How to Prep a Car for Ceramic Coating: Full Step by Step Guide

Подписаться 7 тыс.

Просмотров 378 тыс.

50% 1

Find the products we used here:
EPIC Prep Wash: www.amazon.com...
Iron Blaster: Fallout Remover: www.amazon.com...
EPIC Medium Compound: www.malcoautom...
EPIC Prep Wipe: www.malcoautom...
EPIC Ceramic Coating: www.malcoautom...
EPIC Leather Coat: www.amazon.com...
Protecting your car long term with a ceramic coating can be easy, see our step by step guide on how to ceramic coat any car, new or used.
1. WASH
2. IRON REMOVER
3. CLAY MITT/BAR
4. PAINT CORRECTION
5. PANEL PREP SOLUTION
6. CERAMIC APPLICATION
7. CURE TIME
BONUS: INTERIOR PROTECTION
Ceramic coatings can be intimidating, but they don't have to be difficult. To pull off a long-lasting layer of ceramic protection, it is more about taking your time during the preparation phase than having a high level of skill applying ceramic to paint.
Once the vehicle has been properly prepared with a wash and decontamination, it truly is the paint correction process that will make your ceramic coating pop. Because of that, it is also the most labor-intensive and time-consuming step.
Once you have the surface as pristine as possible you'll be ready to apply the ceramic coating of your choice. Make sure to follow the steps recommended by the manufacturer, for Malco's EPIC Ceramic Coating, it is a single layer application. This is to be applied in a cross-hatch pattern and then buffed off with a microfiber panel by panel.
Once finished, make sure you're allowing the proper cure time so you're ceramic has time to harden and won't be ruined by water or weather.
For more information on Malco products and to find more tips, tutorials, and content, visit our website and follow us on our other channels linked below:
Website: www.malcoautom...
Facebook: / malcoautomotiveproducts
Instagram: / malcoproducts

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 140

@Pr0fess0rConner-j8l 2 года назад

Very brief an yet detailed video of ceramic coating prep. Just what I needed got my first one coming in the mail. I know how to detail professionally but it's always better to sharpen your skills. Thank you!

@MalcoAutomotive 2 года назад

No problem! Glad you found it helpful!

@validatedcustomer604 Год назад

Good luck and wish you lots of success man i just got my first potential coating customers as well

@stholy1986 11 месяцев назад

3yo video but still really clear and concise to the point about maximum new car protection. I've just brought a new car and had this done so checking what steps are involved was great. Cheers

@MalcoAutomotive 11 месяцев назад

Thank you! We're glad this video could help.

@mm.stgermain 3 года назад

Lol a full step by step guide only to direct us to another video

@fernandorojas8851 3 года назад

If you don't have a garage could you put a car cover to try to let the ceramic coat cure correctly or would it mess with the coating? Thanks in advance, your videos are great and straight to the point, super informative!

@MalcoAutomotive 2 года назад

Hi Fernando! Good question. A vehicle must be garaged for the duration of ceramic installation to ensure no contamination of the coating. It can take up to 24 hours for the newly installed ceramic coating to cure. To achieve decent results with a quality ceramic coating, access to a garage is non-negotiable.

@CardFreak999 2 года назад

@@MalcoAutomotive Helpful stuff. I have an open garage (one side is open) - what's your definition of a controlled environment? The open side picks up some dust but I'm wondering whether I can do half the car first (the half towards the closed side), then turn the car around after a day or so and do the other side. Thoughts?

@MalcoAutomotive 2 года назад

@@CardFreak999 Unfortunately, if one side of the garage is picking up dust the entire garage will be susceptible to that, as well.

@muhanmuhanboy9414 3 года назад

Hi sir... can you please provide car care tips for beginners like me.. Its very helpful for me and other beginners as well... Thank you sir

@lowiedevolder1240 3 года назад

Would you recommend the same staps to coat a brand new tractor

@shawnm2113 2 года назад

Just wanted to say I freaking love that you want to ceramic coat your tractor! I'm not pro, not by any means. But I would go with the same principles if you have good paint on your tractor. Maybe have a professional detailer make sure your clear coat is in good shape as well, before doing the paint correction.

