@nateheiderscheit8337
@nateheiderscheit8337 4 года назад
Great video. You should do a video just like that but for the drives.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I have one here on my channel but I’m going to do an updated one.
@ikravtsov
@ikravtsov 4 года назад
Nice job 👍
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thank you.
@danrogers9122
@danrogers9122 4 года назад
Your the man!!!👍🏻🤙🏻
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Appreciate that. Thanks for watching
@jamesjessop9934
@jamesjessop9934 4 года назад
Hi love the videos I have learned a lot from them and really appreciate the help. I bought a full mask respirator from you a while back just like the one you always wear and seemed to have a problem with it fogging up. Was wondering if you had any pointers for me thanks.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Check the nose cup. If the nose cup isn't sitting just right it will fog up.
@salsero8816
@salsero8816 4 года назад
Wow that’s was fast 🔥🔥
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
WE are all about efficiency around here. Time is money and no one has ever offered to sell me time. LOL Thanks for watching.
@mikegivens3456
@mikegivens3456 4 года назад
Love every episode you've done. I have an old truck that hasn't seen or been polished in no telling when. Would love to do this myself to save time and money from going to shop. How clean does the wheels and tanks have to be before polishing? And how often can I polish to get these to look like new?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
The cleaner the better for polishing. You can polish as often as you want also.
@joegardenhire9653
@joegardenhire9653 3 года назад
Sure appreciate ur videos
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Glad you like them! Hope they are helping.
@rexllc603
@rexllc603 8 месяцев назад
Thank you
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 8 месяцев назад
Thank you for watching!
@cassiellightman
@cassiellightman Месяц назад
3:43 seconds one rim. Very good.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Месяц назад
Thank you!
@mojah1
@mojah1 3 года назад
Thanks for sharing
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
My pleasure, thank you for watching!
@sylvesterdiaz188
@sylvesterdiaz188 2 года назад
Nice man
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Thanks for the visit
@robertcline9170
@robertcline9170 2 года назад
Great video sure learned a lot used to do mine by hand but getting older need something easier when do u have to sand first n how fine a paper should I use keep up the great work
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
I say the first grit gets it smooth. The rest of the grits make it polishable. No perfect answer as every wheel is different. But try 400. If it’s not deep enough go deeper until you find the right grit then work back up to 600 to make it polishable.
@exn01
@exn01 3 месяца назад
You are the best. question make any difference if I wash rims Whit acid before polish? Neri's mobile car truck wash from California
@michaelcrowhorse-chavez6582
He does My Question What Polish what Grade is his Pad and what speed ? Great Vidio !
@roberttrigg7117
@roberttrigg7117 4 года назад
When will the new green compound be available to buy on your website or is it available now? Awesome and very helpful videos you do👍🏻
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Hoping real soon.
@sspp3065
@sspp3065 2 года назад
Damn those things look good
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you!
@TripleGAutoDetailing
@TripleGAutoDetailing Год назад
Epic 👏
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
Thank you
@jimalton7100
@jimalton7100 11 месяцев назад
Very educational! I am seriously considering getting into doing wheels .at this point I’m just an idiot.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
Follow along with the videos. It is not going to be perfect in the beginning but with time it will get better. Best of luck! Thanks for watching.
@brianclark7523
@brianclark7523 3 года назад
Great work Evan- two questions tho. What RPM are you running the grinder at for this and do you ever wind up using a rake at all? Sometimes it seems like I might be getting too much buildup and it gets streaky when I try to color. Thanks in advance for any advice/help!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
In this video I am spinning 6,000 rpm. I don't rake my cut buff but I don't over compound it either. I only rake my color buffs. Hope this helps. Thanks for watching and supporting.
@noladronelife_6574
@noladronelife_6574 2 года назад
Hi Evan i just purchased the makita 7021.That’s a 6600rpm grinder I noticed that the buffing wheels that I’ve come across are only rated for 3200-3400 depending on the manufacturer.Are you using buffing wheels that are rated for a higher speed if so where can I find them?
@odairtaveira5675
@odairtaveira5675 4 года назад
Nice video thank you! How can we remove a superficial scratches ? Do you have any recommendation? Whit the experience you have? If you can respond I will appreciate!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Stepping down buffs softer and softer. Some people use hand polish on an orbital to clear those up as well.
@scottbennington2936
@scottbennington2936 4 года назад
That's not my 3000 rpm variable rpm Makita polisher... I enjoy your willingness to show your technique. I am helping my dad next week polish up his 1999 T2000 with 1.3 million miles. Hope I get in the ball park. Beautiful work.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
You can. Just take your time and you got this.
