Тёмный

How to polish a drive wheel mounted on a truck - In Depth Evan's Detailing and Polishing 

Evan Steger
Подписаться 40 тыс.
Просмотров 260 тыс.
50% 1

In this video Evan goes in depth on how to polish a drive wheel while mounted on a truck. If you are looking for a short and sweet just get down to it video we offer a shorter video on my channel. This is strictly a longer in depth version of that old video.
If you are looking for any of the products we use in the video check out goshineon.com/shop. All of the buffs, rouges, and liquids are available on the website.
All of these products use in this video are available at www.amazon.com... or by the individual links.
Makita ga7021 amzn.to/2RPDBoo
6,000 rpm
Dewalt D28499X amzn.to/2JZqw9j
6,000 rpm
Makita 9927c amzn.to/2TaKL8n
3500 rpm variable speed
Dewalt dwp849x amzn.to/2qIZ7j9
3500 rpm variable speed
Green electric pressure washer. amzn.to/2JAeJz9

White cotton towel options
12 x 14 (100 pack) amzn.to/2SHAm3r
12x 12 (24 pack) amzn.to/2C5evLU


Makita 5" da or random orbit
hook and loop amzn.to/2SxCY3r
15 mm orbital amzn.to/2VWSM2l
Porter Cable. amzn.to/31saU5d

Extension cords
100' 10 gauge amzn.to/2Sqclko
50' 10 gauge tri tap amzn.to/2t6PHPJ
100' 12 ga amzn.to/2GgOFJJ
50' 12 ga amzn.to/2TA5nXs
20 ton jack. amzn.to/3343V4i
20 ton air jack. amzn.to/2qSNTvJ
20 ton stubby jack for low axles. amzn.to/2PzRc5e
20 ton stubby air jack for low axles. amzn.to/2JA9ShK
Under new law I have to proclaim these links are associate links and I get paid for the sales of these products.

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 506   
@bearhaulin120
@bearhaulin120 3 месяца назад
I was thinking I was doing something wrong with how I keep catching on the holes in the wheel, but I see it really is just something that you can't do much about. Just keep going
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 месяца назад
Exactly. Thank you for watching.
@cbradiomizfit7562
@cbradiomizfit7562 3 года назад
The longer videos the better. You learn in the process
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
I am glad to help. Thanks for watching.
@stevebrown9862
@stevebrown9862 3 года назад
the water ring while on the truck i use a small grinder and use the pads that get smaller from polishing with large grinder . works great , good job Evan
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Great tip! Thanks for watching and supporting.
@elipete211
@elipete211 4 года назад
After the winter, I start to clean my wheels with SOS pads and soapy water, then sand the faces. And then I followed your process of polishing. It sure is harder than you make it look. It turns out pretty darn ok to me. Thanks for sharing your knowledge
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I used to do the same.
@hamburgerhoover208
@hamburgerhoover208 4 года назад
If you want to preserve your shine, furniture polish works amazing water just beads right off the shine really lasts long. You still have to do your maintenance hand polish every couple months or so at least I do.
@ronmetros6446
@ronmetros6446 2 года назад
After watching these video's, my wheels look much better then before !! Thanks !
@andrewsumner5388
@andrewsumner5388 4 года назад
Great job fellas! Very professional and consistent polishing thank you for the tips. I live in the northeast and the roads are pretty shit during the winter months.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
We try to be as professional as possible. Thank you for watching.
@jackwelborn1863
@jackwelborn1863 3 года назад
Great video brother i like how you expanded exactly what to do kept it short simple and straight to the point thank you sir you got yourself a new subscriber
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Glad to help. Some of my videos may seem long winded but they need to be sometimes to get the exact point across. Thanks for watching and subscribing.
@tombachar2565
@tombachar2565 2 года назад
You make it look easy great video!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Thanks for watching.
@krzysztofslomiany4090
@krzysztofslomiany4090 2 года назад
Evan is Tom Sawyer. Somehow tricked us into enjoying this hard dirty work haha
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Lmmfao. Yas.
@CruisingTheLand
@CruisingTheLand 4 года назад
Here is a fast way ✅ to Polish Aluminum wheels 👀: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mem_eVxI2_8.html
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
LOL I agree to disagree. But thank you for the great video.