@AnandMaharaj-r5s Год назад

Good evening..i am vefy interested in this products..how can i do more

@MalcoAutomotive Год назад

The best way to learn more about acquiring products would be by messaging us on our social media pages. We have them linked in the description of this video 🙂

@henryfreeman6113 4 года назад

I love the leather coat!!!!! I did a review on it on my channel if anyone else was interested in getting it

@iONsJeepingAdventures 2 года назад

Little trick don't use tap water as it can have contaminates also use reverse osmosis water just a tip :}

@shawnm2113 2 года назад

Hey bro, question. I've got ridiculously hard water and I'm just getting into DA polishing and taking ultra good care of my new truck... How can I mitigate the damaging affects without shelling out a bunch for a reverse osmosis kit? Thanks for your time.

@heathstjohn6775 Год назад

I've pasted and edited the below from a site for general interest. Thanks. '...A ceramic coating's hydrophobicity can be lost if it's not maintened because of surface energy. Surface energy determines the behaviour of a liquid when falling on a surface. The lower the surface energy is on a surface, the more difficult it becomes for liquids to cling to the surface, to pool. Ceramic coatings are formulated for a low surface energy, which is what allows them to bead liquids. Surface energy isn’t stable, it isn't fixed. It rises as the surface becomes contaminated, reversing the hydrophobicity. Surface energy also rises as the coating abrades...' I don't want to advertise, but I'll say a product is available to find online which combines a car shampoo with an si02 ceramic coating. Thanks.

@MrMaddog0001 11 месяцев назад

Hi, i cant be bothered with the first 6 steps. can i just wipe the stuff straight on then take it for a drive to speed up the curing? If no response i will take it as a yes.

@MalcoAutomotive 11 месяцев назад

No, this cannot be done. Surface preparation is critical with a product like this which is why the first steps are necessary. As for driving it around, this will not increase cure time and will allow contaminants to embed themselves in the coating. A vehicle must be garaged for the duration of ceramic installation to ensure no contamination of the coating. It can take several days for the newly installed ceramic coating to cure completely. However, after 24 hours, the vehicle can be exposed to the elements, once again.

@mdsohalbhuiyan73 3 года назад

Hi sir How are you I hope you are doing well can you tell me how many layers for how many years ceramic coating

@MalcoAutomotive 3 года назад

Hello, layering will depend on what type of ceramic coating you're using, our EPIC Ceramic Coating which we are using here is designed to work with only one layer and can give you protection for up to 2 years.

@patiloba 3 года назад

Good brief explanation of ceramic coating.

@rosadosmobiledetailing3378 4 месяца назад

Where can I fine the product that you used?

@MalcoAutomotive 4 месяца назад

you can find our entire Epic line at this link! malcoautomotive.com/collections/epic%C2%AE%EF%B8%8F-complete-systems

@alejo7891 3 года назад

So I can’t use the car while it dries for 7 days??

@smokeabobreefer 2 года назад

He said cling on. lol I can’t even watch this now dammit. I can’t stop laughing

@shawnm2113 2 года назад

Caught that too haha All I keep thinking about is forehead wrinkles!

@henryfreeman6113 4 года назад

Cool!

@klutch14u Год назад

Does hot/cold or humidity affect those curing numbers? Also, I have a new truck, just turned 1K miles. After taking delivery I fully hand washed and waxed (DA polisher) it in prep for winter, does that wax have to be stripped?

@MalcoAutomotive Год назад

Hello @klutch14u! Our EPIC PRO Ceramic Coating should always be applied in a garage and factors such as heat/cold and humidity may affect curing time. For cure time, it may take up to seven days to fully cure and we require the vehicle to sit for a minimum of 12 hours before being driven. We strongly recommend allowing the vehicle to cure for 24 since this is when your vehicle is able to get wet and be exposed to the elements once again. Beyond this point, your vehicle is fine to be driven again. As for the wax on your vehicle, this will need to be stripped prior to application of our ceramic coating for proper and long-lasting results.