@keenankelley187
@keenankelley187 4 года назад
Awesome
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Thank you for watching.
@robertsalazar5165
@robertsalazar5165 Месяц назад
Where do I get polish wheels and rubbing polish? Dude you work fast and amazing.love your work
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Месяц назад
www.goshineon.com
@W210POV
@W210POV 3 года назад
Hey Evan. I learning much useful things by watching your videos, thanks for that! But I have a problem that I can't understand. When I polishing rims I can't reach a deep mirror effect, it looks foggy. Starting with paint remover, sanding till 800 and then 3 steps of polishing. Any advice how to reach a deep mirror? Thanks!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
If you can send me pictures to my cell phone at 9209790386 of what this fog looks like I can try to help diagnose what the issue is. Without seeing it it would be hard to tell what the issue is. Looking forward to hearing from you. Thanks for watching my videos and subscribing to the channel. Really appreciate it.
@nickjones8702
@nickjones8702 4 года назад
Great work lovin it trying to do the same thing here in Maryland. Just need a weekend to get the wheels and tanks done. What do you suggest for “Alcoa Level One” wheels?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Same as what you just watched in this video. Alcoa lvl 1 is same thing.
@nickjones8702
@nickjones8702 4 года назад
Evan Steger thank you sir.
@vernon207
@vernon207 3 года назад
That’s cool buddy
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you
@franklinvaughn1595
@franklinvaughn1595 4 месяца назад
I've been using a yellow buff to cut so do I need to use a orange buff to cut.Also I've been using a green bar to color so do I have it backwards.And what rpm do I n need to use for my grinder
@user-ho3bc7di8h
@user-ho3bc7di8h 10 месяцев назад
Nice
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 10 месяцев назад
Thank you!
@kamaulipscomb64
@kamaulipscomb64 8 месяцев назад
Nice! Can you share exactly what wheels and polish you are using
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 8 месяцев назад
Yes I can. goshineon.com 2 step aluminum kit and add the 40 ply flannel with extension.
@grapestreetcrip6124
@grapestreetcrip6124 4 года назад
Sick job..my wheels are in good condition..can I use only green?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Always cut before color.
@emergekuyguy291
@emergekuyguy291 6 месяцев назад
hey evan polished my first wheel today definitely need some practice but i have a question. Why am i leaving lots of black residue after i polish i think i was using too much compound but not sure
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 5 месяцев назад
Very loaded question. Could be too much rouge. Or too little rouge.Or too hot in the room. Or too cold in the room. Or too much pitting causing the rouge to burn into the pits and pull out of the buff. Would be very difficult to know without seeing what you are working on and how you are polishing it. I am sorry I can't be more help on this issue without those parameters.
@beachtransport9768
@beachtransport9768 4 года назад
If I use a red buff first with brown is that going to have better cutting results? Then follow with the normal steps orange/brown yellow/green
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
It can on rough stuff but on nicer stuff going too aggressive can make more work.
@gordonjones446
@gordonjones446 2 года назад
How about polishing exhaust stacks ? What would you use on them ? Thanks
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Just chrome hand polish. Chrome plating is just a plating. Machine buff it and you’ll strip the chrome. Ruins it.
@chrigdichein
@chrigdichein 10 месяцев назад
Hoped to find your buffing wheels and compound bars in your shop or on Amazon…. the Makita is also not available
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 10 месяцев назад
Buffs and wheels can be found on our site at www.goshineon.com
@robertriggs4372
@robertriggs4372 2 года назад
Awsome
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you for watching!
@cluhman74
@cluhman74 Год назад
What RPM should I use with this two step technique? Orange/brown, yellow/green on a working semi. 10 wheels and 2 tanks. Great vids! New sub!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
I run at 6000 RPM
@leegodfrey3490
@leegodfrey3490 3 года назад
Awesome job. My question is once finished polishing what kind of towel do you use to wipe it down
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Once I cut and color I don't touch it with anything as anything you touch it with while it is warm and soft it will scratch. I don't wanna scratch what I am doing. If I have to remove some light compound then I will use a little whiting powder and a cotton Terry towel on aluminum or microfiber on stainless.
@leegodfrey3490
@leegodfrey3490 Год назад
Thanks
@coltonkruse2313
@coltonkruse2313 Год назад
Hey Evan do you put any like ceramic coating or anything on the rims when you are done? Not sure if that helps them stay polished longer or nah ?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
I don't. When you have a good quality compound it is not needed.