@rceric9662
@rceric9662 4 года назад
I enjoy polishing my own truck. Definitely a sense of satisfaction but damn you sure do make it look easy lol. I know that it comes with time and technique. Thanks for posting 🤙🏼
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
It does. I've been polishing 20 years and I am grateful to have done it everyday. Thanks for watching.
@catalinacruz6361
@catalinacruz6361 3 года назад
Good job, more videos pls, thank you for sharing be safe out there
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
More to come! Thanks for watching and supporting.
@IRISH4486
@IRISH4486 3 года назад
Awesome job
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Thank you! Cheers!
@feur2884
@feur2884 4 года назад
Prefect explanation its all business thats it
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad you enjoyed it. Thanks for watching.
@custerfarmschippewavalleygrain
@custerfarmschippewavalleygrain 3 года назад
GOOD JOB EVAN AND TY
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Thanks bud.
@saywhatyeah3076
@saywhatyeah3076 Год назад
Always use an aluminum acid to clean the aluminum first it will make the polishing much easier!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
I highly disagree with that statement but to each their own. I personally find avid makes more work and does long term damage to the wheel. Most people don’t properly neutralize it before polishing and then the first moisture you hit it reactivates and starts eating at your shine. I’d rather sand than use acid.
@paulwesthoff9807
@paulwesthoff9807 4 года назад
Great video as always.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad you enjoyed it
@Rockfordfosgate3406
@Rockfordfosgate3406 2 года назад
Special thanks to the GOAT, for helping me learn how to polish on my W900. Thank you for your videos they are greatly appreciated!! Evan is the best out there no question about it
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
I’m far from the best. But thank you for the compliment. Truly means a lot. Thank you.
@carlosgarza6898
@carlosgarza6898 2 года назад
Thank you I've learned alot more from you than the guys that showed me how to polish!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Happy to help you out, thanks for watching.
@chloekauhi2594
@chloekauhi2594 4 года назад
You need to make another video without lifting the truck up. Lots of guys can’t do that and wants to see how a pro would do it. But as always, awesome work 🤙🏽
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Ok. I’ll do that. I hate doing them on the ground. It was the first tool I invested in. But I’ll make one.
@summershine_7702
@summershine_7702 4 года назад
Same! I bought a 20 ton low pro bottle Jack from harbor freight and a block of oak for a base (for soft terrain jobs) call me spoiled but I do everything I can to spin that wheel. Quality first is my goal. 🤙 good luck and shine on!
@jimbo7450
@jimbo7450 4 года назад
@@summershine_7702 I totally agree on the bottle Jack and wood as well. I've got crossfires on each drive and I hate messing with those.
@Desertpacrat92
@Desertpacrat92 4 года назад
This is a great jack manual and air www.amazon.com/Torin-Hydraulic-Bottle-Jack-Capacity/dp/B00026Z3HC/ref=sr_1_4?crid=3PQTYHDU8ATSJ&dchild=1&keywords=20+ton+bottle+jack&qid=1595115700&sprefix=20+t%2Caps%2C174&sr=8-4
@muddjim55
@muddjim55 2 года назад
Thanks , I just got a buffing wheel tonight for my Makita, I will have to go back and get a yellow one and some green compound. I got white and white . Newbie .
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you for watching and commenting.
@brandonhack1530
@brandonhack1530 4 месяца назад
This is a good one thank you
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 месяца назад
Thank you for watching!
@JasonTheMunicipalMechanic
@JasonTheMunicipalMechanic 2 года назад
I used to have to hand polish wheels on a truck I used to drive. It would take me 5 hours and my hands were like claws when I was done. I hated it.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
It’s definitely not for everyone. Thanks for watching.
@centralcal6604
@centralcal6604 2 года назад
Oh yeah it looks great thanks for the video
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You bet, thanks for watching.