@ashleyt.784 Год назад

Question, I have had had several coatings requiring to do alcohol wipe down. Whatś the scoop???

@MalcoAutomotive Год назад

Hi Ashley! Good question. You want your surface to be as smooth, corrected and contaminant-free as possible before applying a coating. The coating will lock in whatever is underneath and protect from future contamination, etc. Using an alcohol-based solution as the final step before applying a coating is vital to removing any remaining residue etc. from the polishing/correction step. This will also ensure full and complete adhesion of your coating. Hope this helps!

@TheSantos173 Год назад

Does this mean I would have to let my car cure 7 days in the garage without driving it? 😕

@MalcoAutomotive Год назад

Hi @thesantos173! Our EPIC PRO Ceramic Coating takes 7 days to fully cure, but it is not undrivable during the entirety of that time. After being applied, the car CANNOT be driven for 12 hours and needs to be kept dry from rain and other elements for 24 hours. But as long as the weather is clear, the vehicle is able to be driven after a minimum of 12 hours!

@Arash.vahidzadeh Год назад

Can ceramic coating apply on heated side mirrors and interior display

@MalcoAutomotive Год назад

This is not how we would recommend using this product.

@jeremyjohnson4693 4 месяца назад

So I bought a brand new type r 2 months ago they already had the $1800 coating done to my car and has 7yr warranty should I not worry about doing anything to it since it's covered for that time or should I do certain car care steps for better care to it?

@MalcoAutomotive 4 месяца назад

Hi Jeremy, nice purchase! We would recommend you use a ceramic coating maintenance product like our Epic CR2 Hydro Protect spray after your normal routine car washing to extend the life of your ceramic coating.

@larrytaylor8837 3 года назад

I wanna learn how 2-do ceramic Coating

@firaas4667 3 года назад

Iron removing for wheel also can use for bodypart?

@christianscioscia253 3 года назад

yes it is safe on paint.

@chuckwalla2967 2 года назад

How long does the coat last on the outside?

@MalcoAutomotive 2 года назад

Hi! Our original EPIC Ceramic Coating formula provided protection for up to 2 years. However, we have discontinued that version of the product and will soon be offering an enhanced coating. Be sure to follow us on social to be one of the first to see it when it launches!

@HarryBallsss 2 года назад

Just watch the video!!!! Omgggg!!! He literally says it!!

@43210devin 2 года назад

Can you use the seat treatment on white leather seats?

@MalcoAutomotive 2 года назад

Hi Devin! If you are referring to EPIC Leather Coat, this product can be used on any automotive leather or vinyl surface and should not stain or discolor. However, we highly recommend testing the product in an inconspicuous area prior to full application.

@ItsonlyJoc Год назад

Worse step by step I ever seen

@randallfield6492 2 года назад

Stopped it at the 0.05 mark. Don't want to see a foreign car.

@slow_rednline4874 2 года назад

Cry about it

@plant-basedmd8155 Год назад

Can one do ceramic coat on PPD? asking because I have PPd on the front of my car and not the back half.. I want to do ceramic coat on the car and not sure if I can do a full ceramic coat

@smokeabobreefer 2 года назад

Cling on @ 1:08 💩🚽 great video tho ya just made me laugh when you said clingons

@mike_paschos 8 месяцев назад

What would a job like that cost for this car? Just curious. Thanks and great video!

@yashraj7491 6 месяцев назад

How many layers of ceramic coating should be applied?

@ipfmcd 8 месяцев назад

Quick question, for reapplication, should we got through all the steps again? Stripping back existing ceramic to apply new coat?

@ipfmcd 8 месяцев назад

As in, the 3-6 month re-application you mention at the end.