@tjcoovert7104
@tjcoovert7104 9 месяцев назад
I recently just started buffing and polishing for my new job. And every time I try to buff a wheel, I get rouge everywhere. How do I know when to put more on the wheel, how do I know how much pressure to apply, and how do I keep from getting the rouge everywhere?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 8 месяцев назад
Sounds to me like the items may be too rough to just polish and may require sanding. I am not sure without seeing it. But When to apply and how much to apply is the beauty of the art. There really isn't a set amount or a right answer to that question. I have a few videos explaining that here on my channel but there isn't a good answer.
@Soldier1287
@Soldier1287 4 месяца назад
No cleanup between compounds so there’s no-cross contamination? I also want to seal the shiny. Clearcoat or some kind of coating
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 месяца назад
If you use compounds that work well with each other there is no cross contamination. Clear coat on aluminum is a bad idea. Aluminum is like a sponge and it needs to breathe. If you coat it it will off gas underneath and leave it foggy/hazy. Rouge has the best sealant in it. A simple quality hand polish like time2shine aluminum polish will maintain the shine easily and for a long time.
@fierro0516
@fierro0516 4 года назад
how do you polish/cut the holes on the wheel? just hand sand and polish? Whats the best way you have found to work
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
That is the best way. You can also use goblets and compound. We sell polishing balls and such on goshineon.com/shop
@fierro0516
@fierro0516 4 года назад
@@EvanStegerMetalPolishing thank you Evan. i use a mothers power ball mini and cone once i hand sand. Seriously thank you for the reply keep up the killer work been watching all your videos since the begining
@bebeti9408
@bebeti9408 4 года назад
Question Evan Do you use a 10" wheel or 8" wheel on your grinder? I tend to use the 10" wheel on my 9" dewalt grinder but i made the mistake of puting a 10" on my 7" makita grinder that didnt go well Btw i use the exacte technic for the steers old guy taugh me when i first started i just crose cut it when i sand it , Thanks buddy Shine on!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I use all 9” buffs. It’s just a preference thing.
@OscarMartinez-fg8re
@OscarMartinez-fg8re 2 года назад
best regards, the second machine you used is the one with variable speeds, 3500 rpm
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
Thanks for commenting and watching the video.
@jadoty
@jadoty Год назад
How do deal with pieces with more nooks and crannies, where even an 8" airway buff won't reach? Just hand polishing, or are there other polishing tools that you use?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
We use hand polish. We do sell 2 and 3 inch barrel, cone and disk buffs. Also have 6in mini buffs. All depending on the area that you are polishing.
@gregorymarsh9504
@gregorymarsh9504 3 года назад
Evan, you've talked about how our eyes see the most clear, mirror-like finish when polishing is done vertically. How do you make a flat, horizontal surface look good at ALL angles (e.g. trailer fenders, trailer floors)?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
You gotta change angles for how it will be seen.
@gregorymarsh9504
@gregorymarsh9504 3 года назад
@@EvanStegerMetalPolishing I'm not sure I totally understand. Can you please elaborate further? If you were doing the top of a 2-wheel trailer fender (which would be viewed from the front, back, and side at any random moment) are you saying you pick one angle and go with it, OR do you mean you polish in 3 different directions until it's somehow uniform from all angles?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
@@gregorymarsh9504 I go in one angle but you need to blend in a few different angles on your cut. Work it multiple directions then finish in one direction. Usually from bottom to top. That is the best way I've found. Hope this helps as there is no other way to explain other than to show you. And I don't do them often so would take a long time before a video comes out. LOL
@gregorymarsh9504
@gregorymarsh9504 3 года назад
@@EvanStegerMetalPolishing Ok, I'll give that a try. Thank you for following up with me! Appreciated!
@josephsimon8694
@josephsimon8694 4 года назад
So I’m polishing semi rims and after I’m done I can still see cut and finish marks from the pattern I used with the buffer any idea on how to get that to go away?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Softer buffs with softer compounds and more time spent getting it hot. Eliminating hashmarks is what we all chase. Some can some can't
@nicholaschichura724
@nicholaschichura724 4 года назад
If only my buffs were that fast. Who makes that color compound??
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
We do. Goshineon.Com/shop
Далее
skibidi toilet zombie universe 34 ( New Virus)
03:35
Просмотров 1,8 млн
How to sand Aluminum?
21:26
Просмотров 171 тыс.
Which water gun won??
0:30
Просмотров 81 млн