@scotthooper5127
@scotthooper5127 4 года назад
Just wondering what you would do different if the rim was off the truck, and you need to get a respirator for Ty when he is next to you and the Makita. The dust you kicked up when you first hit the second rim while Ty was hand polishing was pretty thick. Just sayin'. I really enjoy your videos, Thank you for all your effort to make them.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
If the rim as off the truck I would lean it up against a wall and polish sections. I also have a jig that I use. And Ty has a respirator just chooses not to wear it. Can lead a horse to water but never force it to drink. Some horses will drown instead of drink.
@eastfingerboarder
@eastfingerboarder 4 года назад
Such a good video thank you
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad it was helpful!
@jaysmedia6410
@jaysmedia6410 Год назад
ok im barely getting into this… why not finish with the white wheel polisher ? instead of hand polishing ? just a doubt question
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You can. There are many ways to polish. But for me this way is quicker and less expensive. Helps me keep my cost down while keeping my profits livable. But to each their own. Some say that they get better results for less money than I do. That is why I say to each their own. You'll have to choose what works best for you. On most of my show trucks I do the same technique also.
@gremlin1396
@gremlin1396 4 года назад
I love how that dust cloud came to him and he turned and looked at it and went what the hell
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
He's a knucklehead for sure.
@cbradiomizfit7562
@cbradiomizfit7562 3 года назад
And then jesus said let there be light and there was light and he saw that it was good. And he was well pleased.
@GEO-vc1pc
@GEO-vc1pc 3 года назад
@@cbradiomizfit7562 🤫🤫
@cbradiomizfit7562
@cbradiomizfit7562 3 года назад
@@GEO-vc1pc Nope...
@hamburgerhoover208
@hamburgerhoover208 4 года назад
Doing the drives is a bear this is my 3rd season doing my own each time it gets faster and a little easier there is definitely a learning curve to this. It is NOT as easy as this guy makes it look he is definitely very experienced and professional.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Yeah I have been doing it 20 years this year and roughly 100,000 wheels under my belt. I have developed a pattern and a technique that works well for me. Thanks for watching and commenting.
@kelleyhunt.7214
@kelleyhunt.7214 3 года назад
@@EvanStegerMetalPolishing I'm not having any luck. All I can manage is to bring up a lot of black muck
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
@@kelleyhunt.7214 Not sure what you mean by black muck.
@repokid813
@repokid813 Год назад
Thank you
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You're welcome
@edpugh2997
@edpugh2997 11 месяцев назад
I love to see a positive bond between owners & employees. You guys are impressive 😊
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
Appreciate it. Thank you
@PawPaws_Place
@PawPaws_Place 2 года назад
So I could do this on my F350 leaving the wheels on and since I have chrome caps it should look great and I don’t have to fiddle with the lug nuts. Thanks. 🤙
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
If they are bare aluminum then yes you definitely could. I do pickup rims without removing all the time.
@lastressabari5066
@lastressabari5066 7 месяцев назад
Hello, thanks for your videos, how do you polish between the nuts?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 7 месяцев назад
I do it all by hand with a cotton Terry pad and Terry towel. If the wheel is rough I use luhmi and if it is nice I use time2shine aluminum polish. All of these items are available on goshineon.com
@gugaemarga8052
@gugaemarga8052 3 года назад
Iam from brasil nice videos
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you. Truly appreciate you watching.
@jerrykinnin7941
@jerrykinnin7941 Год назад
It's my intention to polish out my '16 Cascadia. 10 aluminum wheels a 120 gal fuel tank, near full deck plates, a 50 side saddle Hydrolic tank and a Diamond plate pickup tool box. And the aluminum steps problem is I'm in the muck of a steel mill 2 weeks out of the month.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You'll get it brotha. When the time is right you will get it.
@williecallen8518
@williecallen8518 2 года назад
Give your help a mask, when working beside you!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
He has one. All my guys have their own full face respirators. Some guys just refuse to use them. Can lead a horse to water but can't force them to drink. Shove their head in water and they will drown before drinking.
@kevincracolici7598
@kevincracolici7598 5 месяцев назад
Hey Evan Love the videos fantastic work you do, I do drive a semi 2024 cascadia and want to do the same thing to my wheels Will steer and drive however I had a quick question, I really don't want to invest in another grinder. I have a grinder at home, a Ryobi, the max level 11,000 RPMs and I know that's way too fast I also have a DeWalt corded drill that maxed out at 2500 RPMs. It's one of those better than the other and will the 2500 RPM drill be sufficient? Look forward to your response thanks man
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 месяца назад
Sadly neither one of those are sufficient.