@rickdoyle4981 3 года назад

Nice M3! I just had my 19 M4 CS ceramic coated a few months ago. Wonder if they have a Good coating product though. It was local guys that did it. They are the owners of Exoforma and used their Ceramic coating with Graphene. So they call it a graphene coating

@frank-zf3cd 10 месяцев назад

Graphene coating is slightly better than ceramic coating alone

@michaelcamp8702 3 года назад

This video was pretty insincere. Lack of detail and mostly just trying to sell your product. You left out dozens of tips and tricks and at the end it’s just like “here buy our products now”

@MalcoAutomotive 3 года назад

Make sure it hazes for at least 3-8 minutes. It really depends on humidity and amount applied.

@emrahpoland 2 года назад

Can somebody explain how to orepare "prep wipe" solution/liquid? Can it be for example %15 IPA - distilled water mix???

@MalcoAutomotive 2 года назад

Hi Emrah! EPIC® Ceramic Final Prep Wipe does not require any dilution. Simply spray onto the vehicle surface and wipe thoroughly with a clean microfiber towel.

@Arash.vahidzadeh Год назад

Can I use also normal ceramic coating on interior plastic parts and buttons?

@loganshoemaker938 Год назад

Thank you for the straight forward video!

@MalcoAutomotive Год назад

You're welcome! We're glad you enjoyed it!

@telmanasker8317 Год назад

Hi. Thanks for the video. Can it be washed one more time after polishing a car hi upon to puting the ceramic on ? I mean does it make any negative effects?

@MalcoAutomotive Год назад

It depends on the product you are using. If you have corrected your paint with a filler-free compound, washing will not hurt anything. If you've used a wax or polish that contains fillers, washing will remove some of those, making scratches etc. more noticeable again. The proper order is to wash, correct then prep with a product like our EPIC Ceramic Final Prep Wipe before applying your coating.

@imeedalapag9734 2 года назад

How to order ur product an how much

@MalcoAutomotive 2 года назад

Hi Imee! The best way to order product is from your nearest Malco Automotive distributor. Can you share your city/state/country so we can best direct you? Thanks!

@giannismitropoulos5456 3 года назад

Very good your video mate, keep it up! 🍀

@texasblaze1016 3 года назад

You mean vary?

@giannismitropoulos5456 3 года назад

@@texasblaze1016 very good hahhahaha thank you

@daltonschannel8405 2 года назад

If I'm using a buffing compound for paint correct, then why does the car need to be clay bared? I'm asking because it seems like the compound would do what a clay bar would do even better.

@MalcoAutomotive 2 года назад

Hello! Claying and correcting/compounding accomplish different tasks to get a vehicle surface to its final finish. The clay bar (or clay alternative) is designed to remove imbedded contaminants that are not removed through general washing. Claying should be done prior to buffing or waxing a vehicle, to avoid working those contaminants into the surface and micro marring. Compounding or correcting the surface is meant to smooth the surface, reducing and removing light scratches, oxidation and defects, which clay bars do not have the ability to do. Hope this helps!

@sherlockholmes773 3 года назад

please turn on your subtitle videos

@bhupeshpandey4461 Год назад

may I know the total hours of process for complete ceramic coating?

@MalcoAutomotive Год назад

There is a lot of variation between individuals as to how long this process can take. It may take anywhere between 4-6 hours depending on a detailer's experiences, how much paint correction the vehicle needs, and many other factors. But it is expected to take a few hours when accounting for vehicle prep work and application of the coating. It is also important to remember that the vehicle must sit in a controlled environment for a minimum of 12 hours after the coating is installed to allow it to fully cure.

@LaRoseDetails 2 года назад

What do you need to do the following 7 days after? You said a week maintenance? Thanks

@MalcoAutomotive 2 года назад

Hello! I believe what you are referring to is the 7-day bonding time, mentioned toward the end of the video. After installing your ceramic coating, you will want to keep the vehicle in a controlled environment for at least 12 hours, while keeping it dry for a minimum of 24 hours. Complete bonding with the paint can take up to 7 days, so it is vital to have garage access during this time. No further maintenance is required during this time. However, allowing the coating to cure completely is essential to the longevity of the finish. Thanks!