@cjcarrier6675
@cjcarrier6675 2 года назад
Howdy Evan, CJ here from H-Town Texas. I am looking to get a side hustle going. My best friend and his Wifey do this for a living. They make a decent living. How much do you charge for each wheel? Would I be able to use cordless tool and if so, how many batteries would I need to swap out in order to do truck and trailer wheels? I would like to be able to go to customer if power was an issue and or driver is waiting to get loaded. Thanks great video, love the mid west accent..Don cha knoow..😆🥰
@jackjacobson6763
@jackjacobson6763 3 года назад
Hey Evan, enjoy watching your videos, super helpful and learn a lot. Could you make a video or give advice on how to safely jack up a truck to do what you’re doing in this video? I am looking to buy your polishing kit for the 4 fire trucks in my firehouse. We have bottle jacks available all the way up to 40 ton. Thanks again!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
That is one of our next videos. We are currently working on a video on how to properly jack a truck. Thanks for watching.
@isaelramos571
@isaelramos571 2 года назад
What does it mean when you see pores and fog after you cut and color? I sanded my battery cover from my dump truck with 400 then I cut and colored it with your brown and orange and green and yellow kit and my end result was fog and a lot of pores. The cut and color processes did achieve a mirror reflection though I'm just trying to figure out if I should have sanded with a 200 or 120 and worked my way up to 400? The pores were kind of deep as well. And I cut it about 5 times and polished 2
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
The smoother it is the clearer it is.
@ShainaReed30
@ShainaReed30 3 года назад
Love these in depth videos! Explain, show, explain while showing. Gold 👌🏼 So many things I’ve learned when I started polishing rims. Thanks Evan and your crew! Awesome videos especially showing different situations and how to approach them!!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Truly happy to know that these videos are helpful. I appreciate you supporting the channel and taking time to comment.
@troyporter8797
@troyporter8797 10 месяцев назад
I’m having a hard time leaving black streaks on the wheel just wondering what I’m doing wrong? Love the videos and appreciate any advice thanks
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 9 месяцев назад
What kind of black streaks. Send a picture of the black streaks to 9209790386 and I will do my best to get you headed in the right direction.
@h250riders
@h250riders 2 года назад
How much do you charge to polish a wheel? Man you make it look easy
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Anywhere from $25-85 per wheel. All depends on condition and the quality desired mixed with the amount of work needed to accomplish the job.
@waynedooley9397
@waynedooley9397 4 года назад
As always another great video answers questions and learned new way to polish correctly... thanks for all you do for us little guys... appreciate all you do thru your videos.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Our pleasure! Glad to help. Thank you for watching and commenting. Means a lot
@popcanfixit8862
@popcanfixit8862 4 года назад
Great job looks good. Just curious when are you going to do a video or have you done one and I missed it about polishing the inside holes inside of the rim?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I’m shooting it soon and I’ll get it edited.
@Jimbobd421
@Jimbobd421 4 года назад
I’ve been looking for a video for that as well.
@summershine_7702
@summershine_7702 4 года назад
Thanks for the video Evan, this explains a lot and will help going forward.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Glad it was helpful! I am glad to help anytime. Thanks for watching.
@brucebeasley1673
@brucebeasley1673 4 года назад
How you do fuel tanks
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
@@brucebeasley1673 We have a how to polish fuel tank video. Check it out.
@danielmonan2625
@danielmonan2625 Год назад
Great job boys.only thing you should both wear a mask and wear paint suits.they are cheaper than the laundry bill
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thank you for watching!
@jimalton7100
@jimalton7100 Год назад
As a beginner I really appreciate the more detailed videos 👍👍👍
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Happy to hear that you are finding these videos helpful! Thanks for watching.
@DynoDieselWagon
@DynoDieselWagon 3 года назад
Explain & Show what wheels and sticks ur using . NO Rake ?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
I do in other videos. I only rake my color buffs. We use only time2shine buffs and compounds from goshineon.com
@brandondunn8397
@brandondunn8397 5 месяцев назад
I just got a makita 9237c and buffing wheels. I couldnt even get mine in to get close to the lug nuts on the drive axles, i have 22.5 wheels. Too big of a polisher?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 месяца назад
I have used the 9237c and can get into the lug nuts no issues. It is the angle of the machine that makes the difference. Look at the angle at which I hold the machine. Really gotta shove the machine in there.
@brandondunn8397
@brandondunn8397 2 месяца назад
@@EvanStegerMetalPolishing Thank you for the reply. I will try to get it in there next time. That little rascal likes to pull away when it hits those holes in the wheels.
@richardcranium1136
@richardcranium1136 3 года назад
Free tip, been a tri-axle dump truck driver for a paving company for 30 yrs. So u can imagine how long it before any kind of love comes to our truck. new guys are proud, wanna make their truck, theirs. TIP; power wash wheel, soak with easy off, scrub with dish soap and a course 3m foam drywall sander block, rinse. done! 5 mins TOPS, per wheel, and tanks, 20 mins tops! hit again with finer grade sanding block and so on. just for guys without jacks, buffers and what not. Sick vid for in my own shop tho dude. Thumbs up from me guy!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Great info. Thanks for watching.
@taybrown3916
@taybrown3916 Год назад
What do u use to jack the truck up?
@dannycondeii
@dannycondeii 7 месяцев назад
Are both sides of the axle up and spinning?
@geoffsikma8957
@geoffsikma8957 3 года назад
I’ve got 19.5” on a car hauler to clean and polish. That’s tight
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
I agree. We do all the way down to 17.5" on heavy haul drop deck trailers. Those are not fun.
@alvinmarsh9878
@alvinmarsh9878 3 года назад
What color rouge did you use to color it . Green or brown?????
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
I always cut with brown and color with green.
@rodreel7136
@rodreel7136 3 года назад
i have a few a couple of questions if you don't mind. first , i am NOT trying be a smart ass, but an honest question to someone that has been doing this for some time. your video is the 2nd one i've watched where you wear the full face respirator, yet your face is black like you work in the coal mines. so, i am wondering how effective are they in your opinion? second question is with all the residue you have on your skin, (arms,face, etc} how much chemical absorption from the various items that you use, do you feel you are getting? i would like to try this on my personal stuff, but was curious about the questions i asked.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
The respirators are fairly effective if you leave them on all day and never take them off. But polishing dust just hangs in the air as they are super light particulate... If you take your mask off to talk or answer the phone the dust settles in your mask, around your mask, and on your sweaty face. I also put lotion on my skin every morning to help slow the absorption of the chemicals and metal dust into my skin. Aluminum dust is a very risky deal. Aluminum dust has been believed to be a leading reason for Alzheimers. I hope this info is helpful and answers your questions.
@TheRoadhammer379
@TheRoadhammer379 3 года назад
Everything is killing you, actually you were born dying out of the womb. 😂
@ivanvracun3746
@ivanvracun3746 4 года назад
How to protect all polished truck wheels before winter becasue salt will kill them
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Good polish will have wax in to help protect. But a regular washing and a hand polish helps lots too.
@dougkratz5269
@dougkratz5269 4 года назад
Love these long videos, with detailed explanation. I just pour a beverage,kick back,and enjoy as I learn. Thx
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I really appreciate that. Means a lot.
@thruthaseen.9892
@thruthaseen.9892 Год назад
How come not have been sending down the wheels?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Not everyone needs/wants perfection. So we don't always sand. I do what the customers want. This was a quick polish to get it shiny and save money. Thank you for watching.
@kumarpuri7752
@kumarpuri7752 7 месяцев назад
Hi Evan I really like watching it videos but I just saw the other guy come and do the polish on the one wheel while u did cutting on the other and all the dust blew towards him I tho l I should have him wearing a mask too
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 6 месяцев назад
Appreciate your watching and taking the time to comment. Thank you.
@derrickpete5070
@derrickpete5070 4 года назад
Going to try and polish my own wheels and tanks this weekend Great video
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Hope it helped. Thanks for watching.
@tylerjames4666
@tylerjames4666 4 года назад
How many hours did it take you?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
@@tylerjames4666 For the entire truck 2-3 hours.