@TheSantos173 Год назад

@@MalcoAutomotive is it necessary to keep the car in the garage curing for those 7 days?

@MalcoAutomotive Год назад

@@TheSantos173 Most ceramic coatings can reach a 90% cure in about 72 hours. Depending on the coating, it could take up to 4 weeks to reach 100% cure. With our EPIC PRO Ceramic Coating, the vehicle should remain in a covered/controlled environment for at least 12 hours. You want to keep the vehicle dry for at least 24 hours after coating. And, garage access is vital for 7 days after coating to allow full bonding. During this 7 days, the vehicle does not have to stay in the garage at all times. However, you will want to store the vehicle in the garage when you are not driving it, during this time, and avoid washing, applying pressure etc.

@giorgitatarashvili197 2 года назад

Where are you located ?

@MalcoAutomotive 2 года назад

Hello! We have partners and distributors worldwide. Can you share your location, so we can point you to your nearest Malco distributor? Feel free to message us on Facebook for more privacy. Thank you!

@brandontravels5825 2 года назад

great short video

@Ben-nx7yy 3 года назад

Excellent tutorial thank you

@PatiencesMom 3 года назад

Can this happen if you have chipped paint pecks? A few gouges too.

@papajon549 2 года назад

thank you for sharing.

@Rtcam345 2 года назад

Can you ceramic coat outside if you have no garage?

@MalcoAutomotive 2 года назад

Hello! A garage or other closed area, free of dust or contaminants is required for a quality ceramic installation. Otherwise, you risk having this contamination compromise your finish, as the coating dries and cures. It is recommended to keep your vehicle in a contaminant-free garage for at least 24 hours, following application.

@standelasanantone2180 2 года назад

Should I put ceramic coating on top of PPF?

@MalcoAutomotive 2 года назад

Hi Stan! This is a personal choice. Adding ceramic to a PPF may add enhanced durability, but you may not need it. It is also important to note that the quality of the PPF will affect the longevity of the ceramic coating. Cheaper PPFs can shrink, etc., causing the layer of ceramic coating to crack or wrinkle. It is not a necessary step to take. However, some people do apply both. It is up to you!

@xyzzyxxzy Год назад

I love when all those detailer pros on youtube show the steps on already done prep car 😁 Come on do it on dirty car step by step and show us results 😄

@blackpillfitness9136 Год назад

To be fair there were swirl marks that you could see before they compounded. And you could see that the swirl marks were gone afterwards.

@michaelscott5032 2 года назад

Fantastic video car is very Shiney probably looks like a mirror in the sun. Great diy video for us that like to learn as we go!

@MalcoAutomotive 2 года назад

Glad you find it so helpful! New ceramic content to come, so stay tuned!

@Jetski270 3 года назад

So im confused , if it's a daily driver and you add the costing, can you drive the car soon after? What if it rains on day two or during the evening your out driving ?

@MalcoAutomotive 3 года назад

We recommend you leave the car in a controlled environment for 12 hours before driving, and at least 24 hours before you get it wet.

@radiomaster200 Год назад

What about for a brand new carbon hood? Do I really need to iron remove that?

@MalcoAutomotive Год назад

If the hood is new and you do not feel that there are iron deposits or contamination present, then you should be okay to skip that step. However, even new parts and cars sometimes have other paint defects. So, you will still want to be sure to wash, correct and prep the surface prior to ceramic application. 👍

@radiomaster200 Год назад

@@MalcoAutomotive thank you and yea, there are a few spot that look hazy so I will correct that.

@carlosvindas2838 2 года назад

I need a link for the products

@MalcoAutomotive 2 года назад

Hi Carlos! You can view our entire product assortment on our site at malcoautomotive.com -- To make your purchase, contact your local Malco Automotive distributor. If you need us to help you find one, let us know!

@rogiervantilburg3440 2 года назад

Thank you!!

@MLinktheprophet 3 года назад

Are these products available as a kit?