@439530
@439530 4 года назад
A drill with a cone attachment would help in the tight spots I would imagine
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
sometimes yes sometimes no
@martin7mkings
@martin7mkings 2 года назад
What type / grit are the buffing wheels do they ale them for drills
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
I've never used them on a drill to be honest. I think you can but I have never tried it. Check out the video explaining buffs for a full explanation of what they are. There really isn't a grit wise.
@nicklange421
@nicklange421 4 года назад
Hey maybe you could help when I’m using my first stage of cut I’m getting a lot of sticky black spots that I have to scrub off by hand or it seems like it burns in if I don’t rub it off with a rag. Any help would be appreciated!
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Likely the piece you are working on isn't smooth enough to polish yet. Send pics to my cell and I can try to help you diagnose the issue. 92009790386. Thanks for watching.
@DynoDieselWagon
@DynoDieselWagon 3 года назад
Asphalt remover Citron
@blakefultz6087
@blakefultz6087 4 года назад
I haven't been doing this long maybe 6 or 7 months at the most and I have watched your videos since I started, and I watched this video the other day and then the next day and I done it the way you did in the video and it literally probably cut my time in half, I'm kinda slow at it, but all your videos are helping me so much and helping me do a better job and do it faster
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
That is awesome to hear. Time is always money and I'm glad to hear you cut your time down.
@gorillaprocustoms
@gorillaprocustoms 3 года назад
Great video. Love it.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Glad you enjoyed it! Thank you for watching and supporting.
@michaelgrahamthewheelking9977
@michaelgrahamthewheelking9977 3 года назад
How much do you charge for a job like this ??
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
All depends. Every job is different. My minimum pricing for simple cut and color is $25 a wheel. But every job is different. I charge by the piece and price according to the amount of work that has to go into it.
@SimplexSM
@SimplexSM 3 года назад
"22.5 is the tightest you'll work with" *Cries in 19.5*
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
lol Thanks for watching
@terryperrott8567
@terryperrott8567 Год назад
Great video full of info, Thank You. Question, I've got mine already done by hand but not as bright as a wheel. Sense I've got a hand shine could or can I just use the color wheel to finish it off? Newbie here.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
I never just color. But what I do is if the wheel is nice I start with a softer buff on my cut to reduce the amount of hashmarks. I will have a video out on this soon. Thank you for watching and supporting.
@user-up2kz6ws6m
@user-up2kz6ws6m 4 года назад
Are he using angel grinder ?or polish machine? I see its about twice the speed on the angel grinder 6000rpm vs polish machine 3000rpm
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I use a 6,000 rpm grinder. It is dangerous and risky for the record.
@cityterracetowing
@cityterracetowing 3 года назад
After you polish wheels. are you supposed to use some kind of sealant to protect the polish. Asking because a friend of mine says there is such a thing but I’m not sure Because I’ve never seen any truck polisher use one afterward.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Most polishing compounds have a ton of wax and sealant in it. After I color it I don't touch it with anything.
@chasedehmlow3767
@chasedehmlow3767 4 года назад
I need to step up my game from my cordless drill and mothers cones. Is there a variable speed Grinder you would recommend that would do both the cutting and coloring?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Yes I have links posted in my description on this video. I recommend the makita or the dewalt variable speed. Depends which brand you prefer.
@robsnyder3733
@robsnyder3733 8 месяцев назад
Curious why you didn't sand the wheels first
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 8 месяцев назад
This customer wasn't looking for perfection and just wanted to shine them up. The customer was super happy with the results and the price considering the usage they get. Not everyone wants a show shine and a big price tag. Hope this helps.
@irvingcobb4395
@irvingcobb4395 4 года назад
Shalom Evan I enjoy your vids Your left leg was blocking the view Also are you putting on more compound on the bar when you take the machine away from the wheel? Could not see what you where doing. Thx. Keith
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Yes. Sorry it is hard to keep the camera and body out of the shot. But yes. I was adding compound everytime I pulled away from the wheel.
@petercermak4095
@petercermak4095 2 года назад
Where do you get your buffing wheels for a grinder?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
goshineon.com carries all the stuff I use.
@cameronswartzentrubercd3664
@cameronswartzentrubercd3664 4 года назад
What do you mean by colouring? I'm a 310T truck mechanic and I want to dress up our concrete pumping trucks for the spring. Please anyone jump in here and let me know.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Coloring is the step that turns the lights on after cutting.
@coreylandry2440
@coreylandry2440 4 года назад
Awesome videos,very detailed and helpful. With help from your videos and my friend Keegan I'm polishing my truck for the first time.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
That’s awesome. Thanks for watching.
@chriskotaska8124
@chriskotaska8124 3 года назад
Well I am not all that good. My Dewalt 7in went flying a good 20ft and broke on the concrete. No parts available. So I got the exact same model Makita used in the video. You make it look so easy without handle on it or really hanging on. I got a death grip on my new Makita and doing the inside part is not going so well. I'll try your method. Do you think bracing off the hub mounted is easier for a beginner or dismounted?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
You should be do things the way that you are the most comfortable. Use the handle if that helps you. I know a lot of polisher who use the handle on the machine. I have been doing this a long time and have had this machine in my hands for 20 plus years, so it is going to look easy for me.
@dannyrlocklear
@dannyrlocklear 2 года назад
If u could come up with a motor with a rubber wheel that would go up against the tire and would have a pedal to step on to make it turn… That would be gold… lol. Great job!!!!!👍👍
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
I agree. I’ve been waiting on someone to create one. Lol
@shaunskelton1839
@shaunskelton1839 2 года назад
I have a Milwaukee variable up to 2000 rpm can you give me some pointers on these if possible. Thank you.
@zachcuster2700
@zachcuster2700 4 года назад
Win are you doing to Justin's polishing to the shop
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
No idea bud.
@ISEEORBS
@ISEEORBS 4 года назад
😂
@goodvibrations1544
@goodvibrations1544 2 года назад
How much do you charge to do a whole 18 wheeler??
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Price varies. I price by the piece.
@tycoonhooker4750
@tycoonhooker4750 3 года назад
Good Job fellow's !... I think I'll start doing my own after seeing your you tube.... Later....
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Wish you nothing but success. Thanks for watching and I hope you get it just the way you want it. Shine on.
@ayalacleaning
@ayalacleaning 2 года назад
Any link to buy that pad? Please 🙏
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Goshineon.Com
@ayalacleaning
@ayalacleaning 2 года назад
@@EvanStegerMetalPolishing found it. I'm buying the whole kit. Thanks!
@LMDTVNetwork
@LMDTVNetwork 2 года назад
What do you charge for polishing the rims like that? I am new to polishing and need help with pricing thanks.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
$30-85 each. But charge what your time is worth. Don’t focus on what I value my time at.
@salacevesjr7104
@salacevesjr7104 3 года назад
Great great job 👌🏼. What do you charge per wheel $?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Depends on how rough the wheel is and how much work I have to put into it. I charge by the piece based on what the customer wants for an outcome.
@russ7r
@russ7r 3 года назад
Nice work... what is your trick to get yourself cleaned up after, I end up covered in compound and takes a hour in the shower getting it all off.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
I actually have a video on this. LOL I use lava soap to scrub the tough parts and suave men's care 3 in 1 hair face and body wash to melt the rest away.
@phreaktor
@phreaktor 2 года назад
Who makes that orange wheel?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
Goshineon.Com we sell what we use.
@essentialone1
@essentialone1 Год назад
Why not use something like a Mothers power ball and cone that are made for polishing Aluminium wheels and cone for the tighter bits like lug nut area etc
@Delvirexx
@Delvirexx Год назад
U Where Doing 6000RPM Or 3000 RPM?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
I run 6,000
@marccrawford3358
@marccrawford3358 3 года назад
That was a shit job around the lug nuts.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing Год назад
Thanks for watching.
@Pall_Bearmasher
@Pall_Bearmasher 2 года назад
Polishing mounted on a wheel, but jacked in the air. A lot of people don't have access to doing this
@gabrielhenriquez9548
@gabrielhenriquez9548 3 года назад
Hey. I wanna polish my rims too but I wanna know the type of disc you guy's are using on the grander
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
We use goshineon.com/shop aluminum kit.