@MalcoAutomotive 3 года назад

Hi! We are currently in the process of bringing you a next generation Ceramic Coating, so stay tuned for that toward the end of this year! Until then, check out some of our other EPIC Ceramic System products: www.malcoautomotive.com/EPIC__Ceramic_Coating_System-list.aspx

@mdsohalbhuiyan73 3 года назад

Thank you sir

@MalcoAutomotive 3 года назад

Of course!

@kamrynsutton5156 2 года назад

Does your iron remover stink ?

@MalcoAutomotive 2 года назад

Our fallout remover Iron Blaster is one of the strongest formulas in the industry. It does carry a pungent odor! We recommend applying this product outdoors or in a well-ventilated area. Thanks!

@claudiadavies5110 2 года назад

Absolutely brilliant, thanks heaps 🙂🙂🙂

@jamesamoah7832 2 года назад

😎💯

@jessejohnson9199 3 года назад

What are you using for the panel wipe

@Splot2 3 года назад

Usually either just distilled water or a light isopropyl alcohol mix 15%-25%

@scalpelsword2642 3 года назад

How about the windshield?

@MalcoAutomotive 3 года назад

Hello, you can apply EPIC Ceramic to the wind shield safely. You'll want to prep the surface in a similar way by making sure it is free of dirt, water spots, and any kind of waxes or other protective layers. A standard wash and prep spray similar to the steps here will do in most cases, if you have heavy water spotting a water spot remover my be required to remove them prior to you prep wipe step. Finally, while applying the ceramic, you'll want to be careful that you are evenly coating the glass and not leaving any high spots that might affect visibility.

@dragon0361 3 года назад

This guy make chemical guys look like people who wash cars on the side of the road.

@MalcoAutomotive 3 года назад

We passed your comments along to Bill and he appreciates it! Thank you!

@berlitnepomucenoofficial6627 3 года назад

Amazing

@davidvelez6923 4 года назад

The Banana Nano Banana Creme wax stain the trims ?

@MalcoAutomotive 4 года назад

Hello, if it is allowed to dry on the trim it can cause staining. So we would recommend avoiding trim as much as possible and thoroughly cleaning it as soon as possible if it gets on trim.

@arturoelizondojr6420 2 года назад

how can I do it just to polish the car not to do a coating

@MalcoAutomotive 2 года назад

Hi Arturo! You will want to make sure you wash, decontaminate and correct your vehicle paint with a compound, before polishing.

@arturoelizondojr6420 2 года назад

@@MalcoAutomotive OK thank you

@arturoelizondojr6420 2 года назад

do I use iron

@MalcoAutomotive 2 года назад

@@arturoelizondojr6420 An iron remover is a great decontamination step to take and is recommended before applying any wax, sealant or coating.

@arturoelizondojr6420 2 года назад

@@MalcoAutomotive OK thanks you very much

@Cleaning_Hero 3 года назад

Are there products that would achieve a longer life-span to the ceramic coating?

@MalcoAutomotive 3 года назад

Hello, the best thing you can do is to ensure that you're using proper washing techniques and avoiding automatic brush washes. Another option is to use a ceramic spray such as our EPIC CR2 as a topper to keep the coatings gloss and protective properties for an extended period. You can find that here: www.amazon.com/Malco-Hydro-Protect-Ceramic-Spray/dp/B07ZHM2JQP

@PunjabiKush 3 года назад

I like you how you say if your cars brand new or new to you. Just say New or used man. I have a brand new car and am trying to see if I should buff my car at all. It has no swirls.

@ryanneiman5704 2 года назад

that isn't how you clay bar...

@MalcoAutomotive 2 года назад

Hi Ryan! No clay bar is being used in this video. Our dual-sided Clay Wash Mitt serves the same purpose, as it uses advanced clay polymer technology to remove tree sap, paint overspray, water spots and rail dust from vehicle surfaces. The fabric side is designed for general vehicle washing. The other item you may be confusing for a clay bar is our ceramic Applicator Pad. This pad, in conjunction with a clean, suede cloth, is used to apply EPIC Ceramic Coating.