@melwatkins2470
@melwatkins2470 4 года назад
I'f you can please text me or let me know where you found the big polishing wheels, and the size thank you
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
goshineon.com/shop has them all in stock.
@tHeUtherGUy
@tHeUtherGUy 4 года назад
In order for the drive wheels to spin freely does all four rear tires have to be off the ground? What’s the steps to that no one can seem to give me a clear answer.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I’ll put out a video on that soon.
@Hayden1h
@Hayden1h 3 года назад
What wheel and compounds would you use to polish a pontoon boat to a show quality shine? I’m kinda at a loss with all the choices
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
You couldn't pay me enough to polish a pontoon to a show quality shine. But if I were to make a recommendation on how to do it I would say sand it perfectly smooth. Then cut 2 times with orange buff with brown rouge overlapping in different directions. Then doing an orbital hand polish with a rough metal polish like luhmi or something similar. Then I would cut with yellow compound and my show brown rouge. Then I would use a light metal polish like my time2shine aluminum polish on an orbital buffer. Then finish it with the 40 ply loose buff and my green compound. This process depending on the size of the pontoon will take days to complete and first time you put it in the water it won't be show quality anymore. LOL This is why I don't do pontoons anymore. LOL If just looking for a quick polish our 2 step aluminum kit is quicker and easier on goshineon.com
@kkbodyshop
@kkbodyshop 3 года назад
I got a zep kit and the wheels suck. Do you got to break them in or something?
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
What is a zep kit?
@kkbodyshop
@kkbodyshop 3 года назад
@@EvanStegerMetalPolishing a zephyr polishing kit.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
@@kkbodyshop I haven't used their stuff in years. I don't break my buffs in but maybe you do with theirs.
@davidgentz1731
@davidgentz1731 2 года назад
Well that's a tough way to make it Buck but this sure does look nice when you're done bro
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 2 года назад
It isn’t easy but I love it. Thanks for watching.
@kjohnson2931
@kjohnson2931 2 года назад
Any shops in Los Angeles area where I can go have this or can go to my truck and polish it?
@lovesaggu
@lovesaggu 4 года назад
Just a question . Can I use my 4.5 inch Bosch angle grinder or is this something else is he using.
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
Likely not. Most 4.5 inch grinders spin 9,000 rpm or higher. Way too fast for the buffs. Buffs are only rated for 3,500 rpm. I know I spin mine at 6,000 rpm but it is risky.
@AngelMartinez-xt1sy
@AngelMartinez-xt1sy Год назад
Pero el rin ya está listo para pulirse, Y el procedimiento de limpieza cuál es😡😡😡😡
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 11 месяцев назад
I just use a glass cleaner to clean them if I need to.
@AngelMartinez-xt1sy
@AngelMartinez-xt1sy 11 месяцев назад
@@EvanStegerMetalPolishing yo pulo con borla de mezclilla ,pero me deja rayones 🥲
@AngelMartinez-xt1sy
@AngelMartinez-xt1sy 11 месяцев назад
@@EvanStegerMetalPolishing y veo que tú pues y no se ven ,como le haces?🥲
@alanclarke5979
@alanclarke5979 4 года назад
22.5 or smaller is all we run in austrailia 😂its hard for polishing but practicle for every other reason
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 4 года назад
I can understand that. They are doable just tougher.
@893R6-w8t
@893R6-w8t 3 года назад
I think I'd have to have a machine to turn those wheels all day. Your feet are probably calloused and work hardened and legs well trained...but that's a lot of extra work. 500lb or so for two assemblies, plus turning the axle shaft and differential.
@893R6-w8t
@893R6-w8t 3 года назад
Oh, looks like you had the same idea 16:16
@EvanStegerMetalPolishing
@EvanStegerMetalPolishing 3 года назад
Yeah my legs are jacked. LOL
Далее
Лиса🦊 УЖЕ НА ВСЕХ ПЛОЩАДКАХ!
00:24
COMPOUND BARS EXPLAINED
6:16
Просмотров 94 тыс.
How To Polish A 22.5 Semi Wheel with SummerShine
13:27